HT201363 i forgot the 4 number code on my old iphone 4 and my wife is wanting to start using it, any suggestions
I forgot the passcode on my old Iphone4 and tried to mant times, know it says to connect to itunes and thephone is disabled, what can I do?
Hello there, carterfrommo.
The following Knowledge Base article provides steps for resolving your issue:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Similar Messages
-
Can I switch back and forth the same sim card between an old iPhone 4 and a new one never used in order to activate the latter? Should I use same Apple Account? Should I activate it via WiFi or iTunes? I am filtering on the MAC no and I cannot read that number from the new iPhone without having it activated??!!
All I want do is to have the new phone activated and then tested!
Ciao // MufftasYes, you can do that.
-
While updating the firmware Update, i disrubted the download and now my macbook won't start up! Any suggestions on how to fix it? i only see a black screen and when i press the power button i hear the noise that it would make if it was going to start up. But i only see black.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
When I try to start my Garageband 6.05,I get a repetitive message that the core audio midi will not start. If I choose to ignore it, report it or reopen it, it just keeps coming up and garage will not load or start up? Any suggestions? THanks
I'm just guessing at this point, but I suspect that you have installed a midi driver on your computer for some external device, and, since GarageBand's midi capabilities are limited in some ways, chances are your audio/midi driver is asking GarageBand to do something more than it's made to do, causing core audio's midi function to crash.
If that's the case, you might want to try adjusting your midi device's driver settings, or uninstalling your midi device's driver, and then see if GarageBand starts up normally without it. -
i Want to clean out my iPad and bring back App Store and YouTube they disappeared. I am not computer literate.
IIf you forgot your restrictions passcode, you have to restore your devoce using iTunes and you will totally erase the device. There is no way around it. if by some chance you have a backup that does not contain the passcode that you can't remember, you can restore that backup to remove the passcode. Otherwise, restore as new.
You will have to download your eBooks again. If you are purchasing books for the iBooks store, most of those can be downloaded again at no charge as long as you use the same Apple ID that you bought them with - and as long as they are still available in the iBooks Store. -
What's the difference between 2 Skype apps on iPhone: Skype and Skype WiFi?
I have 2 Skype apps on my iPhone: the Skype iPhone app and a "Skype WiFi" app. What is the difference and which should I keep and use?Thank you.
Hi,
Learn more about Skype WiFi here: https://support.skype.com/en/faq/FA10008/what-is-skype-wifi -
How do I free up space on my iphone 4S?
Drag it from the Music item of the Finder's sidebar to an external drive, launch iTunes with the Option key held down, and point it there.
(59635) -
Apple TV doesn't turn on after power glitch. Unplugged both cords, left an hour, and plugged back in with no success. Suggestions?
check out this discussion.
you should definitely get a decent UPS to protect your investment.
something like the APC Back-UPS ES 700 should suffice. -
I lock my mac with find my iphone feature! now i forgot the 4 digits code
hi
I lock my mac with find my iphone feature! now i forgot the 4 digits code and i can't access to the computer.
the fact is that someone stole my Mac about 1 and a half years ago! so the day after i realise my mac wasn't in the my house i immediately blocked by find my iphone with the hope to find but i didn't get nothing, then after 1 year i received a message telling my that my Mac was successfully blocked and my mac used to call "Kevin Gr. MacBook air" and the message i got from apple said that "Dou MacBook air" was successfully blocked. that time i realised who was the one who stole my Mac a "friend" :/ he was the only one that i know that uses that nickname for everything! well i didn't did much because i wasn't that sure that he stole it! but one day in a party in his house well not a party but all friends hanging out, they decided to go to the disco so i said that i was very tired and i managed to stay at his home, so when they left the house i decided to search for my thing, and after 30 min of searching i finally found all the things they stole :/ and my mac was there! so I immediately took all my thing and left the house! i called him telling him that i found all my things and ill took them home! he was stunned for a moment and then he said sorry for everything, but all that things he was going to buy! but he knew it was our stolen stuffs and blah blah blah
well now i wanted to open my computer and its locked with the 4 digits code that i put a year ago and i don't remember, there is a way to unlock it? or i just need to reinstall the OS!
thank you and sorry for my english.You are not inputting the correct password. Please visit
support.apple.com/kb/PH11117
and learn how to reset your password. If you still cannot get in it's time to take it into your local Apple Store or AASP. -
So I had put a lock on my IPhone and forgot the pin number! I am now locked out! It says to connect to itunes so I did but nothing has happene my phone is still locked! Someone help!
Follow the directions here to force the phone into recovery mode & restore it:
http://support.apple.com/kb/ht1212
This will remove the passcode. -
I forgot the four digit passcode to get on my iphone5 and its disabling my phone, how can i got past this to get on my phone?
iOS: Forgotten passcode or device disabled after entering wrong ...
-
10-number-code to activate old CS2 Premium Version
Got an payed CS2 Premium with official serial nummer. Want to install it on my old Macbook, it's impossible to get the 10-number-code to get it running. No server support, no phone support anymore. C2 download on adobe page is only the standard version. Can anybody help? How can I get this code to activate or does nobody at Adobe works on that anymore? Greetz Marc
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Mylenium -
I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?
I am talking about the Ver 3 download link that came with the purchase email.
That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
/Applications/Aperture.app
/Library/Application Support/Aperture/
~/Library/Application Support/Aperture/
Leonie -
I have two pnones on my account...my iPhone 4 and my wife's crappy old Samsung. I pre-ordered an iPhone 4S and plan to give my iPhone 4 to my wife and I will use the new 4S. How do I switch the 4 to her number once I make the switch to a new 4S?
Just call yur provider and they will set it up with you.
This is what I do, when I get a new iphone and give mine to my wife. -
Hi, I want to use my number for iMessage on my iPhone only and on my macbook pro use my apple id/email and not my number, how do i do that? before i updated my phone thats what it was like but now that ive updated i dont know how to change it. Also how do i stop the iMessages on my mac appearing on my phone. can you please help. Thanks
I tried that but on my iphone i can only click on my email and my number is checked but its in grey doesnt allow me click on it and on my Mac, its the opposite, my email is checked but in grey so doesnt allow me to click on it. im realy confused
Maybe you are looking for
-
My Mac Power G4 Went to sleep and I Can't Wake it Up!
Must have felt I didn't love it anymore. I bought it so long ago, I can't remember when - only that in the interim I've also acquired a Mac Notebook, an IMac that eventually "wore out" and a duo processor iMac to replace it. Still, I've also kept my
-
Since I installed Snow Leopard, when I go to my mail to send a New Message I used to be able to open the address book in New Message to put in my group mailings with one click. Now that doesn't work. It only takes the 1st name in the group. Now What
-
Replacing library with template deletes portlet preferences
Hi, If I have to deploy a new version of our portal, with changes to the .portal file I have to make a dummy desktop from the .portal file, and then say yes to replace library with template. If I do this however all my portlet preferences are resat t
-
Getting error trying to query db through HS connection
I am trying to set up a new heterogenous services connection to mimic one on a 10gr2 server. I went through all the trouble of setting everything up, including listener and found out I had to use DG4ODBC instead on 11.2 as they had axed the 10.2 prog
-
I want to build a mobile application (focusing on Android) where I can allow the user to choose from a set of preloaded videos (.MP4, but I can probably do other formats, to include flash - since I'm focusing on android). This is an early proof of co