HT201364 why i don't install mac os x maverick for macbook pro retina later 2013?

why i don't install mac os x maverick for macbook pro retina later 2013?

Welcome to Apple Support Communities
The Late 2013 MacBook Pro already comes with OS X Mavericks. However, if you try to download OS X Mavericks from the Mac App Store, you will get a message telling you that your MacBook Pro is not compatible, when it is.
This is caused because the Late 2013 MacBook Pro is running a special OS X Mavericks version which is different than the version available in the Mac App Store. This makes that you get an error message when you try to download OS X Mavericks even when you are using it.
Instead of downloading OS X Mavericks from the Mac App Store, you can still download OS X Mavericks to reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718 You will be able to download OS X Mavericks from the Mac App Store when your MacBook Pro uses the same version as all other Macs

Similar Messages

OS X Mavericks 10.9.1 can't be installed on MacBook Pro retina late 2013

OS X Mavericks 10.9.1 can't be installed on MacBook Pro retina late 2013
OS X Mavericks 10.9.1 installer is available in the App Store but it can't be downloaded because "OS X Mavericks can't be installed on this computer".
If the installer of version 10.9 is already in the application folder it can't be updated for the same reason.
I've seen that they are two versions of the updater that are downloadable from apple's website and one is specific for the MacBook Pro retina late 2013.
I suspect that the installer in the App Store is not an universal installer. It is stupid because you can't reinstall that Mac is needed.
I phoned to Apple (AppleCare) and they don't know why this happens.

Hello,
Try to boot the 15" MBPr as target when connected to your MBA (if you have the right cables and adapters).
From the MBA, install on the 15" MBPr's disk, in that order :
The 10.9.1 update for Mavericks except MBPr
Download
and then the 10.9.1 update for Mavericks specific for MBPr
Download
The MBPr should be bootable again. I did it for an external HD.
Hope this helps.
Best,
ÉrIC Miclo

MacBook Pro Retina Late 2013 UI Lag after installing Yosemite

Hey everyone,
Ok so my Issue here, and I think I'm not the only one but my MacBook pro retina late 2013 (8GB ram, 256gb SSD) has been experiencing numerous issues after installing Yosemite. For example, the UI lag is at times horrible; after opening several apps, and especially after having a pdf or two open in preview everything becomes so sluggish. the animation of switching to mission control is painstakingly slow, and opening new tabs in safari takes 2 or 3 seconds. I've done a clean install of yosemite but nothing seems to help, what should I do; just revert back to mavericks and cross my finger for a future update?
Any help would be much appreciated, thanks so much !

i am in the same situation as you, late 2013 retina MacBook Pro 15 inch upgraded to yosemite and then clean installed yosemite b/c of UI lag after opening several apps at once... I found that yosemite drained my battery life too, on mavericks i was getting 5-8 hrs of battery life, on yosemite i was getting like 2-3 hrs most.
After exhausting every option out there (apple store genius bar help, apple repair, etc), I came to the consensus that my macbook had no hardware problems at all, it's basically a software problem on apple's end. and until they update yosemite with a specific fix for the UI lag and the battery consumption problems, i am not going back to yosmemite.
what i did was clean installed back to mavericks... this solved every one of my problems, NO LAG, NO BATTERY ISSUES, back to buttery smooth performance, of course without the new UI however... but i can live without new design
this experience tells me several things: 1. the new apple under the leadership of cook is slowly but surely sacrificing quality of software for unnecessary updates(sales) 2. mac hardware is still good but who knows for how much longer

Installed Yosemite update on MacBook Pro retina late 2013 will not boot flashing folder with ?

I just Installed Yosemite update on MacBook Pro retina late 2013 will not boot flashing folder with ?

dunno, Lynn--maybe Etrecheck. trying running disk utility to verify the status of your hard drive. That may give you a basic idea. Perhaps tech tool pro. As for it running hot, I can't say for sure. try shutting it down and using a vacuum clearner +crevice tool around the back of it. It's been my experience that hard drives usually fail without a lot of warning, luckily you have a backup. Afterwards you can say "Yup, that went bad". I've done a little research and found out that your MacBook Pro doesn't come with a conventional hard drive as such, but an SSD (solid state device) . It's upgradeable (up to 1 TB ) but not cheaply
go here for more info (OWC) :http://eshop.macsales.com. For right now, I'd recommend resetting the SMC/PMU, maybe zapping the pram . to do that, reboot, hold down Apple+Option, P+R keys while rebooting. Hold down for 3 chimes, let go and let it boot. as for the SMC thing....
I'm assuming your battery isn't removeable-shut down computer, plug in MagSafe cable . On built in keyboard, on left side, press Shift-Control-Option and power button at the same time. release all the keys and the power button. press power button again to turn on computer
that is all
John b

I have Windows 8.1 installed on my Macbook Pro Retina (Late 2013) and it keeps on crashing with a WHEA_UNCORRECTABLE_ERROR BSOD error

I have Windows 8.1 installed on my Macbook Pro Retina (Late 2013) and it keeps on crashing with a WHEA_UNCORRECTABLE_ERROR BSOD error. Is this an issue with the bootcamp driver not compatible with Windows 8.1? or is there something I can do to fix this.
I also keep getting WHEA-Logger Event-ID 19 warning events in the Windows Event Logs with the following details.
A corrected hardware error has occurred.
Reported by component: Processor Core
Error Source: Corrected Machine Check
Error Type: Cache Hierarchy Error
Processor APIC ID: 3
The details view of this entry contains further information.

likely win8.1 dont have official bootcamp support yet
1/3 of my logins into win8.1 result in a fatal bluescreen
was the same deal when I installed win8 before official support
and when the drivers with official support was released the issue went away

Having trouble installing Win 8.1 Pro with BootCamp on MacBook Pro Retina late 2013. What's the latest word?

Why is this so difficult? A lot of the directions are outdated by months.

It is not difficult if you read and follow the instructions located here: http://www.apple.com/support/bootcamp/
If you are having specific problems let us know. We can not help you without details.

How to create Install OS X Yosemite for MacBook Pro Retina Early-2015

HELP ME! Unable to Boot from Install OS X Yosemite USB
I just bought a new MacBook Pro Retina 13" Early-2015 and wish to install Windows 8.1. I created Windows Install USB using Boot Camp and Installing Windows. Unfortunately, I erase all SSD by accident.
I created Install OS X Yosemite 10.10.2 USB as guided at https://support.apple.com/en-us/ht201372 using my MacBook Pro Retina Late-2013.
This USB works perfectly on my MacBook Pro Retina Late-2013 but I am unable to boot from Yosemite 10.10.2 Install USB on my new MacBook Pro Retina Early-2015. The white stop sign appeared on black screen all the time. I am stuck here and can't reinstall OS X Yosemite on my new MacBook.
I also can't use Recovery boot as the SSD had been erased.
Please help to show me how to create OS X Install USB that can use with my MacBook Pro Retina 13" Early-2015

Boot the MBP with the OPTION + COMMAND + R keys.
It should result in a display with a revolving globe.
If you follow the directions, it will connect you to the Apple servers and you will be able to install the original OSX that came with your MBP.
You will need a solid Internet connection.
Ciao.

HT201364 is the latest mavericks not for Macbook Pro retina display?

is the latest mavericks not for Macbook Pro retina display? i tried upgrading my latest macbook pro but unable too

i just got a new macbook pro retina display - A1502. When i check about my os it dispalys -
Software OS X 10.9 (13A3028).
So i went to the app store and tried downloading os x mavericks which is free.. then i get this message saying
We could not complete your purchase.
OS X Mavericks cannot be installed on this computer.

Do I need to install Flash Player on my new Macbook Pro Retina

Do I really need to install Adobe Flash Player on my Macbook Pro Retina?

Only if you need to use websites which require it.
(116697)

How to install Mac OS 9 on my MacBook Pro?

I have recently bought a MacBook Pro. It came with the Mac OS X Tiger operating system. However, I need Classis environment for one of the programs that I wish to use so I went on and bought a new Mac OS 9 install CD, which I tried to install onto my machine by booting up from the CD-Rom. When I try and follow the instructions on the CD, i.e. "Hold down the C key as your computer starts up" it does not seem to do anything. The computer boots up in the Mac OS X as if I have no Mac OS 9 install disk inserted in my drive.
If anyone could give me any help as to how I would be able to install the Mac OS 9 on my MacBook Pro I would be more than happy.
Note: I have got my hard drive partitioned into two partitions.
I am looking forward to some suggestions/answers as to where my problem actually is.
Thx.

Hi, gmujkic. OS 9 and Classic are not supported by the Intel processor in your MacBook Pro. None of the Intel Macs, as shipped, runs Classic applications. Nowhere in any of the literature on the Intel Macs will you find any hint of Classic support. It would have been wiser to look into this before buying the MacBook Pro — you might have decided to buy a Powerbook G4 instead.
Third-party hacks/emulators allowing you to run OS 9 apps may be in the works, but Apple will not support them. Use them, if/when they appear, at your own risk, and subject to whatever limitations they may impose on your ability to run the Classic software you like.

Why Apple store can't Upgrade the storage for Macbook Pro Retina after sale?

Hello everyone
I am disappointed from apple store .
One month ago i bought the new MacBook Pro Retina with storage 256 GB and now i would like to upgrade the storage to 768 GB as mentioned in there website where you can configure the storage higher,but unfortunately i went to apple store to upgrade,but they refused and they said we only upgrade within the order in the beggining before you buy it !!!!!!!!
even if i go to normal shop they will do the upgrade but i will lose my waranty .
Is there any advice ?
Thanks
Khalid

No one seems to be hearing what Big Q is saying.
He can pair his iPhone to his Macbook, but cannot CONNECT. He's NOT asking for alternative solutions, like Wi Fi.
I am able to both pair and connect my one one Macbook to my other one, but I can only pair but not connect my iPhone or iPad to either Macbook. So I have the same problem. But I can pair and connect my Macbooks to other Bluetooth devices, like my ancient Nokia cellfone, or my Bluetooth HP printer.
It's irrelavent that I can instead use a direct USB cable or Wi Fi between my Macbooks and my iPhone/iPad - why can't I use Bluetooth? If Apple does not allow Bluetooth between it's Macbooks and other Mac devices, then why have Bluetooth at all? Does my iPhone have Bluetooth only so that I can pair and connect to my my non Apple mobile handsfree car kit, or communicate easily with the dreaded Apple enemy Samsung, or what?
Make no mistake , I am a diehard Apple fan, but this Bluetooth non compatibility issue appears shortsighted and seemingly pointless. Why does Apple not just say why they created the non compatibility, or have a message on the Bluetooth setup programme which simply and clearly says "don't bother wasting hours of your time trying to pair and connect your iPhone to your Macbook, because we don't allow that anymore, reason being that............"?
As a first time user of this Forum I am surprised at the intolerant and highhanded tone of some of the replies to what is a legitimate question, that is obviously plagueing many, many other Apple users.

Problem installing Windows 8 via Bootcamp on MacBook Pro 13 (late 2009).

Hello,
I've installed Windows 8 Pro on my MacBook Pro 13 (Late 2009) which does not support Windows 8. I've started installing Windows 7 via Bootcamp, then interupted the installation and pluged-in the Windows 8 Disk, and after formating the partition, I've installed Windows 8 64-Bit.
Here is the problem. The Windows works fine, BUT after restart when I hold 'Alt' and choose EFI Boot (Windows 8's partition), Windows 8 starts loading but then suddenly there is a white flash and it restarts again. So after shut down or restart I cannot boot it.
Do you think that this is because I do not have Bootcamp installed on the Windows 8?
I've downloaded the supported software for Windows 8, but when I click setup.exe, it is giving me the following error:
This version of Bootcamp is not intended for this computer model. I've been trying to install it for more than 78 hours, so I'll be extremely gratefull to whoever help me. Thank you in advance.
P.S. Mac OS X partition boots fine.

If it is really not possible, I get it. But there are plenty of people that are running Windows 8 on the same model, that is powerfull enough to run Win 8. I'm actually running it, but until shut down or restart . Can't I edit Info.plst file alternative for Windows 8 like I did to allow BootCamp to image burn my USB on my model? I mean my model is same as the next one. I can't see why the drivers for mid 2010, won''t work on mine...

Macbook Pro 15" (late 2013) - Cant get proper 802.11ac WiFi-speed. Mac or router issue?

Hey
Im from Norway and just bought the 2013 Macbook Pro Retina 15 inch. My router is an Asus RT-AC66U, which should be capable of 1.3 Gbps connection speeds. When i connect my mac to this router on a 5 GHz network with N+AC only mode, i only get a link speed of about 200Mbps, often lower aswell. I was under the impression that you should get the theoretical maximum speed of the 802.11x youre using, as link speed. When i go to "about this mac"-"system report"-WiFi" it clearly says that im connected with 802.11ac. Why do i get such a low transmission rate? Its a problem with bootcamp aswell (Windows 8.1), which leads me to belive that the router mighth be the issue?

It seems that i have found a solution to the problem, but at the same time encountered a new one. The router was the problem. I live in an apartment building with many other students, and there are tons of other WiFi signals from other apartments. The router was in N+AC (there doesnt seem to be an AC only mode as of now?), and the signal strenght was around -40dB (Macbook placed three meters from router with no obstacles in the way). I downloaded a program called inSSIDer for Office and scanned all the network and associated channels and it turned out the router hadn't exactly choosen the optimal channel. When I changed the channel to a less populated one (44), the link-speed suddenly jumped from around 200 to a little over 1000 Mbps. I really didnt know just how sensitive to interferrence WiFi truly is.
The strange thing in windows though is that even though the linkspeed is great (i get much lower link-speeds in Windows, 400-600 (seems to be stuck at 802.11n in windows) compared to 800-1300 in OSX) i max out at 30 Mbps download (speedtest.net), while upload speeds remains unaffected at 94 Mbps (100/100 Mbps subscription). And when I turn on automatic channel selection on the router the link speed goes down to about 200 again (because of the interference issue), but the download speeds go up to 94 Mbps. This is not an issue in OSX, so maybe its an Windows Boradcom driver issue or something?

Why do USB drives plugged into USB hubs make my Mac Book Pro (Retina late 2013) wake from sleep?

I have 2 x USB hubs, a Logitech USB 2.0 hub and a Broway USB 3.0 hub. Tested both and both seem to be the cause of my late 2013 Mac Book Pro waking from sleep. I ran syslog to find out why (syslog |grep -i "Wake reason") and the reason I got back was "kernel[0] <Notice>: Wake reason: XHC1" - this means nothing to me, but it didn't take too much mucking about to hunt the problem down and figure out it was the USB hub with any USB drive attached. If the drive is attached directly to the computer. No problem, computer sleeps fine.
This was a problem I encountered (and never solved) with OSX 10.6.8, a 2008 Macbook Pro the same Logitech USB 2.0 hub, but with different drives. I put the problem down to a bug that never got solved in an old system. But I am simply AMAZED after my update to a new MBP and new system that it is still about almost 6 years, a dozen MBP's and 4 systems later.
The other problem is that not only does the USB drive/ USB hub combo wake the computer it also loses the drive upon sleep and mounts it again upon wake. Then repeats this process every couple of minutes. And it obviously doesn't eject the drives properly because each time I return to the computer after I put it to sleep or let it go to sleep I get a giant list of "Disk Not Ejected Properly" notifications about it. Which I'm guessing could eventually cause some file damage.
I've tried combinations of different drives, different hubs (a Belkin and a no-name Chinese brand 2.0 hub) and the problem persists. Is there a solve to this problem? I'm surprised to see so little posts on forums about this. Am I just unlucky and got another combination of faulty/problematic hardware, or is this a real problem that exists for everyone? If not I would love to know if people have found winning combos of USB hubs and drives. But if it is, then it HAS to be solved.
If you have a Macbook Pro, then you are limited to 2 USB outlets, this is obviously a bare minimum and I would say that 95% of people using their laptop computer in the office or at home have a hub, and very likely a USB drive attached to it. I know actual Apple reps don't really pay much attention to the community support posts, but I've got 6 months worth of Applecare left and would like suggestions about how to get Apple's attention about this problem.
BTW Jettison (a 3rd party app that ejects drives properly before sleep) is not a solve. It is a 3rd party app that tries to fill a hole in a broken system. I don't want to eject my drive upon sleep, I want it to got the **** to sleep.

Is there a pattern to the time of day or other detail that may be
traced back to a OS X system cause of this odd phenomenon?
Are there any copies of system files on any of the attached USB
external drives? Any libraries, such as iTunes, iPhoto, etc?
Once the drives are indexed by Spotlight, are their permissions
ignored by the OS X? Content, if neutral, should not affect the
wake or sleep cycle; especially if they're ignored by the OS X.
Could there be a bad cable or other component? If so that would
be a difficult process of elimination to detect it. Usually replacing
most suspect components in the USB stream (external to Macs)
is a rote way to mechanically test that idea; & not 100% sure.
Does the equipment all have a good ground to the utility or house
electrical field? An intermittent ground may affect more than sleep.
Hard to say at this point. Maybe a late-night talk radio guru on
remote viewing could peer into your situation and sleuth it out?
Sorry to have run out of ideas, but the process must be electrical
& mechanical to some extent. - Or perhaps odd software inspired.
Do you have any phone-home spyware items inside, just jumping
at the chance to spill your information? Little Snitch may help.
PS: Perhaps the computer needs to go into Apple & have a genius
or product specialist at AASP test the unit thoroughly... BlueTooth?
see:
https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
Good luck & happy computing!
edited 2x

Cannot install Mac OSX Snow Leopard on Macbook Pro Unibody with a new SSD

Hi, I just bought a SSD (OCZ Vertex LE 120GB) to replace the stock SATA HDD. The problem is that the Mac OSX installation fails. I tried a lot of times with no success. Both clean install from DVD or restoration from a Time Machine backup fails.
The problem doesn't happen if I put the same SSD into a PC to install a Linux or Windows. I've read something saying the problem to be at EFI 1.7, SATA bus and even SATA cable in the Macbook Pro. Can anyone help in this issue?

IgorOzz wrote:
Hi OrangeMarlin, thanks for answering and trying to help me in this issue. Well, The SDD is well formated by Disk Utility and GUID partition as well. I tried to clone my HDD to the SDD by using the Disk Utility RESTORE option. By doing this I could boot up from SDD but somethings didn't work well (iPhone crashed at every start), Finder sometimes, and other apps...
Maybe the disk utility restore option isn't the best way to do that. I'm gonna try the following steps:
- Carbon Copy to clone my HDD to SDD;
- Update SDD FW to the last one (but I need to install it on a Windows machine first);
- Downgrade EFI FW back to 1.6 (not sure if I'll proceed to this step).
I was thinking about SATA bus and cables because I've read some issues pinpointing to this as the culprit, since the Macbook's SATA wouldn't be able to handle 3Gbps SATA II speeds.
Now, a little question: Why you say to be not recommended to install the new drive internally? What if, after using the SSD or HDD for a while and the system crashes I need to reinstall Mac OSX? I think it's supposed to be installed from the scratch by the DVD installer. Isn't it?
Again, thanks... and waiting more replies...
Do one step at a time, and I highly recommend not "downgrading" the EFI. The unintended consequences might make you throw your MBP out the window.
Yes, use Carbon Copy Clone. Then try to boot from the cloned drive. Hold Option at startup, and it will give you a choice.
If it works, then put it in your MBP. If it doesn't boot, then go to step two, repeat clone, and try again.
My 2010 MBP runs at 3Gbps. I think prior to the 2010 models, Apple had not qualified any drives, other than the ones they put in the MBP's, that could work with 3Gbps drives. You may have one that doesn't.

HT201364 why i don't install mac os x maverick for macbook pro retina later 2013?

Similar Messages

Maybe you are looking for