HT201401 CHARGING IS NOT COMPATIBLE WITH THIS ACSESSORY

i updated my ipad 1 as it was not charging. after i updated it all i plugged it into the charger and now it comes up charging is not compatible with this accsessory please help

people repport dirt in the connector can give that msg

Similar Messages

"charging not compatible with this device" after IOS 4.3 update.

I have a belkin car adaptor that I have been using for some time, after installing IOS 4.3 I've been getting the error message saying it isn't compatible and so it refuses to charge my phone, this is important as I use it to charge my iPhone as I use it as a GPS device, i dont see how this problem has come about as prior to IOS 4.3 it charged perfectly!
Could I have some advice on this and fingers cross that apple reads and acts upon this forum!

I've also had this issue with charging since upgrading to iOS 4.3.1 Actually upgrading to 4.3.2 and then to 4.3.3 has not solved the charging problem. Here's my story:
I own an iPhone 3GS and started noticing error messages with 4.3.1 such as "charging is not supported with this accessory". I've tried differnent USB cables and chargers (Apple and non-Apple), hooking up to computers and wall outlets. I get the same message. As a last resort I restored my device as a new phone (syncing works oddly) and erasing everything. This did not help the situation.
So yesterday I took my 3GS to the Apple Store and they were kind enough to replace my iPhone with a new (refurbished) 3GS under AppleCare. That was awesome - I love Apple. However, that didn't fix the problem
So now I'm not sure what to do accept wait for a new iOS version and hope Apple addresses this problem. Anyone else have a similar experience?

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to che

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing." I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

Hi ,
Please update to PSE 13.1
13.1 has solved this problem.
Refer to this link.
Photoshop Elements Help | Printer errors with Photoshop Elements 13

Photoshop CS2: "file not compatible with this version of Photoshop" error

So, I've been working with Photoshop for almost 20 years now, and lately I've been getting this error message on occasion (but not on every file) when I go to open a file I worked on just yesterday: "Could not complete your request because the file is not compatible with this version of Photoshop." I just worked on it yesterday in Photoshop. The file was saved as a PSD, and when I attempt to open it through Painter IX, that program tells me that it's not a Photoshop document. Why can't I open this file anymore, and why is it giving me this error message when I don't have Norton AntiVirus installed, and my 'maximize PSD and PSB file compatibility' is set to 'always'??
Does anyone have an idea on how I can open my file? How can I get around this, and how do I prevent it from happening again?
OS: OSX 10.4.11
Photoshop CS2
Info:
Kind: Adobe Photoshop file
Size: 394.4MB
Created: December 13, 2007
Modified: Yesterday at 3:54 PM

This is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please
cease and desist immediately
in the event you are currently experiencing problems with one or more files.
Working across a network is not supported.
See:
http://www.adobe.com/support/techdocs/322391.html
Copy the
CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does
not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Error message charging is not supported with this accessory

I have an iPhone 3GS from Jul 2009. Fully updated. I normally charge it using a USB port on my MacBook Pro so it also syncs at the same time. This week began getting an alert on my phone which said "charging is not supported with this accessory". I resolved initially by unplugging/replugging the cord. In all cases the phone had been charging for some time before the alert appeared. In most cases the phone was sitting on the same surface as the macbook and had not been moved since beginning charge.
The only support document I can find refers to firewire and does not apply to my device.
Since starting this week it is happening more frequently and may require being re-connected several times.
It is still intermittent issue but I depend on my phone.
Thank you for your assistance

I just found some on eBay for about 1.99 each with free shipping and ordered about 6 of them from the seller, I think they came from China so it takes a couple weeks. So far I never got a bad cable, but if you do use eBay please check their feedback to make sure they have a history of delivering quality cables and working cables. Always pay using PayPal if possible so you don't lose your money. There are online sites like Meritline and such that have cheaper cables for direct sales with PayPal checkout and free shipping.
I use the 6' cable in the car, so I don't have figure where to put the iPhone or iPod when plugged into the stereo and it is helpful to have them when trying to charge when the plug is being a dresser or something when I travel.
I also like the retractable cables ($0.99)
I also have the Scosche FlipSYNC Keychain cable too, a bit expensive, but you always have a cable with you just in case.
Message was edited by: cls24

How do I access "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...." web sites; when I try to download any alternate browser, then a warning that alternate is "imcompatable with your opera

How do I access websites that warn: "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...."? When I try to download any alternate browser, all I get is another warning that the alternate is "not compatible with your operating system." Is Firefox preventing this? The site listed below is a job application site. I've had this same problem with other job application sites also.
== URL of affected sites ==
https://storefront.kenexa.com/lithia/cc/Home.ss

There should be a User Agent Switcher menu item under Tools, which gives you the browser names you can impersonate.
The menu item name changes to the browser UA you are presently using.
There is also a User Agent Switcher button, you can add it using View -> Toolbars -> Customize, and dragging the button to your toolbar.
See http://chrispederick.com/work/user-agent-switcher/features/ and http://chrispederick.com/work/user-agent-switcher/help/
You can just start trying IE versions (or the versions it says on the site) until it lets you in.

My ipod touch 3rd gen doesnt work on usb charger but on dock it says "Charging is not supported with this device" How do I fix it?

I'm taking it in to get it looked at but will they cover this? And is there a way to fix it before I take it in. I'm still under the 1 year warranty plan. My friend said that they might exchange it. It's a 64GB and I use it for a lot of things like my picture, music, contacts, and email. It's got scratches on the back but other wise its ok the screen isn't cracked or scratched.
I have a usb charger for it but when I plug it into the PC or my wall charger it won't charge. It just says "Charging is not supported with this device". It even says that sometimes when it's not charging. But it works on a dock station like my clock or radio.
Also my home buttom won't work unless I press down real hard. This scares me because I'm afraid I wil persss it too hard and break it even more.
Please help.

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

What does this message mean Charging is not supported with this device?

What does this message mean Charging is not supported with this device?

You've gotten 2 good answers already, but there's a key assumption in both that you got the message when connecting the iPhone to some other device. If this is the case you can get an adapter in the Apple online store that will allow charging from older devices.
If, however, this message appears when you are not connected to anything the problem is dirt or moisture in the dock connector at the bottom of the phone. Clean it with a dry toothbrush or air blast.

RCVCAT database is not compatible with this version of RMAN

I am getting the below error while trying to configure rman catalog datababse.
rman target prod_dba/Pass1234@proddb catalog cat_dba/Pass1234@catdb
Recovery Manager: Release 9.2.0.1.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
connected to target database: TESTDB (DBID=2409515669)
connected to recovery catalog database
recovery catalog is not installed
RMAN>
RMAN> register database;
recovery catalog is not installed
recovery catalog is not installed
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of register command at 07/20/2007 19:05:40
RMAN-06429: RCVCAT database is not compatible with this version of RMAN
RMAN>
And Oracle version is same in proddb and catdb
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
PL/SQL Release 9.2.0.1.0 - Production
CORE 9.2.0.1.0 Production
TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
NLSRTL Version 9.2.0.1.0 - Production
any inputs...
Thanks.

Hi,
when upgrading catalog am getting the error like,
error occurred in source file: krmk.pc, line: 6986
text of failing SQL statement: ╠≥`☺
ORACLE error from recovery catalog database: ORA-00942: table or view does not e
xist
error occurred in source file: krmk.pc, line: 6986
text of failing SQL statement: ╠≥`☺
ORACLE error from recovery catalog database: ORA-00942: table or view does not e
xist
error occurred in source file: krmk.pc, line: 6986
text of failing SQL statement:µ`☺
ORACLE error from recovery catalog database: ORA-00942: table or view does not e
xist
Whether i need to run catpath.sql etc on the db?

TARGET database is not compatible with this version of RMAN

I am trying to register a database (version 8.0.4) on my catalog database which is version 8.1.7.
I get the following error:
RMAN-06185: Recovery Manager incompatible with TARGET database: RMAN 8.0.4 to 8.0.4 required
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-06429: TARGET database is not compatible with this version of RMAN
Does this mean that my RMAN database has to be 8.0.4 ?
What happens if my RMAN database is 8.0.4 and target is 8.1.7 ?
Thanks for any help,
Sameer

check RMAN compatibility matrix
Target/Auxiliary Database|| RMAN Executable|| Catalog Database ||Catalog Schema
8.0.3 8.0.3 >=8.x 8.0.3
8.0.4 8.0.4 >=8.x >= 8.0.4, see "Note 2: 8.1 or Later Catalog Schemas and 8.0 Target Databases"
8.0.5 8.0.5 >=8.x >= 8.0.5, see "Note 2: 8.1 or Later Catalog Schemas and 8.0 Target Databases"
8.0.6 8.0.6 >=8.x 8.0.6
8.0.6 8.0.6 >=8.1.x >=8.1.x
8.1.5 8.1.5 >=8.1.x >= 8.1.5
8.1.6 8.0.6.1 >=8.x 8.0.6
8.1.6 8.0.6.1 >=8.1.x >= 8.1.x
8.1.6 8.1.x >=8.1.x >= RMAN executable
8.1.7 8.0.6.1 >=8.x 8.0.6
8.1.7 8.0.6.1 >=8.1.x >=8.1.x
8.1.7 8.1.x >=8.1.x >= RMAN executable
9.0.1 >=9.0.1 >=8.1.x >= RMAN executable
In other words to backup 8.0.4 version u need a separate schema in catalog database and which will be only used for 8.0.4

CS6 file "not compatible with this version of Photoshop"

We are using Adobe Creative Suit 6. Yesterday i've created a file, and today i cannot open it with any software. (Bridge shows the thumbnail but the file is corrupted.) I get the "Could not complete your request because the file is not compatible with this version of Photoshop" error. The file contains multiple layers, without any masks. Originally it was a NEF file (Nikon raw). I used vanishing point, because its an interior photo. (it doesnt relevant for the problem) I have an earlier version, where the vanishing points are defined, but the textures are missing. Main question is, how this can be??? I worked on that version for more than 2 hours. The file size is small, it's only 133.579.959 bytes (133 Mb). The image is 4288 x 2848 px, 240 DPI, RGB 8-Bit, Fogra39 ICC profile. The computer is up to date, nor the hw or the softwares are corrupted. The file saved locally, so it's not a network problem. I saved the document, and left the machine for about 15 minutes, then i went back, so the save had to be complete. (on SSD it took about a couple of secs) The biggest problem is, i have to work with a large amount of photos in Photoshop. But after this i have some bad feelings about this job. We have to create these PSD files both for ourselves and for our client for further use. (It's a huge furniture factory) The hardware has 16 gigs of RAM with an Intel i5 operating system Windows 8.1. Any ideas? (ps.: i didnt' find PSErrorlog.txt file) Oh i almost forgot. After installing CS6 my Adobe Acrobat Pro stopped working in about 2 weeks... So. The job is waiting, but we cannot wait for a long time, we gonna loose our biggest client because of a sw error?

You write this is not compatible with this version. Did you install all updates and did you update the camera raw too?

RMAN-06429: TARGET database is not compatible with this version of RMAN

he Hi,
how can i solve this issue . how i will upgrade the Rman. My production database details are below
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
while i'm configuring rman i'm getting below error . please help me.
C:\Documents and Settings\vj.dcruz>rman target / catalog rman01/rman01@upp
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Sep 14 08:18:02 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Recovery Manager incompatible with TARGET database: RMAN 8.0.4.0 to 10.2.0.0 required
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-06429: TARGET database is not compatible with this version of RMAN
rgds,
john

Johnvd wrote:
Hi Hemant,
i'm doing same thing login 10.2.0.0 database and configure the rman but while connect target its saying that my Recovery Manager: Release 11.2.0.1.0 - Production on Wed Sep 14 09:04:59 2011
how its happening is there any where i have to change the path.
Regards,
johnJohn, you need to use the RMAN binary which is located in bin folder of Oracle Database (ie /u01/oracle/product/10.2/db1/bin). You shouldn't use "rman which comes with Oracle 11g client".
If you are using windows, run the following commands in command prompt and then copy/paste the output:
echo 5ORACLE_HOME%
echo %PATH%
If you are using unix, run the following commands in terminal and then copy/paste the output:
echo $ORACLE_HOME
echo $PATH
Regards
Gokhan

Error 2000 - The server is not compatible with this deployment client

I'm getting an error trying to deploy a composite. It works for everyone else on the team, and our configurations are the same (as far as we can tell). We've compared JDev version info.
Any idea what I can try? Thank you.
[12:57:48 PM] ---- Deployment started. ----
[12:57:48 PM] Target platform is (Weblogic 10.3).
[12:57:48 PM] Running dependency analysis...
[12:57:48 PM] Building...
[12:58:05 PM] Deploying profile...
[12:58:06 PM] Wrote Archive Module to C:\pkgs\svn\mdm\trunk\src\DRM WDK Source Code\Workflows\DrmRequestWorkflowSelection\deploy\sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
[12:58:06 PM] Deploying sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar to partition "default" on server soa_server1 [http://10.22.2.40:8001]
[12:58:06 PM] Processing sar=/C:/pkgs/svn/mdm/trunk/src/DRM WDK Source Code/Workflows/DrmRequestWorkflowSelection/deploy/sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
[12:58:06 PM] Adding sar file - C:\pkgs\svn\mdm\trunk\src\DRM WDK Source Code\Workflows\DrmRequestWorkflowSelection\deploy\sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
[12:58:06 PM] Preparing to send HTTP request for deployment
[12:58:06 PM] Creating HTTP connection to host:10.22.2.40, port:8001
[12:58:06 PM] Sending internal deployment descriptor
[12:58:06 PM] Sending archive - sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
[12:58:07 PM] Error deploying archive sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar to partition "default" on server soa_server1 [http://10.22.2.40:8001]
*[12:58:07 PM] HTTP error code returned [2000]*
*[12:58:07 PM] Error message from server:*
The server is not compatible with this deployment client: please verify that the server is a SOA managed server and that its version is supported by this deployment client
[12:58:07 PM] Check server log for more details.
[12:58:07 PM] Error deploying archive sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar to partition "default" on server soa_server1 [http://10.22.2.40:8001]
[12:58:07 PM] #### Deployment incomplete. ####
[12:58:07 PM] Error deploying archive file:/C:/pkgs/svn/mdm/trunk/src/DRM WDK Source Code/Workflows/DrmRequestWorkflowSelection/deploy/sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Edited by: J Keller on Jun 6, 2013 8:03 AM

Can anyone reply plz???

Error on Data Flow Task MSSQL 2012 Clustered "Description: The version of Lookup is not compatible with this version of the DataFlow. "

We have an SSIS package that runs on clustered MSSQL 2012 Enterprise Nodes that is failing. We use a job to executer the package.
Environmental information:
Product - Microsoft SQL Server Enterprise: Core-based Licensing (64-bit)
Operating System - Microsoft Windows NT 6.1 (7601)
Patform - NT x64
Version - MSSQL Version 11.0.3349.0
Package is set to 32 -bit. All permissions verified. Runs in lower environments, same MSSQL version. All environments are clustered. In the failing environment, all nodes are at the same service pack. I have not verified if all
nodes in the failing environment have SSIS installed. Data access is installed. We have other simpler packages that run in this environment, just not this one. Time to ask the community for help!
Error:
Source: Data Flow Task - Data Flow Task (SSIS.Pipeline) Description: The version of Lookup is not compatible with this version of the DataFlow. End Error Error: Code: 0xC0048020
Description: Component "Conditional Split, clsid {7F88F654-4E20-4D14-84F4-AF9C925D3087}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly. End Error
Description: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Conditional Split;Microsoft Corporation; Microsoft SQL Server; (C) Microsoft Corporation; All Rights
Reserved; http://www.microsoft.com/sql/support;0". End Error
(Left out shop specific information. This is the first error in the errors returns by the job history for this package. )
Thanks in advance.

Hi DeveloperMax,
According to your description, the error occurs when you execute the package with Agent job on clustered MSSQL 2012 Enterprise Nodes.
As per my understanding, I think this issue can be caused by you use SQL Server Agent to schedule a SQL Server Integration Services package in a 64-bit environment. And the SSIS package is referencing some 32-Bit DLL or 32-Bit drivers which are available
only in 32-bit versions, so the job failed.
To fix this issue, we should use the 32-bit version of the DTExec.exe utility to schedule the 64-bit SQL Server Agent to run a package. To run a package in 32-bit mode from a 64-bit version of SQL Server Agent, we can go to the Job Step dialog box, then
select “32 bit runtime” in the Advanced tab.
Besides, we should make sure that SQL Server Integration Services is installed on the failing environment.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

This AE is not compatible with this version of Itunes????

Hello forum! i just setup a TC with two AE with air iTunes. They both work excellent with the sort pauses. Today i decide to run the Ethernet cable to each AE. Did the setup as commanded, i just tested it with a Macbook and MacbookPro and both work fine no more lack(yey). Everything is up to date TC 7.5.1 and AE 7.4.2.
My problem is that when trying to connect from a Windows 7 pc just one AE is connected, the other gives me this message ""The Remote speaker is not compatible with this version of iTunes"" i did every i could, hard reset on both, new setup same OS on both... so i really do not understand what the problem.
i have the lasted iTunes on the pc( re-downloaded twice today)
or
if i just select the AE that give me the error work's fine, but when i add the second one it says it been used by someones else.
please help.......
Any help would be much appreciated!!
thanks have a nice day
Message was edited by: elcarra21

Hello qqnicol,
What program do you run?
Please contact the software provider to confirm if this 32-bit program can run in 64-bit Windows.
As some programs can only run in specific version of Windows, please download the right version of software.
Most programs designed for the 32-bit version of Windows will work on the 64-bit version of Windows. Notable exceptions are many antivirus programs.
Device drivers designed for the 32-bit version of Windows don't work on computers running a 64-bit version of Windows too.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

HT201401 CHARGING IS NOT COMPATIBLE WITH THIS ACSESSORY

Similar Messages

Maybe you are looking for