HT201398 Innhave a connectivity issue between my iPad now using iOS8.3 and my Dual 150 external GPS.There was no issue before I updated to iOS8.3
Updating to iOS 8.3 has caused a connectivity issue between my iPad and my Dual150 external GPS. Can I revert to a previous version of iOS?
The only way to get this working again is to downgrade to 8.2
Seems Apple does not have this on a high priority list and am not willing to buy something that works for a lot of money. The flying community who uses this for navigation is having a lot of problems with this issue. The position awareness is compromised. Hope they fix this quickly
Similar Messages
-
Difference between copying cube content using datamarts and direct copying
Hi Experts,
I have been going through the SDN for the last 6 months and this is my first post
I know two methods of copying the cube content from one cube to another.
One is data mart method in which we create a datasource based on the cube and
then create a transformation between the new cube and datasource.
This method is used if our source cube is in same server or in diff server.
Other method is directly copying the cube content from source to destination
by creating a transformation between two cubes .
this is used if source cube anddestc u be are in same server.
My doubt is if both the cubes are in same server then what is diff between first method
and second method,
Please clarify meHi,
Now Iam closing this thread with a conclusion .
The question is what is the difference between copying cube
content using datamarts and direct copying
Also what are there any other methods to copy cube contents
from one cube to another.
The diff bet using data marts and direct copying is
In case of datamarts,ven if the source cube is changed in futute there is no effect on the target cube.
In case of copying directly,whenever the source cube is changed,the transformation becomes inactive.
so we have to activate the transformation again.
ALso there are some other methods to copy cube contents fron one to other .
But datamarts is sap standard one.
Thankyo every one for giving answers
Regards,
Sundar -
Hello, I have a problem when I connect to the computer ipad 2 in itunes and click on the "Programs", itunes crashes and writes simply an error. when connecting the iphone does not. everywhere is version 7.0. Itunes is also the latest version. thank you
There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?
This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.
-
Hello!
Can anyone teach me how to connect iphone 4S to ipad retina using bluetooth. I tried, but the devices won't discover each other at all. I just wanted to connect to share contact details so I don't have to key in one by one.
Many thanks
InjinYou need to go to the App stores and find compatible apps. iOS device do not natively have to ability to transfer info to a computer via BT to a computer.
With iOS 8 you can use AirDrop -
can I connect my iphone to my dad's imac and download my pictures to his machine without any issues?
AnaMusic wrote:
By Design you can only Sync the phone to One iTunes Library at a time...
Syncing & importing pics/videos in the camera roll are two entirely different things & have nothing to do with each other.
You can import iPhone camera roll photos/videos using any computer you want...this has nothing to do with iTunes or syncing. -
There was an issue connecting to the server. please try again later. 124.
I'm trying to publish a site withdreamweaver as one of the 5 sites I get with my CC account using business catalyst, but I get the following error message "There was an issue connecting to the server. Please try again later. 124." whenever i try and connect which doesnt really help.
I'm logged in with the correct account in dreamweaver, and i have no issues publishing sites from muse using my CC account.Hi Pirmin87,
There was a known brief outage a few days ago that could have resulted in this.
- http://status.businesscatalyst.com/
However at the moment everything should be connecting fine. If still an on-going issue please reach BC direct chat support for further investigation.
- http://helpx.adobe.com/contact.html?product=business-catalyst
Kind regards,
-Sidney -
How to connect iphone 5 with ipad 2 using Bluetooth? When I activate Bluetooth both devices search but not listing each other to pair or connect.
You can use Photo Transfer App to transfer photos from iPhone to iPad or vice versa using Bluetooth or WiFi
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3dd129795daebebc4b8 741b057f5f70d.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/3af5c541040e15e3f6b 3356e4c55cbfc.jpg -
Hello, for some reason i'Ve lost the ability to access my ipad, although i know the password, the ipad now is deactivated and telling me to connect to iTunes, i've done so but itunes can not access it anyway.
Please tell me what should be done to retrieve my photos on ipad before reformatting it.Unless you've done anything to change it, Google keeps every email that ever passes through their server in your All Mail folder/mailbox/label. Even if you delete stuff, they hold onto it, there. You have to go out of your way to actually delete anything permanently.
-
am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad. an unknown error occurs (1631). what do I do??
The search bar can be very valuable...........
In using it, I found out other's have had this issue and it likely means you have a 3G iPad? If you do, go into settings and turn off cellular data, then try to update again and you should be OK........ -
I have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?
Update your iOS.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!
Hi,
Please download the updates directly from the link below:
WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
Regards,
Sheena -
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
I am trying to sync my ipad to my pc and this message keeps coming up, "itunes was unable to load data class information from sync services. Reconnect or try again later." I have done both. Please help. Thank you.
Look here for help
iTunes for Windows: "Unable to load data class ..... -
I have a "company provided Ipad" now using IOS 6.1.3. the company Will allow me to upgrade to IOS 7 but not to IOS 8. Is that possible?
No, since the iPad 2 is iOS 8 compatible it can only be updated to iOS 8. Apple does not support upgrading to interim iOS versions, and removes those files from the servers when a new version is released. The only path for that iPad 2 is iOS 8.0.2.
Maybe you are looking for
-
PA: Revenue Generation Auto Accounting Error
Hello all, I ran PRC: Generate Draft Revenue for a Single Project report, I got AutoAccounting Error under Draft Revenue Generation Exception Report I know this is because of Accounting Rules, but i don't know which Auto-Accounting Function Rules tha
-
Excise capture for capital goods
Hi, Recently we have purchase capital goods for our organization it is a machine with higher cost, in J1ID We have maintain chapter ID for that capital goods with material and chapter ID combination, also in J1ID tax % BED, ECES SECESS is mainta
-
Create two outbond edi 850(simultaniesly) for a single Purchase Order ,
hi, I have to Create two outbond edi 850(simultaniesly) for a single Purchase Order , How to go, Thanks in advance.
-
Old version of SAP Business Connector (4.6)
Hi, where can I download old versions of SAP Business Connector? in BC section ([http://service.sap.com/sbc-download|http://service.sap.com/sbc-download]) there are only 4.7 and 4.8 installation package and upload. thanks Damiano
-
Hi All, I have a xml document with tag names <Section1>, <Section2>, <Section3>, <Section4>. I have to process these xml elements by indesign script. I am using glue code.jsx for finding the xml elements. this is xpath expression I am trying... this.