HT201398 IPOD 5th gereration is not responding.  Ipod Touch screen wont work.

Ipod 5th generations is not responding.

Try:                                               
- iOS: Not responding or does not turn on           
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable                                                       
- Try on another computer                                                       
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar                                     

Similar Messages

  • My iPod touch screen wont turn on.

    the other day when i woke up my iPod touch screen was off so i tried to turn it on but i would not come on.then i tried to charge it,it will hook up to the computer but the screen still wont turn on. what should i do??

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My iPod touch screen stopped working, how do i fix it?

    My iPod(4th generation) touch screen stopped working. Okay so it was fine earlier, my home button does not work so i have been using the assistive button for months, and until earlier today it got stuck, i tried to power it off but it doesn't let me slide to power it off, and it doesn't let me press anything on the assistive menu either, and i'm currently waiting for my ipod to die but it's taking forever since it's battery lasts forever! is there any other solutions you can give me?
    and i was wondering if my ipod has life insurance with apple so if something is wrong with the screen, can i take it for a new one? (my ipod is in very good conditions, not cracked or scratched, just the home button is an issue)
    thanks!

    Try restoring via iTunes. If necessary. try placing the iPod in recovery mode using one of these programs and then restore:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC           
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • Ipod Touch Screen wont time out?

    So about two days ago I noticed that my ipod's screen wont time out and turn off, if I for example decide to manually change a song rather then skip it from my headphones, it stays on, so i have to manually turn of the screen while I'm playing music..I don't know why I haven't changed any settings or droped it nor has any water gone in it. Is this normal? I mean its not too much of a problem but since I do use it most of the day at work it makes my battery run out much faster. Any help is much appreciated.

    It might be one of two things.
    I know you said you didn't change any thing but,
    Check under settings, general, and autolock it might be on 'Never' change that
    Or i might be misunderstanding.
    You might be use a stereo base and i don't know but if you are, the ipod, if on the 'Now Playing' page is up, will not go to sleep automatically

  • Windows 8.1 hyperlinks not responding to touch screen

    I was running with the beta version 3 34. Running on surface pro 2 windows 8.1. Hyperlinks on pages do not respond to touch, however I am able to scroll up and down and do other things. Under mouse control the hyperlinks are slow to respond. I just uninstalled the beta and downloaded the current version of the site. Having the same problem. Explorer works find, both the app and the full version. Firefox was working fine until an update yesterday. Suggestions please.

    Hello, try '''disabling graphics hardware acceleration'''.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    Open Firefox ''Options'' window as follows:
    * Click the menu button [[Image:New Fx Menu]] and select ''Options''
    * In the Firefox Options window, click the ''Advanced'' tab, then select ''General''.
    * In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    * Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

  • Handheld Zire 71 not responded to touch screen

    Suddenly my handheld will not respond to touches made with stylus. It responds when I click buttons and I can Hot Sync but I can do no operations which reguire using stylus.
    Help
    Post relates to: Zire 71

    The Zire 71 sometimes suffers ribbon cable problems as it ages.  This cable connects the screen to the motherboard, and gets stressed each time you slide the halves apart to use the camera.
    If you've tried all the normal methods to fix screen problems - clearing out any dirt/grit that may be caught between the frame edge and screen with a slice of a business card, running the Digitiser calibration from the Prefs menu, and tried all the Resets (Soft, Warm, and Hard) then this may be the problem and requires repair.
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • My ipods touch screen doesnt work anymore i cant unlock my ipod

    my ipod was working fine for a while and then now all of a sudden the touch screen doesnt work at all. Ive restored it twice now and i cant unlock my ipod because the screen doesnt work..anything i can do to fix it or do i have to buy a new one?

    If you restored to factory defaults/new iPod and still have the problem you very likely have a hardwre problem and an appointment at the Genius Bar of an Apple store is in order.

  • I can not get the touch screen to work

    How do I get he touch screen to work?

    You can try resetting the device by holding down the sleep and home key, past when you see the power down slider and until you see the silver apple. Let it reboot and see if that helps.
    If not you can try a complete restore with iTunes....or it's time to head to the apple store and have them look at it.

  • Ipod touch Screen wont respond

    I just got my ipod touch 2g a couple weeks ago and all of a sudden the ipod froze. So i restarted it and still the ipods frozen i then tryed it again but nothing happened, i then plugged it in my comp but it didnt recognize it as my ipod and said it had to restore, so i did. After it was all said or done it still didnt work. The ipod still works but the touch screen doesnt respond to anything, i cant even unlock it. The volume buttons still work and home and wake still do but the touch screen doesnt. Please can anybody help me?

    the nearest apple store is 3 1/2 hours away from my house
    The repair process can be done by mail. Start with: http://www.apple.com/support/serviceassistant/overview.html

  • I am unable to unlock my ipod cause the touch screen wont work

                My screen is not picking up my touch its frozen I cant even turn it off.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ipod touch apps wont work

    hello,
    my ipod touch wont let me put on apps. when i try to sync them from itunes it acts like the apps are not compatible with the ipod even tho i have had the apps on the ipod before... PLEASE HELP!!

    You will need to make sure first of all that the iPod Touch is logged into the same AppleID that purchased the Apps. You can verify this by going to Settings -> Store -> Sign In (and then sign in to the same AppleID).

  • My ipod nano isnt working after charging after the battery low message came on. What do i do the touch screen wont work. is there a warrenty if I bought it in Dec of this year?

    Please help me. After charging my ipod nano the touch screen does not work.
    what should I do ?

    You have posted in the ipod touch forum.
    Perhaps you should post in the ipod Nano forum.
    The ipod has a one year warranty.
    Have you tried basics form the manual?
    Restart.  Rest.  Restore.

  • Ipod touch 2G wont work with wall charger

    my ipod touch will charge fine when plugged into my computer, but when plugged into a 2005 USB wall charger that i just bought unopened, the little battery icon in the top right flicks from charging to fully charged and back and forth when i know it is nowhere near fully charged.
    I am also using an old usb cable that came with my ipod video 5G, but the touch works fine with that cable in the computer.
    How do i fix this?

    With the release of the 2nd Gen iPod Touch, Apple changed their charging system within the iPod and iPhone lines, rendering older chargers useless for the new devices. That it even claims to charge in any fashion is strange. It is possible the charger is simply defective or unable to provide the necessary power for the iPod Touch.
    Technical side: If your charger is using the Firewire charging pins, it will no longer work on the newer devices. Look for 5v at 1 amp output.

  • IPOD TOUCH SCREEN WONT SLIDE UP OR DOWN AND I HAVE TO DOUBLE CLICK ON IT TO GET TO SOMETHING. NEED HELP!!

    IPOD WONT WORK UNLESS YOU DOUBLE CLICK THE APP. WHEN YOU DO IT WON'T LET ME SLIDE UP OR DOWN.
    < Edited By Host >

    Try the standard fixes:
    - Reset. Nothing will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • I restored my iPod, but now the touch screen wont work!

    please help ! i finally got it restored, and of course, the touch screen does'nt work !

    It sounds like your screen digitizer could be bad.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

Maybe you are looking for

  • How do you clear an SSL State in a Firefox version 20 web browser?

    When browsing PKI-enabled websites, the session will timeout so ofter. To re-enable your session in Internet Explorer your Clear SSL state by going to Tools>Internet Options>Content(tab)>Clear SSL State. When this option is used, I use my Common Acce

  • Variable refreshing in package header

    Hello Experts, Through a function in my package header I fill up a global variable. The function gets the value out of a table in my database: PV_FILENAME PARAMETERS.VALUE%TYPE DL$PARAMETERS.VALUE_BY_NAME('FILE_NAME'); This works fine, however when I

  • Why JNDI is called an Interface?

    Why JNDI is called as Java Naming and Directory Interface, question is why interface ? when it is not a interface ?

  • How do i colorize a black and white photo?

    I have an old black and white photo of a family member I would like to colorize. how is this done? ? I am new to photoshop.

  • Weighting factor for Vendor evaluation

    Hi gurus we have configured evaluation like Quality-50%, Delivery-25%, quantity-25% for all vendors it is picking the same criteria but donno for one vendor calculation criteria is picking  like Quality-66.7% and Delivery-33.3% and Quantity-0% What w