HT201365 my text to send messages is now not working correctly after upgrading
Since upgrading last week my text is not working correctly it is very slow does not show the letter being used and takes seconds to be put in
Looking into the Diagnostics and Usage Reports in 'Settings' -> 'General' -> 'About' I see nine different "ExcResource_MobileMail_DATE" reports. Looking at the report I see a SysInfoCrashReport that indicates that the CPU was pegged at over 50% (mostly over 75%) for over 180 seconds using the MobileMail app.
I also see a "MobileMail_DATE" report that indicates that there was an 'Exception raised during monitored invocation of _loadMoreMessagesWithMaxVisibleIndexPath:maximumIndexPathsBySource:, exception: ** -[__NSArrayM objectAtIndex:]: index 4294967295 beyond bounds for empty array"
And finally I see three "stacks+MobileMail-DATE" reports with "Power assertion timeout for 'com.apple.message.fetchMobileSynchronously...' Simply resetting it now." and "Power assertion timeout for 'com.apple.mobilemail.messagebodyloader' Simply resetting it now" reports.
I updated to iOS 7.0.4 and decided to try and delete the account in my Mail settings and recreate it and set it to manual instead of the non-working fetch. Now, when I try to check my mail it still takes up to five minutes to respond, pulling the screen to refresh brings up the spinner for about one second and then disappears and no indications of activity occur until about three minutes later when I see the spinner in the status bar near the clock and then see a notification that it's downloading X of Y messages. At that point, message headers come in very quick and then about a minute later message previews come in. At random times, opening the mail app I get a "Password incorrect" error, even though the password works on other attempts.
Similar Messages
-
When I opened Gmail in my Firefox browser, I got a message I've never seen, before: "You are using an old version of Firefox which Gmail no longer supports. Some features may not work correctly. Upgrade to new version." I clicked on upgrade to a new version and was taken to the Mozilla site, where I downloaded the latest version of Firefox... then, when I restarted my computer, Gmail still gives me the same message!! What's going on?
Firefox 4 and later require at least OS X 10.5 and a Mac with an Intel processor.
*http://www.mozilla.org/firefox/12.0/system-requirements/
For an unofficial Firefox ESR 10.0.4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
*http://www.floodgap.com/software/tenfourfox/
*http://www.macupdate.com/app/mac/37761/tenfourfox
Be aware that TenFourFox doesn't support plugins.
*http://code.google.com/p/tenfourfox/wiki/ReleaseNotes1004
*http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
*http://code.google.com/p/tenfourfox/wiki/AAATheFAQ -
I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is button click event message box or popup window will not working correctly. Please any one suggest me the steps to overcome this not responding or slowness in the responding problem of Button click event.
Hello,
In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox, the option to disable JavaScript was removed from the Firefox Options window.
However, the option to disable JavaScript was not removed from Firefox entirely. You can still access it from about:config or by installing an add-on.
'''about:config'''
# In the address bar, type "about:config" (with no quotes), and press Enter.
# Click "I'll be careful, I promise"
# In the search bar, search for "javascript.enabled" (with no quotes).
# Right click the result named "javascript.enabled" and click "Toggle". JavaScript is now disabled.
To Re-enable JavaScript, repeat these steps.
'''Add-ons'''
You can alternatively install an add-on that lets you disable JavaScript, such as
*[https://addons.mozilla.org/firefox/addon/noscript/ No-Script] (to disable JavaScript on a per page basis, as required)
*[https://addons.mozilla.org/firefox/addon/quickjava/ QuickJava] (to easily disable and enable JavaScript, automatic loading of images, and other content)
Thank you and I hope this helps! -
Getting the error message while logging through work place after upgrade
Hi,
C:\Documents and setting\YP80002\Local Settings\Temporary Internet files\Content.IE5\GTKFGH6L\tx[2].sap
Application not found
Getting the error message while logging through work place.
It is urgent
Thanks,
Sri.After upgrading the Batch file it worked fine.
Thanks,
Sri. -
Tried to send too large a message - mail now not working
Hi,
We have a problem. We tried to send a message containing a number of high res. pictures from our .mac account. Clearly this was far too big to send. The message has not appeared in the sent box but is not shown in an outbox. We now keep getting an error message:
"Mail has undone actions on some messages so that you can redo the actions while online. Mail has saved other messages in mailbox “Drafts (Mac Account)” in “On My Mac” so that you can complete the actions while online.
Additional information: The connection to the server “mail.mac.com” on port 993 timed out."
Every time we get this message a copy of the email we tried to send appears in a drafts folder in 'on my mac'
We are not receiving emails onto the computer now although I have checked on my mobile me account and they are coming through fine to that - they are just not being downloaded to our computer.
How do I stop mail trying to send this email and where can i find it to do it. I considered deleting the account and re setting it up but we have loads of emails in our inbox and sent box that we don't want to lose.
Can anyone help?
Thank youGreetings,
Don't even think about deleting accounts; it won't solve the problem and it will create a bigger problem for you.
If the mail is in your Drafts folder as the error message said, first you should look in Home/Library/Mail/<the name of your mobileme account>/Drafts.mbox/Messages and delete the message from there if you see it. Also check your online MobileMe account to see if there's a copy there and delete it, too.
Then try restarting Mail to see if your mail will start downloading to your Mac again. -
Message Indicator Light not coming on after Upgrade to CUCM 7.1.(2)a
getting the voice mail message but light isn't turning red.
Hi there,
Have you looked at the steps in this guide?
Troubleshooting Guide for Cisco Unity Connection Release 7.x
Message Waiting Indicators (MWIs)
http://www.cisco.biz/en/US/docs/voice_ip_comm/connection/7x/troubleshooting/guide/7xcuctsg050.html
Cheers!
Rob
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com/docs/DOC-8727 -
Intermediate Message Event does not work correctly
Hello everyone
I did a test about intermediate message event, i want to realized a business scenario
1) start event
2)parallel split
branch A........ Intermediate Message Event
branch B.........Human Activity Task
3) end event
In this case above, when process is start, a human activity would be created in
UWL view, at same time, this intermediate event is waiting for external WebService Call.
I triggered this webservice(for intermediate event), but this process is not terminated,
and human activity still in UWL view.
Could you please tell me why?Hello John Wu, as you mentioned, i have solved my issue in your directions...
have you ticked the checkbox "Terminating" for the end event?
add a notification
task after the intermediate event to check whether the
intermediate event is working or not -
I used to be able to send text messages to my email. It's now not working. It keeps coming in as a text. Is one of my settings off? Please help?
Verizon is not doing that it is the mail that is doing that.
Check your device settings for email and read the owners manual as to how to set up mail to download. How you want it, leave on server, etc.
Good Luck -
Have an iphone3GS, all ok but now cant send messages and screen not as sentative as it should be?
Bought an iphone 3gs. everthing was ok now cant send messages and screen not as sentative as it should be. HELP!!!!!!!!! please.
Hello masum007,
Thank you for the quick reply!
Based on the information provided in your post, I recommend performing a backup and recovery of your notebook's system. This can be done by following this document on Back Up Your Files (Windows 7), as well as Performing an HP System Recovery (Windows 7). This should help restore your system back to factory defaults.
If the issue persists, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Email was working fine. Now not working even though nothing changed. Deleted acct turned off iPad turned on and added account again. Can receive mail but not send. Sometimes says relay not allowed sometimes different message.
Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if you can then send emails
-
My iPad Air was getting messages. I was able to send messages. Now my message thread is almost gone but I can't send or receive messages anymore
Kamboss wrote:
... Now my message thread is almost gone ...
What exactly does that mean? -
i have an phone 4s from cricket and when i text non iphone users such as android or and other phone brand they receive my text message but when they reply i wont get there message. send imessages is working its just my text message that is not working.
You use Restore to get the latest firmware build, not the Update button. You can only use the Update button, if there is an iOS update, say iOS 5.1.
this link talks about updating to 9A406 to fix the "No Service" issue with iPhone 4S:
http://iphone-and-i.blogspot.com/2011/12/fixing-iphone-4s-signal-problem.html -
Text messages ringtones are not working in the Storm Two
Device: Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc. On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One. On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
VernonHi Jain....
Field separator is for separating the fields.That means it will effect every field in the node.
But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
according to ur scenario if u use data.endseparator 'nl',output will come like this
2008/0701$101
2008/0701$102
2008/0701$103
2008/0702$105
if u want new line for every field try to insert a separate node for second field.That means
MT_DATATYPE:
Data -
1:UnBounded
. .OrderDate----
1:1
<Data2> 1:1
. ....OrderNo -
1:1
now give data.endseparator 'nl'
data2.endseparator 'nl'
if possible try like this....
Sreedhar Goud L -
I sent an email from my iPhone 3GS (via iCloud account) with around 16GB of attachment. It slowed down the phone for a few seconds, then appeared to be sent. However, the message is now not in the sent box, and I can't see an outbox at all. Any ideas?
That changes things a little bit , login to icloud.com and see if you can find it in your sent folder.
If it is there you did send, just need to wait until you phone syncs "sent folder" perhaps on wifi.
If it is not, then I would say it is lost and you may have to send again. They have 20 megs limit, so make sure that message plus attachment is under that limit. -
My text messaging app is not working PLEASE HELP!!!
My text messaging app is not working at all is a blank screen when I open it! Help!!!
No its a well known bug with iphones caused by their over complication of things and their complacency that their users will buy the phones on looks alone irrespective of its basic functionality.
Suggestion 1 - The most common suggested solution seems to be: iMessage needs switched off on all your devices and switched back on after a rest. I found that this did NOT work.
Suggestion 2 - Having a Wi Fi Signal seems to confuse iMessage to send an SMS as a text or as an iMessage. Turn off WiFi on your phone and manually send as text message. Slow, I lnow!!
Suggestion 3 - Move away from any wifi source ie out of range.
Suggestion 4 - Send an email, or a letter. Its more personal!!
20 Minutes later - still not sent 2 short texts.
Apple are very complacent and disdainful of their user community. Not what Id expect but this is a global corporation with the same business ethics as an Oil company or a car company. Profit not function.
Maybe you are looking for
-
How do I turn off certain conversations in Messages in Mac?
After using Messages on my Mac to send a group message to two of my friends, I continue to get the notifications on both my iPhone and my Mac every time I use the same group message. How can I make my Mac stop receiving these messages, so I'm will st
-
Web.Show_document to open .csv file in Excel How??
We have a utility built in our menu (mmb) It reads the screen output and creates a .CSV file on the server using text_io and then using Web.show_document displays the file on the client. The file opens in MS-EXCEL. It gives a standard Excel prompt fo
-
Which table store 'course location'?(lso_pv1b)
when use lso_pv1b/pv1b,We can see course location(number) I want to see more details about the location number,which table? maybe HRP....
-
How to delete WAD and query objects in sap bi
hi, we need to delete the WAD and query from the BW development server and transport the same to the quality and production. please provide the task we need to perform to delete the particular WAD and related queries in the sap bi.
-
Music coming out of Nano speaker?
Is it supposed to be coming OUT of the Nano itself? Just purchased a 5th generation version and the music is coming out of the Nano and I can't figure out why or how to stop it. Help!