HT201401 does not switch on
Iphone 3G was not saving taken photos so I went to Reset menu and picked Reset all setting. After all reset were done, the phone never switched on again, keep trying (i can see Apple sign) but nothing happened When I try to connect to Itune, no Device comes up as the phone does not seems to be recognized at all.
Please help.
Thank you.
Veronika
Try putting the phone in recovery mode.
Try turning it off... Then press and hold the Home button and connect it to your computer with iTunes open.
iTunes should say, "An iPhone has been detected in recovery mode" and continue to restore the device from there.
Similar Messages
-
My Mac Pro does not switch off.
It worked before Lion. Installed 10.7 and also upgraded to 10.7.1 but, on both cases, it does not switch-off. To be precise it "sometimes" switch-off but many times it does not. Let's say once on 15 times... With Leopard I nevere had this problem. (it persists also after a PRAM reset). I also run a second problem but only once and only upgrading to 10.7.1 (not to 10.7). It says that my RAM was on wrong position.. I had to remove and install the RAM again and it worked.
Any other case like this? (This append only on my MacPro - early 2009. On my MacBook and my MacBook Pro OSX Lion works fine).Is there a pattern to the chimes, or are they simply random, as if the Mac is repeatedly rebooting on its own?
Have you tried a "Safe Boot"? Press and hold a Shift key as you power up the Mac. Does it start then?
If it starts at all "Safe Boot" will take much longer than usual, that's normal. Shutting down will take longer also. Try it. -
During audio messaging the send button does not switch to a microphone after selecting a contact
During audio messaging the send button does not switch to a microphone after selecting a contact
Actually, this problem is the same as the one described in your other thread, and should be fixed as well after following the procedure described there.
-
The off button does not switch to 'hibernate' or lock when playing music.
The off button does not switch to 'hibernate' or lock when playing music. I have to hold the off button down
for a prolonged period of time to get it to switch off; have had to resort to holding the off button and the main
button simultaneously to reset but no improvement.- First try restoring the iPod from backup via iTunes.
- If problem persists, restore to factory defaults/new iPod.
- If still a problem than you likely have a hardware problem and an appointment a the Genius Bar of an Apple store is in order. -
"Fn+F5" does not switch the wi-fi in G410m-mm
Hello!
"Fn+F5" does not switch the wi-fi in G410m-mm. How to make the shortcut work? All drivers and utilities are installed.
Regards,
Dmitryskripatch wrote:
I suggest another driver for cardreader or maybe you're trying to use SDHC cards instead of SD.
I doubt that you'll be able to return it in MM after 20 September.
Due to Russian law suite after two weeks you can only return it in case of unrepaireable malfunction. If you hurry up right now you can come in time.
Thanks skripatch for your opinion!
I tried with both drivers: from the driver CD and from the site. The cards are readable in the G410 through an external USB reader. The cards are not SDHC, they are 64mb and 2gb miniSD cards in a SD adapter. I bought the G410 on September 25, not 20. Why can I "come in time right now", but not between September 20 and 25?
Regards,
Dmitry
Message Edited by di on 09-16-2008 02:45 AM -
Imac does not switch on anymore
My new imac does not switch on anymore.no signal,simply.no procedure worked(command plus alt plus p plus r or whatever
Contact AppleCare... you have 90 days Free Telephone Support and 3 years if you Purchased AppleCare...
Apple Contact USA
http://www.apple.com/contact/
Contacting Apple World Wide for Support and Service
http://support.apple.com/kb/HE57 -
After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?
Have you tried changing the order in Network Preferences pane?
Open System Preferences/Networks/Click the gear symbol under the service list. Select set service order then drag. If your wifi is above the ethernet move the ethernet to the top. Click ok. Click apply (bottom left) and test.
Hope this helps
PJRS -
Middle click on search suggestions in Search Bar does not switch to new tab
I use profile option "When I open a link in a new tab, switch to it immediately" = yes (check marked)
Middle clicking on a search suggestion in the Search Bar does open a new tab but Firefox does not switch to it.
This feature used to work for many years until very recently.
Anybody have any ideas?Did the problem start with the new search bar design in Firefox 34?
If you want to switch back to using the old bar, it's still hidden inside. Here's how you would do it:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box that appears above the list, type or paste '''search''' and pause while the list is filtered
(3) Double-click the '''browser.search.showOneOffButtons''' preference to switch it from true to false
This doesn't affect the current window, but each new window you open (Ctrl+n) will have the old Search bar.
I'm not sure when that will be phased out... -
HELP! My MacBook Air does not switch on at all
My MacBook Air does not switch on at all. I press the "switch on" button but nothing happens. The battery is fully charged and the laptop is absolutely new (2 month of rare use). Have no idea what's wrong with it.
Thanks in advance.Hi Aliyusha,
welcome to the forums. I'm sorry to hear about your computer issues.
Do you get a chime? dose the sleep led turn on or blink? What about the led on the power adapter, that LED on or off?
Apple Portables: Troubleshooting MagSafe adapters
http://support.apple.com/kb/TS1713
Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964 -
Hello,
my appr. 2 year old at270 has "problems to switch on" since some time (Display stays dark although the buzz tells the tablet reacts). I thought I might have software problems and resetted.
Now it does not switch on at all, but maybe this is not completely true, because attaching the tablet via usb to my Desktop the Explorer shows its directory.
Do I have a hardware problem ???> Do I have a hardware problem ???
It looks so
You could try to perform hard reset pressing and holding the power button and volume up button.
Usually this enables the advanced menu where you should be able to choose the reset option. -
ThinkCentre Edge 71, Power LED does not switch off
Since I have installed win7 64bit, the pc does not switch off after Power down command. For switch off i must hold the power button >10sec.
Thanks for Help.Hello Walter,
Please update the BIOS which will resolve the issue.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_bios/9qjy36usa.exe
You may also try the Windows registry setting. Kindly be careful while editing windows registry.
Have a look at the following registry location (note that you need to invoke regedit.exe with administrative privileges in order to make any changes in this location) and ensure that the value ClearPageFileAtShutdown is set to 0 (if it is set to 1, change the value to 0).
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Mission Control: Application Does Not Switch To Assigned Desktop Once Open
I have Adobe Photoshop CS5 assigned to DESKTOP 2 in Mission Control. If Photoshop is closed, and I launch it from the dock or Launchpad, Lion switches to DESKTOP 2 to launch Photoshop. This is what I want.
However, if Photoshop is already open and I click on an image file in Adobe Bridge, or Finder, Lion does not switch to DESKTOP 2. Photoshop will launch on whatever desktop I am on, in front of Finder or Adobe Bridge.
I have experienced this when I have "Automatically rearrange spaces based on most recent use" and "When switching to an application, switch to a desktop with open windows for this application" on or off. Both settings seem to have the same problem.
Is anyone else experiencing this? Any suggestions? I used this feature extensively with Spaces, and Lion is killing my workflow unless I can get this figured out.
Thanks!!Wait DONT reinstall yet!!! there is a switch for this:
I bet yours is toggled the wrong way.
Message was edited by: coocooforcocoapuffs: never mind, did not read your post properly. -
Dictation does not switch language
When I hit the language icon in the menu bar, it does not switch language like my ipad does. Is it possible that the ipad has more functionality than the mac book pro?
OS X and iOS are totally different is this area. The language icon in OS X only changes the keyboard, nothing else. Dictation language is set in system preferences. But there is also an easier way
http://fouquet.me/apps/dictationswitcher/ -
I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?
Voicemail is a carrier feature, not a phone feature. This has to be fixed by your carrier, so contact them, as obviously, voicemail is not properly provisioned on your account.
-
Satellite 2410-303 does not switch on
Hello there,
we have a system here on the bench with the following problem:
- system does not switch on
- with battery inserted power LED keeps on blinking in yellow
- connected to mains power LED keeps on blinking in yellow
- no sound of fan or spinning HDD
- no other LEDs come on
Any ideas?
Tia
W. PfifferThere is no much to say. I presume blinking LED sends a code. Sorry but I am afraid there is nothing to do. Contact authorized service partner and let them check board electronic.
There is probably some problem with power supply electronic.
Maybe you are looking for
-
Converted to Lightroom from Elements 5
I installed the trial version from a link found in a message on this forum and imported from Elements 5. Luckily, I only had something less than 3000 images loaded into Elements and hadn't done serious tagging on most of them. I decided to use this t
-
I am not able to ENLARGE photos on Facebook, this means photos that friends post on News Feed & photos that I post in my FB photo albums. I only get a BLANK, BLACK screen when I click on individual photos. A friend suggested that I upload the New Fir
-
Want to: Cut PDF in the middle auomaticaly
Hi, I am using Adobe Acrobat X Professional and got a lot of book-scans with a doubleside (book) on one side (pdf). To read the books on my e-book-reader I would like to i) cut all pages of an document (better: a lot of documents) at the half of the
-
How to upload all the customization of infopath on different site
Hi We have a sharepoint site have 5-6 custom List. We have customized the forms of every list using InfoPath. Now this site is used as the template for other 50 sites in production environment. These all changes are published in production environmen
-
How do I get rid of the start-up window?
I've just installed QuickTime, but when it started I was presented with a window full of advertising. I cannot find anything on the menu allowing me to disable that gross display. How can I get rid of this start-up headache? Thank you for any helpful