HT201401 can't remember password to unlock phone

how do I restore a locked iphone 4 in itunes

you connect it and mark it under devices in itunes running on the computer
then you choose restore

Similar Messages

  • I can't remember password for my phone

    I have created a password for my firefox os but I forgot it. How can I restore the password to get my phone working again.
    Thank you
    J

    What phone do you have? It may be recoverable if it runs Firefox OS 2.0.
    Otherwise, I'm afraid that resetting your phone is the only option. You should not lose data stored on your SIM card or microSD card if you do that, though.

  • Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in?

    Air MD792E/A, iPAD WIFI CELL 32G Space Grey 
    Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in?       Tried to sync with itunes but iTunes can't sync without a password.  I cannot see summary on the side bar.  How do I restore so I can restart my  iPAD Air since it has relatively no history. I have not had the chance to use it yet.  Finished set up to as far as the start menu.
    <Personal Information Edited by Host>

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • In settings restrictions is on but can't remember password to turn it off

    In settings, restrictions is on but can't remember password to turn it off

    Restore to last backup or factory settings

  • When starting up macbookpro a flashing folder appears with ? in middle i can't remember password

    can't remember password help

    A flashing question mark or globe appears when you start your Mac
    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    b. Boot drive's directory has been corrupted - Repair with Disk Utility.
    c. Critical system files are damaged or deleted - Reinstall OS X.
    d. The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Have new 10.1 in. Slate,can't remember password.

    I  have a Slate 10.1 that I just started to use...again. I can not remember password. I turn it on, screen comes up, with Google circle and keyboard....and then I am lost.
    Thank you in advance
    This question was solved.
    View Solution.

    Here's a link to performing a Factory Reset on your device:
    http://support.hp.com/us-en/product/HP-10-Tablet/5447816/model/7531173/document/c04052020/
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Since I upgraded memory, I can't retrieve/send Mail.  Also can't remember password.  I'm a mess!  Help!!

    Since I upgraded memory, I can't retrieve/send Mail.  Also can't remember password.  Need HELP!!

    Upgrading to firefox 5 and updating my plug-ins helped a bit. Frog is less 'sticky' now, but it's not solved the problem. Java needs to be up to speed or the frog goes into stasis....

  • How do I delete my iCloud can't remember password

    HHow do I delete my icloud because I can't remember password and won't let me reset it for some reason

    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset.
    This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18

  • HT1212 dont remember my password to unlock phone

    dont remember my password to unlock phone

    Use the "Restore iPhone" button in iTunes on the last computer the phone was synced to. This will remove the passcode and restore your most recent backup. As described in the tip you were reading when you posted your message.

  • Phone is locked because I can't remember password

    I cannot turn my i-phone on because I can't remember my password.  Went to the ATT store and they said to connect to Itunes. 

       
    If you can't remember the restrictions passcode, the ONLY way to remove it is to restore your phone as a "new" device in iTunes. That will erase all data on the phone, including the restrictions passcode. If you try to restore from backup, you'll merely continue to restore it, as the restrictions passcode is included in the iPhone backup.

  • HT1766 my phone locked up to the use of emergency calls how can I reset it so I can use mu password to unlock it?

    My phone locked up to the use of emergency phone numbers only...how can I get it unloacked where I can use my passcode to unlock?

    http://support.apple.com/kb/ht1212

  • Can't remember password for password protected document

    I can't remember the password I generated for a pages document.  Is there anyway to unlock document with administrative password?  PLEASE HELP!

    There exist software that will allow you to unlock it. I know word has some free software that does that you can find online. I am not sure about pages. In the future, make sure you write every password you ever use to anything in a document. If you aren't comfortable with this document being on your computer, save it to a thumb drive or SD card. Store this card somewhere safe where no one will ever touch it.

  • HT1414 RESTORING BACKUP,KEEP ASKING FOR PASSWORD TO UNLOCK PHONE

    Problem restoring backup, keep promting 'asking for password to unlock' but initially I did not set any password for backup.
    Is there any methods/ways to restore my backup?

    Nope.
    If you can't remember the password you are stuck.

  • How do I delete an @me acct on my ipad2? Can't remember password OR security question answer for current apple acct so It won't let me edit either!

    I am trying to dele an old @me acct on iPad 2 in the settings page. Help!
    Won't let me delete it and I have a new Apple ID but can't remember the answer to one of the security questions. Is there no way to reset that or recover the answer!?
    This should not be this difficult! I'm trying to swallow the apple kool aide but it is choking  me!!

    This is for your protection, its not supposed to be easy.
    You should be keeping a record of all your passwords, security answers, etc.
    Rescue email address and how to reset Apple id sec. questions.
    http://support.apple.com/kb/HT5312?viewlocale=en_US&locale=en_US
    If that doesn't work and you can verify the following info, call 1-800-APL-CARE.
    1. apple id username, that is not locked or disabled.
    2. serial number of an apple product registerd in your name
    3. Billing info associated with your account

  • When updating to IOS5 restore did not complete and now it is asking for a password to carry on restoring back up and I can't remember password! Would appreciate any help?

    Whilst updating to IOS5 on my iphone 4 it was interrupted whilst restoring the contents of my iphone!!!  Now when I try and restore it asks for a password to unlock my iphone backups - I have tried several but it states password is incorrect and accordingly I cannot restore backups and have lost loads of important information!!
    I would really appreciate your suggestions on what to do.
    Many thanks

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. Some glitch occured and you have to restore/erse the iPod. Y will have to restore from an existing backup if y ohave one.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

Maybe you are looking for

  • Can I have two itunes libraries on the same computer?

    Please see subject line, we now have two ipods in the house but only one computer, and one of the ipods is alot smaller than the other. I f you can help it would be good Thanks

  • Acrobat SDK and MFC

    Hi, sorry for this noob questions, I have just graduated, and have no experience with MFC or the Acrobat sdk. I have tried for some while to get a dialogbox opened and have followed the plugin apps developer guide and this guide http://www.adobeforum

  • Page Zero

    I am trying to display some header text on every page. So I did it on page zero in the page header after I created page zero. Unfortunately it does not display it on every page, just on page zero. Would anybody know why. Thanks Aron

  • Error Ora-12500 when using dblink

    Hi all, I have a database that I can connect directly with no problem, but there's error when I try to connect to that db from another db by using dblink (Select * from someTab@link_name) The error is Ora-12500 (Sure that tnsname.ora file is OK, I me

  • Customize queries in toplink

    Hi, I am new to oracle Toplink. I have created objects for few tables in my project. Instead of standard findall, merge queries, I need to write my own query. Could somebody help me to do this please?