HT201364 Macbook pro 15 (2009 released) has recently installed OS X 10.5.8 Leopard

My macbook pro 15 (2009 released) has recently installed OS X 10.5.8 Leopard but not OS X Snow Leopard. Can I still upgrade this to OS X Mavericks?
What should I do? Should I need to install Snow leopard v10.6.8 first? So I need to get/buy the software OS X Snow Leopard from Apple frst? Please help:(
Thank you!
Gemma

First, make sure that your Mac is one of the supported models that can run Mavericks
http://www.apple.com/au/osx/specs/
And also check that your Apps are even going to work on Mavericks or will need to be updated. Any PPC programs (Office 2004 etc.) will no longer work.
http://roaringapps.com
Cheers
Pete

Similar Messages

My Macbook pro mid 2009 just has 2 GB Ram I want to upgrade 4 GB Ram Is it possible in Apple store

My Macbook pro mid 2009 just has 2 GB Ram I want to upgrade 4 GB Ram Is it possible in Apple store

Apple usually doesn’t sell RAM for older Macs. You’re probably better off buying it from a source such as OWC or Crucial and installing it yourself.
(124083)

I have the newest Macbook pro with retina display, I recently installed Photoshop elements 11 and have noticed that elements 11 is very pixelated. Is there a way to fix this, or is elements 11 just not compatible with the new retina?

Is there a way to fix photoshop elements 11 from being pixelated on my new Macbook Pro Retina Display?

You may want to reference http://forums.adobe.com
The problem is mentioned here: http://forums.adobe.com/message/5647016#5647016#5647016

Negotiated Link Speed on MacBook Pro mid-2009 with Kingston SSDNow v300

Hi,
I have a mid-2009 MacBook Pro (13") with Kingston SSDNow v300 SSD drive with Mavericks OS X installed.
I've noticed from different forums that many users have the same problem that I have: SSD drive's Negotiated Link Speed is only 1,5 Gbps, although MacBook Pro mid-2009 should support 3 Gbps speed.
My system has EFI 1.7 firmware update (MBP55.00AC.B03) installed in and System Info says that 3 Gbps Link Speed should be possible:
NVidia MCP79 AHCI:
Vendor:    NVidia
Product:    MCP79 AHCI
Link Speed:    3 Gigabit
Negotiated Link Speed:    1.5 Gigabit
Physical Interconnect:    SATA
Description:    AHCI Version 1.20 Supported
Many users have tried to reset NVRAM and SMC and I have also done these steps, but with not any improvement.
Some users have mentioned that MacBook Pro mid-2009 has a poor SATA ACHI chipset (NVidia MCP79) and SATA III SSD drives won't work on SATA II speed unless SSD drive is forced to work on SATA II speed by firmware update or by some tweaking tool. Is there this kind of tool available for Kingston SSDNow v300?
One user says that he got 3 Gbps Negotiated Link Speed on Mountain Lion, but after installing Mavericks, speed dropped to 1,5 Gbps (https://discussions.apple.com/message/23549859#23549859).
So, is there any way to get Negotiated Link Speed to work on 3 Gbps on Kingston SSDNow v300 with MacBook Pro mid-2009 (for example by installing an older version of Mac OS X) or do I have to buy a new SSD drive from another manufacturer to get 3 Gbps Negotiated Link Speed to work on my machine?
If the last option (to buy a new SSD drive) is the only option, would it be wise to look for an older model, a SATA II drive, (maybe OCZ Vertex 2) to get 3 Gbps speed?
Thanks!

Hi
I was just as frustated as you after installing the Kingston v300. I mean it's a solidly built drive with the reliability of kingston (I've been using their RAM for years and years in my desktop PC without problems). Unfortunately, for a the last 3 months I had it in my 2009 unibody white macbook, it was stuck at link speed 1.5.
I've been searching in forums since then without any solution. Even the update for bios is not available for my model.
I just tried the SMC reset after reading the blog.
http://thenextweb.com/lifehacks/2010/12/04/how-when-why-to-reset-the-pram-smc-on -your-mac/#!w3XEY
On reboot, everything seemed faster, so I checked the negotiated link speed and it was at 3 instead of 1.5! Yay! Then I checked the disk transfer speed on Blackmagic Disk speed test and it roughly doubled from 138 to 260MB/s. Now, I'm not going to shutdown or restart...
I hope this post is useful for people like me stuck at 1.5 Gbps speed. Good luck

Macbook Pro from 2009 install OSX problem

I got the 17 inch Macbook pro from 2009. There was installed Maverick before, but previous user deleted all from the hard drive.
Previous owner explained to me that I need to instal Snow Leopard and after that to upgrade it to Maverick OS X.
Now when machine is started it starts with OS X Utilities an i can choose one of following:
Restore from Time machine Backup - I do not have any backups, since I got machine, I want clean new installation.
Reinstall OS X - this opens new screen where it tries to install Maverick OS X, whenever I proceed it throws the error, and no progress is made.
Get Online help - opens Safari
Disk Utility
What are my best next steps, to get this Macbook work again? Ordering SnowLeopard from Apple Store http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard ? And after it to upgrade it to Maverick? Is there a way to order this and download without waiting it to be delivered?

Is there a way to order this and download without waiting it to be delivered?
No, you need the disk. If you do find a download it is illegal and may be corrupt.
I would get the disk, boot off the DVD, and after the language menu choose Utilities/Disk Utility. Repair the disk and repair permissions. Then select the partition tab, select the partition and erase the disk formatting as Mac OS Extended (Journaled). Click the Option button and select GUID. Then click erase. When it is erased, install 10.6, then use the combo update to get it to 10.6.8.
10.6.8 Combo Updater
Run Software Update (  menu) until there are no more updates. Then go to the App Store, sign in with your Apple ID, and download Mavericks.

Hello All, I have a Model - MacBook Pro Laptop and the screen recently turned grey giving me zero visibility or access to the computer. Has anyone else seen or had this problem? Is it fixable or should I get a new unit?

Hello all,
I have a Model - MacBook Pro Laptop and the screen recently turned the colour grey, giving me no visibility or access to the unit.
Has anyone had or seen this problem before? Can it be fixed? I had a repair guy from my local Mac Store take a look at it - he said I needed a whole new screen and top of the computer, but this didn't fix the problem. I took the unit home unrepaired, and a week later it was all of a sudden working fine.
What is happening with my Laptop? Once this happens (grey screen) does it mean that it's going to become a chronic problem?
Please advise....Thanks

It's kind of difficult to diagnosis your problem without a visual clue, because there is a (mostly) software based "gray screen" at boot issue.
But if you got the screen replaced, took it home and now it works, why the repair shop didn't get it working before it left the store is beyond me.
Unless the repair shop is a authorized apple reseller/repair, I wouldn't have taken it to them, and of you did, they should have fixed the issue right away.

On a MacBook Pro Mid-2009, i got a black screen.

Hi Everyone,
I have a MacBook Pro Mid-2009 17inch.
I use to run Windows XP for gaming. Recently, my logic board has been replaced. Now, i am unable to boot into my Windows partition : i am getting a black screen.
I deleted it with BootCamp assistant and created a new one.
Now, when i insert the windows install dvd, after reboot still stuck on black screen. I tried with XP install dvd and a brand new windows 7 install DVD.
Any suggestion accepted.
Kind regards,

Try smc and pram resets:
SMC
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.
http://nwsinglespeed.hubpages.com/hub/Do-You-Know-About-Apples-Flat-Rate-Repair- Pricing
Make a Genius Bar appointment, they have extensive testing equipment and have evaluated for FREE.
They will give you your options.
If it is your Logic Board ask about the following:
http://www.apple.com/retail/geniusbar

13" MacBook Pro (Late 2009) - nVidia 8400m stuttering graphics.

Recently, my nVidia 8400M GPU seems to have started acting up on my 13" MacBook Pro (Late 2009). Whenever it is coming under a lot of heavy graphics i.e. games, the FPS rate begins to drop - understandibly, this is normal. However, it's predictability and duration is not.
Both under Mac OS X Snow Leopard and Windows (via Boot Camp) the problem occurs and will occur under any heavy graphics. Currently, the only games I play on my MacBook are Source based (Portal 2, L4D2, Team Fortress 2) and Minecraft; all of which have the issue.
The issue is that once the game begins, the FPS is fine, usually hovering around 24-30fps on full resolution with decent settings which is high enough for fluid gameplay. However, 5-10 minutes into gameplay, the FPS plummets to around 12 fps in a reoccuring pattern (demonstrated as best possible below with '-' being smooth gameplay and and '.' being a 'stutter');
----- . . . ----- . . . ----- . . . ----- . . . ----- (and so on)
It's fairly rapid, the smooth might last for a few seconds, stutter; smooth, stutter, smooth, stutter in a rhymic predictable pattern. At first, I attributed it to possibly a flaw in the Source code for Mac, it's still fairly new. But then Minecraft started. And now it occurs on Windows so it must be a hardware issue.
After maybe 10-15 minutes, it'll resume a normal FPS that's playable (or oddly, if the map is changed or refreshed on TF2, that kick starts normal FPS). Once it's settled down, you could close the game, come back hours later and wouldn't have the issue - if you put the Mac to sleep or shutdown, it'll occur again on next boot.
Is this a common occurrence with the 8400M on MacBooks? I used to play TF2 on Windows via Bootcamp before it was released for Mac and can never remember having this issue.
Is this something that could possibly be resolved instore? My MacBook Pro is still under AppleCare, would it be worth them having a look at it?

You say recently.... I suspect that it has something to do with the 10.6.8 you have posted on the bottom left of your specs. I too had this very same problem and it turned out to be some apps that were not yet optimized for 10.6.8 I had to pop the install disk in and downgrade to 10.6.7... problems have disappeared since then. Good luck! Check your activity monitor and see what the CPU usage is when you boot up also check your system memory... After the update my computer the new MBP i7 2.2ghz was using 50% of the cpu at idle didn't notice it until I finally checked activity after having sluggish performance editing in aperture and restarting multiple times.

How to make a MacBook Pro (mid 2009) work properly with a 3M Streaming projector?

Ok, so I have a MacBook Pro (mid 2009), a 3M Streaming projector and very annoying problem.
When I connect my MacBook Pro with a Mini Displayport to HDMI adapter to the 3M projector, I get a pink tint, like a filter over the image, it’s very frustrating.
This are the tests I’ve done:
1. I tried the adaptor and the projector on a different (more recent) Mac -> It worked fine.
2. I tried connecting my MacBook Pro to a different not HDMI but VGA projector -> It worked fine.
3. I used some Terminal code I found on the web to force the Mac to send RGB signal, don’t know if that has anything to do with it, but I tried anyway -> Didn’t work
So I’m confused, it’s not the physical port of my MacBook cause it worked fine with a VGA projector, It’s no the 3M projector and it’s not the Mini Displayport to HDMI adaptor cause it worked fine on a different Mac.
So what is it?
I’m totally desperate, I haven’t been able to solve this problem, so if you guys can help me you will be my heroes.
Thanks.
– 13" MacBook Pro (mid 2009) runing Mavericks.
– 3M Streaming projector Powered by Roku.

Yes as Clinton says this is correct.
I've used a Sata to USB connector which is only a few pounds instead of an enclosure for the clone, but then I wasn't keeping mt old HDD. But that's an option if you don't need it.
I also use Carbon copy cloner as this will clone your recovery partition as well. Apples disk utility will also clone drives but I'm not sure that it copy's the recovery partition.
I highly redomend my Samsung 840 pro 256Gb - it's about the fastest drive you'll get (nearly) but is backed by Samsung's unrivaled SSD reliability and 5 year warranty. I've also used an 840 basic model on an older macbook and was equally pleased.
Crucial's drives are reliable mac friendly drives but are somewhat slower on the write speeds vs the 840 Pro.
I'd avoid OCZ drives due to so many failures across their range although they do have great reviews and some models just edge the Pro on speed although it's fairly negligible.
As Clinton says, avoid the Samsung Evo drive. I wanted to buy this drive as it is a great drive - but there are many users that have had compatibility issues with it when installed in a Mac. This may rectified on a future firmware update possibly, but until it's proven I would avoid it for now.

Macbook Pro Early 2009 Randomly Sleeps / Black Screen While In use

My macbook pro Early 2009, randomly goes to sleep while I am using the computer, I first noticed it occuring while I was using the mini display adapter to a computer monitor, and using a second monitor and watching a movie, the screen would go blank and I would have to wake it from sleep for it to come back on, sometimes closing the lid, sometimes pressing the trackpad, or keyboard to get it to work again, sometimes it would go back to sleep within 1 minute of waking.
I assume the problem could have been from perhaps water damage, as I recently used a wet paper towel to clean my keyboard, and perhaps the paper towel was a little to moist, not overly but perhaps just enough to damage the sleep sensor. I am still unsure where that is located, the only other problem I have noticed with the computer is my [battery service indicator] notification has been on for the last year, but since I never used the battery, I always have it plugged in at the desk I never bothered getting it serviced. So
I'm assuming its the Sleep Sensor? but here is what I hace done, just to make sure its not software. I was orignaly running 10.8, and after being frustrated while watching a movie and having my computer sleep every 2 minutes, I whipped my hardrive, put 10.9 developers preview on a usb and installed that.
On 10.9 I can swipe with 3 fingers on the trackpad and the display appears but if i let go of the swipe it goes back to black screen.
I can see Icons like, brightness, and sound, when adjusting the levels, but screen is black behind the icons
The mouse pointer cursor is visible but the screen is black
I can move the mouse and hear system sounds, but screen is black. Now I have to actually restart the computer because It seems like I cannot wake it up at all.
So I formatted the hardrive again and
I tried reinstalling Leopard OSX , as that was the disc that came with the mac,
but have Same problems in 10.5, 10.6, 10.7, 10.8 I upgraged to developer 10.9 to see if the problem would fix, but still occurs.
I ran hardware diagnostic off the leopard disc 2, by pressing the D key on startup with disc in drive, extended hardware test reported no problems.
I SMC reset and PRAM reset, [control]+[option]+[shift]+[powerbutton] while computer is turned off with power plugged in
and after that failed I tried pressing [Option]+[Command]+[P]+[R] before startup chime, chime repeat let go of keys and it booted normally.
Then computer randomly sleeps while in use, while using safari and it has happened 3 times within 2 minutes of typing this.
I have downloaded a program called InsomniaX, and activated the disable sleep for Lid and Idle, but now the screen will randomly just go black and then turn back on, sometimes it will just black screen for 10 seconds and come back on, altho after changing some more of the settings It appears to be not as frequent. It hasen't gone to sleep since writing this entire paragraph, so thats a good sign.
I was going to take it into the apple store, and have them run diagnostics, but I hate going into those stores because of all the iphone people, crowding the place.
Well my screen just blacked and came back within 10 seconds on while I typing this line so InsomniaX didn't work. I hope having the sleep sensor replaced isn't too expensive, or if my model even has such a sensor.
I read on another topic that this problem can be replicated by users putting a magnet on their laptop, something like an iphone or a money clip or even having one of these in their pocket while using the macbook on their lap. I have not had anything near the computer, so I have a different problem.
Just thought Id document this, will let you know what happens after the diagnostic, I tried apple support, and they said I did more than they would have done, so he couldn't really tell me anything besides take it into genius bar, (is that what its still called) and have them run diagnostic, [note its different than the hardware test on the cd]
and my computer screen goes black again, wow..

Hi pictureswithPS, welcome to Apple Discussions!
1. I have an original late-2008 unibody MBP that was purchased a week after the introduction. I have never had a single "black screen of death" ever, and I do some gaming under OS X on my machine. The heat issues are, in my humble opinion, greatly exaggerated. Does the machine get warm? Yes. However, any computer with this much power in this thin of an enclosure is going to get warm. Mine has never crashed, frozen, black screened, etc. once.
2. I don't think PS is particularly intensive on the graphics card. It may use the graphics card, yes, but I don't think it will be quite as intensive as a 3D modeling application or 3D games. I would doubt you would ever run into problems anyway.
3. Lastly I am aware that their are tools to manage fan speed behavior - as a workaround to cool down temperatures. Using this software would it void the warranty that is provided by Apple?
No, it wouldn't likely void the warranty. However, if your fans die prematurely as a result of running them at high speeds for extended periods of time, I doubt Apple would be especially happy about replacing them. I do not use any 3rd party tools to manage my fans, and never will. It is simply not necessary.
--Travis

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

Aperture 3.5 and Mavericks on MacBook Pro mid 2009

I feel a bit unsecure whether or not to upgrade to Mavericks as long as there are reports about problems with Aperture on older machines in version 3.5. I currently run Aperture 3.4.5 on my MacBook Pro mid 2009 with 8 GB RAM with OS 10.7.5.
From the discussion I have understood that I have to upgrade to Aperture 3.5 when I upgrade to Mavericks.
Is it safe to upgrade, or is it better to wait.

Frank Caggiano wrote:
Yep as with any new release there are people reporting problems. Some are legitimate some are the normal noise every new release seems to draw out.
And again I will state that for the majority of users 3.5 and Maverick is working fine. To state as you did that this is another low point for Aperture (when were the other low points in your opinion?) is really not much help.
The last low point was Aperture 3.0. It created chaos. You must must have been around then and saw it. Introducing faces and switching it on by default killing performance which combined with the memory leaks then crashed Aperture corrupting the libraries etc.
It needed 3 0.x updates in 2 months to get it functional (and then with work-arounds). Here's the first couple of lines from the updates:
"Aperture 3.0.1 update improves overall stability and addresses a number of issues in Aperture 3, including: upgrading libraries from earlier versions of Aperture, importing libraries from iPhoto, importing photos directly from a camera, memory usage when processing heavily-retouched photos, face recognition processing,"
"Aperture 3.0.2 update improves overall stability and fixes issues in a number of areas. The key areas addressed include: upgrading Aperture 1.x and 2.x libraries, importing libraries from iPhoto or from earlier versions of Aperture"
"Aperture 3.0.3 update improves overall stability and fixes issues in a number of areas. etc"
It wasn't until October that we finally got:
"Aperture 3.1 update greatly improves the overall stability and performance while fixing many major issues"
And since then it's been superb again. Until 3.5.
I don't come here to bad-mouth Aperture, I come to help and learn. The OP expressed concerns about the upgrade based on stability issues reported here. Working with Aperture every day, I concur, I'm encountering the issues daily (because they affect areas I use) and to me it's been a step back closer to the 3.0.x days (but not as bad) rather than a step forward.
But I'm just one person. If others report they are not seeing the issues, that will help the OP get a better balance.
But I believe in calling it how I see it and despite being a huge Apertue fan, the 3.5 issues have dissapointed me. It seemed to be a simple maintenance update, but has only created issues for me, not added or solved anything I need. I only upgraded because it seemed sensible to install the 'Mavericks' version after installing Mavericks. But if I could go back to 3.4.5 I would. I simply think Apple did a poor job here and see no reason to say otherwise.
But I detect from your post that my post may have antagonised you, so let me apologise for that as it was not my intent. I have a lot of respect for you regulars, and all the help you give people.
Regards,
Andy

My optical drive on my macbook pro mid 2009 series is not working all the time.

I have a Macbook Pro mid 2009 series and just recently my optical drive is not working all the time. At times it decides to not spin a disk that has been inserted in the drive. I am currently deployed in Afghanistan and this is one of the very few things i have to distract me from the day to day haul. This is something that just started to happen and its very fustrating since i have limited support for this.

Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type dvd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
===============
Try a different brand. Top forum favorites
CDs
FUJI
TDK
Verbatim
DVDs
Maxell
Verbatim
==============
Apple's Disc Burning Quick Assist
http://support.apple.com/kb/HT2801 Apple Portables: Troubleshooting the slot load optical disc drive
Make sure the DVDs are not dirty, smudged and/or scratched.
http://support.apple.com/kb/TS2000 Mac doesn't start up from install disc
http://support.apple.com/kb/HT2801 Apple Computers: Troubleshooting the slot-loading SuperDrive
*** Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs. ***

Macbook Pro mid 2009 13 inch suddenly freezes and grey screen appears stating press key to restart

Macbook Pro mid 2009 13 inch suddenly freezes and grey screen appears stating press key to restart. Here is my recent crash report. Please help me.
Anonymous UUID:
714EBD8C-083D-E200-A9BD-6F925A8F8F14
Thu May 29 22:30:04 2014
panic(cpu 0 caller 0xffffff80026dbf5e): Kernel trap at 0xffffff80026d1197, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffef8022f973c8, CR3: 0x0000000089778000, CR4: 0x0000000000000660
RAX: 0x000000000000001c, RBX: 0x00000000e00002c2, RCX: 0xffffff8002abb7d4, RDX: 0xffffef8022f973c0
RSP: 0xffffff800d2cb6a0, RBP: 0xffffff800d2cb6a0, RSI: 0x0000000000000001, RDI: 0xffffef8022f973c0
R8: 0x0000000000000001, R9: 0x0000000000000001, R10: 0xffffff8014ea65e8, R11: 0xffffff809b3160f0
R12: 0xffffef8022f973c0, R13: 0x0000000000000001, R14: 0xffffff800d2cb6ec, R15: 0x0000000000000001
RFL: 0x0000000000010202, RIP: 0xffffff80026d1197, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef8022f973c8, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff800d2cb330 : 0xffffff8002622fa9
0xffffff800d2cb3b0 : 0xffffff80026dbf5e
0xffffff800d2cb580 : 0xffffff80026f3456
0xffffff800d2cb5a0 : 0xffffff80026d1197
0xffffff800d2cb6a0 : 0xffffff80026afd0e
0xffffff800d2cb6d0 : 0xffffff8002abb751
0xffffff800d2cb710 : 0xffffff8002abb54f
0xffffff800d2cb760 : 0xffffff7f8413fd2f
0xffffff800d2cb7a0 : 0xffffff7f84188b21
0xffffff800d2cb7e0 : 0xffffff7f841708d2
0xffffff800d2cb850 : 0xffffff7f84170fc8
0xffffff800d2cb890 : 0xffffff7f8413dfea
0xffffff800d2cba10 : 0xffffff7f8416d940
0xffffff800d2cbad0 : 0xffffff7f8413cad9
0xffffff800d2cbb20 : 0xffffff8002acea56
0xffffff800d2cbb40 : 0xffffff8002ad0051
0xffffff800d2cbba0 : 0xffffff8002acdabf
0xffffff800d2cbcf0 : 0xffffff80026b66a8
0xffffff800d2cbe00 : 0xffffff8002626bf1
0xffffff800d2cbe30 : 0xffffff80026139f5
0xffffff800d2cbea0 : 0xffffff800261e043
0xffffff800d2cbf20 : 0xffffff80026c975d
0xffffff800d2cbfb0 : 0xffffff80026f3a28
Kernel Extensions in backtrace:
com.apple.GeForceTesla(8.2.4)[24ED915E-02F3-3A31-8502-6AA41FFCA420]@0xffffff7f84 12b000->0xffffff7f841f5fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f82cbe000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[B93BBFC9-9ED5-3DDD-8CED-5EDA081BB997]@0xff ffff7f8324b000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[B889D3AB-CCC0-3FCD-A83E-D2E3E4CB537B]@0 xffffff7f83208000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[6EB3FF52-A4F6-3496-AE9C-D89B00F DE504]@0xffffff7f8325b000
BSD process name corresponding to current thread: Skype
Mac OS version:
13D65
Kernel version:
Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64
Kernel UUID: ADD73AE6-88B0-32FB-A8BB-4F7C8BE4092E
Kernel slide:
0x0000000002400000
Kernel text base: 0xffffff8002600000
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 60200033152435
last loaded kext at 44797399467641: com.apple.filesystems.smbfs
2.0.2 (addr 0xffffff7f84b15000, size 335872)
last unloaded kext at 15796237223278: com.apple.macos.driver.AppleUSBEthernetHost
7.0 (addr 0xffffff7f84b15000, size 20480)
loaded kexts:
net.telestream.driver.TelestreamAudio
1.1.0
com.rim.driver.BlackBerryUSBDriverInt
0.0.97
com.apple.filesystems.smbfs
2.0.2
com.apple.filesystems.ntfs
3.11
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.driver.AGPM
100.14.15
com.apple.filesystems.autofs
3.0
com.apple.driver.AppleMikeyHIDDriver
124
com.apple.driver.AppleHDA
2.6.1f2
com.apple.driver.AppleMikeyDriver
2.6.1f2
com.apple.GeForceTesla
8.2.4
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.driver.AudioAUUC
1.60
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.iokit.IOBluetoothSerialManager
4.2.4f1
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.driver.AppleHWAccess
1
com.apple.driver.AppleBacklight
170.3.5
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.4f1
com.apple.driver.AppleSMCLMU
2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin
1.0.0
com.apple.driver.AppleLPC
1.7.0
com.apple.driver.SMCMotionSensor
3.0.4d1
com.apple.driver.AppleUSBTCButtons
240.2
com.apple.driver.AppleUSBTCKeyboard
240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.driver.AppleIRController
325.7
com.apple.driver.AppleUSBCardReader
3.4.1
com.apple.iokit.SCSITaskUserClient
3.6.6
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.5.1
com.apple.driver.AirPort.Brcm4331
700.20.22
com.apple.driver.AppleFWOHCI
5.0.2
com.apple.driver.AppleUSBHub
666.4.0
com.apple.driver.AppleAHCIPort
3.0.0
com.apple.nvenet
2.0.21
com.apple.driver.AppleUSBOHCI
656.4.1
com.apple.driver.AppleUSBEHCI
660.4.0
com.apple.driver.AppleSmartBatteryManager
161.0.0
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleSMBIOS
2.1
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.driver.AppleIntelCPUPowerManagementClient
217.92.1
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.driver.AppleIntelCPUPowerManagement
217.92.1
com.apple.AppleGraphicsDeviceControl
3.5.26
com.apple.kext.triggers
1.0
com.apple.driver.DspFuncLib
2.6.1f2
com.apple.vecLib.kext
1.0.0
com.apple.driver.AppleHDAController
2.6.1f2
com.apple.iokit.IOHDAFamily
2.6.1f2
com.apple.nvidia.classic.NVDANV50HalTesla
8.2.4
com.apple.nvidia.classic.NVDAResmanTesla
8.2.4
com.apple.iokit.IOAudioFamily
1.9.7fc2
com.apple.kext.OSvKernDSPLib
1.14
com.apple.iokit.IOSurface
91.1
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.iokit.IOBluetoothFamily
4.2.4f1
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.4f1
com.apple.iokit.IOFireWireIP
2.2.6
com.apple.driver.IOPlatformPluginLegacy
1.0.0
com.apple.driver.AppleSMBusPCI
1.0.12d1
com.apple.driver.IOPlatformPluginFamily
5.7.0d11
com.apple.iokit.IONDRVSupport
2.4.1
com.apple.iokit.IOGraphicsFamily
2.4.1
com.apple.driver.AppleSMC
3.1.8
com.apple.driver.AppleUSBMultitouch
240.9
com.apple.iokit.IOUSBHIDDriver
660.4.0
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice
3.6.6
com.apple.iokit.IOBDStorageFamily
1.7
com.apple.iokit.IODVDStorageFamily
1.7.1
com.apple.iokit.IOCDStorageFamily
1.7.1
com.apple.iokit.IOAHCISerialATAPI
2.6.1
com.apple.iokit.IO80211Family
630.35
com.apple.iokit.IOFireWireFamily
4.5.5
com.apple.iokit.IOUSBUserClient
660.4.2
com.apple.iokit.IOAHCIFamily
2.6.5
com.apple.iokit.IONetworkingFamily
3.2
com.apple.driver.NVSMU
2.2.9
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.11
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOReportFamily
23
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.driver.AppleUSBComposite
656.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.6
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.6
com.apple.iokit.IOUSBFamily
677.4.0
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.9
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.pthread
1
com.apple.kec.corecrypto
1.0
System Profile:
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 6 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x830B, 0x4E54344743363442384842304E532D434720
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK3255GSXF, 250.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-868
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: Wireless Optical Mouse
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 6 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x830B, 0x4E54344743363442384842304E532D434720
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK3255GSXF, 250.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-868
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: Wireless Optical Mouse
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:

riyazfrombangalore,
your 13-inch Mid 2009 MacBook Pro requires 1066 MHz RAM, but you have 1333 MHz RAM installed. Try replacing the 1333 MHz RAM with 1066 MHz RAM — Macs can be picky about the RAM which they find acceptable.

Can I swap the hard drive from MacBook Pro 17 (2009) to MacBook Pro 15 (2006)?

My MacBook Pro 17 (2009) died. Pushing the power button gets no response. I had had problems with it for some time turning it on, it usually taking many many tries. Plus when I'd try to do a restart after updating software, instead of doing so it'd shut off super quick with a *pop* sound. There was never any of the typical hard drive going bad sounds I've read about and seen in videos. Since it has refused to turn on I've gone through every suggestion I can find to get it to turn back on. Unhook the battery and try starting from just the power cord; the shorting the power pads move; some thing undoing the battery, counting to 10, and then the next steps now escape my memory, but doing more counting to 10 inbetween; unplugging the battery and leaving it sit for 2 days with no power cord plugged in either, then hook it to a power cord and turn it back on; and so many more.
Also the symptoms just before this fiasco were as follows: I had a CD in the internal drive and was browsing through the images on it via the handy previewer using the space bar. Then I decided to quite, tried ejecting the CD by dragging the icon to the trash, and nothing. I tried again. The same. Then I pushed on the eject key, with the ejct icon popping up on the screen momentarily, but still nothing. Then it appreared as though some things worked and other things were not working. In my frustration I went to the Apple menu and clicked restart with a wince knowing it was going to take forever to turn back on. It did the usual quickly off with a *pop* and made super short lame attempts to turn back on when using the power button. Of course the CD kept trying to spin for a split second and then the little indicator light on the front would go out, then no noise at all.
Since I do not believe it is the hard drive (of course I could be wrong not being a Mac nerd at all), I was wondering if I can switch the hard drive to my Macbook Pro 15 (2006)?
I tried this, but it would not read the hard drive. Just a blank grey screen. If it is possible to do this swap, what are the exact steps to do? Please answer like I'm completely illiterate on this, because I really am. I'm super scared of losing everything on the dead MacBook's hard drive. Yeah yeah, I know: then why have I not been backing things up? I had the week prior. Believe me I WILL be doing it daily from now on if I get this mess straightened out!
Here are the specs for each MacBook Pro:
Name: MacBook Pro 17 (info gained from the serial on the bottom and then looked up online)
Model: A1297
Model Code: mbp_17_early_09
CPU Type: Intel Core 2 Duo
CPU Speed: 2.8GHz
RAM Type: DDR3 PC8500 SODIMM 1066MHz
RAM Slots: 2
Max RAM by Slot: 2 x 4GB
Maximum RAM: 8GB
RAM Pairing: Modules may be installed individually
Hard Drive Connection: SATA 300
Hard Drive Platter Size: 2.5"
Device Connectivity: USB 2.0, FireWire 800
Video Output (base graphics option): Mini DisplayPort
Expansion Slots: ExpressCard/34
Max Operating System Version: 10.6.8 (I believe that is what was last on the computer)
Name:    MacBook Pro 15" (retrieved from the System Profiler on this Mac)
Model Identifier:    MacBookPro2,2
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.33 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    4 MB
Memory:    3 GB
Bus Speed:    667 MHz
Boot ROM Version:    MBP22.00A5.B07
SMC Version (system):    1.12f5

OGELTHORPE really sorry to keep bugging you, but it's obvious you know what you are talking about and I'm stuck on thin ice here getting this fixed, because there are no authorized Apple reps here. I would rather shoot myself for messing up, then to trust someone who "says" they can fix my Mac down here.
I checked out a company owned by ebay that is the same down here, called MercadoLibre. There are quite a few adapters listed there. I'd like to give you links for some and was wondering if you minded taking a look to tell me if any seem to fit the bill. Some have specs in English, others don't. (Google translater is my friend!)
#1. http://articulo.mercadolibre.com.uy/MLU-415826915-adaptador-usb-a-ide-y-sata-con -cables-y-fuente-envio-gratis-_JM
#2. http://articulo.mercadolibre.com.uy/MLU-416270876-usb-20-to-ide-sata-25-35-hard- drive-_JM#D[S:HOME,L:HISTORY,V:1]
#3. http://articulo.mercadolibre.com.uy/MLU-416384859-adaptador-usb-20-a-sataide-_JM
#4. http://articulo.mercadolibre.com.uy/MLU-415596152-adaptador-usb-20-para-sata-e-i de-manhattan-_JM
#5. http://articulo.mercadolibre.com.uy/MLU-416061182-adaptador-de-usb-a-sata-o-ide- 3525-con-fuente-externa-_JM
#6. http://articulo.mercadolibre.com.uy/MLU-416061069-convertidor-usb-20-a-sata-hdd- 25-soporta-hasta-1tb-_JM
These are all cost effective enough that I don't care the price - cheap, expensive - whichever will work the BEST!
I've also looked for the 7200 rpm HDD, and although I found some, I'll be danged if they are not 3.0, instead of the 2.5 that I have. Grrrr! I was willing to spend the $90 for 1tb... or being the non-techie that I am, can this 3.0 go into my 2006 MBP??
Just so you can see what all is listed right now:
http://listado.mercadolibre.com.uy/7200-rpm-hdd-2.5-macbook-pro
Another newbie question: How do I check what the amount if RAM is presently installed in it? (I might be a greenhorn, but I take pride in not being a dumbie and I learn when taught)
Right now, I'm willing to spend almost anything. I want a few files that are on the HDD at the moment that I was stupid and did not backup on my external. One file I worked on all day due to the dimensions I had to design it at and each effect took a long time to render. I really don't want to do that one again!.. I'm also willing to spend anything that won't cost me the price of a new iMac. Figure that should be the next one I buy that is affordable, but won't be overworked like the MBP was.
Once again, thanks much for all of your help!

HT201364 Macbook pro 15 (2009 released) has recently installed OS X 10.5.8 Leopard

Similar Messages

Maybe you are looking for