HT201401 Few digits of my iphone 4S key board are not responding.  kindly advise.

Few digits of my iphone 4S key board are not responding.  kindly advise.

Hello Sp2sun,
Thanks for using Apple Support Communities.
Use this article to troubleshoot touchscreen issues
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/TS1827?utm_source=twitterfeed&utm_medium=twitter
Tip: To isolate an issue related to a portion of the Multi-Touch display, follow these steps:
Open the Maps application and double-tap each corner, then the center, to verify that it zooms in to each section.
If a specific area is affected in another application, note the location and try to verify touch functionality for that location in the Maps application.
On iPhone and iPod touch, you can also use Calculator:
Open the calculator app to test all but the top row of the screen. Press each button on the calculator and verify activity.
Have a nice day,
Mario

Similar Messages

  • I accidently deleted a few photos on my iPhone 5c and they are not in deleted photos folder. Is there a way to get them back?

    I accadently deleted photos on my iphone 5c and they are not in my deleted photos folder. I did not back up my photos, is there anything I can do to get them back?

    restore from a backup dated prior to when you synced to the new computer.
    ideally... were you backing up to icloud?  if so, erase all content and settings and restore from a backup in icloud dated prior to when you synced.  Camera roll backs up I believe and those photos will show back up

  • On iPhone 5 key board will not adjust when turned horizontally

    On my iPhone 5, when the keyboard is turned horizontal it stays in the vertical mods.  Is there a fix?

    With every app that uses a keyboard?

  • On my iPhone 4S, my headphones are not plugged in and yet I still have no sound out of the phone receiver. I've reset the phone a few times and still the same thing. HELP?

    On my iPhone 4S, my headphones are not plugged in and yet I still have  no sound from the phone receiver. I have reset my phone a few times and it still tells me when I push the volume buttons that it is my headphone volume. I have even tried turning off my  Bluetooth setting and it still tells me that my headphones are where the volumes is. AHHHH!!!! I can not talk on my phone unless I use my blue tooth. Nothing is coming out of the receiver of the phone. HELP !!!!

    Hi LittleBuffalo!
    I have an article here that describes your issue and can provide you with some more troubleshooting steps:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • My young kids have ipads and since I updated the software, but they have their own icloud account, predictive text within their messages shows all my contacts from my iphone but the contacts are not listed as their contacts, how do I stop this?

    My young kids have ipads and since I updated the software, but they have their own icloud account, predictive text within their messages shows all my contacts from my iphone but the contacts are not listed as their contacts, how do I stop this?

    I have deleted the iCloud account under my name on their iPads and replaced with their ones. Apple support said yesterday I needed to click the small 'I' by each name as it came up in the TO box and remove it. After doing rid for each contact under each letter of the alphabet it should remove them from latest contacts. Having done this, although I could not remove groups I had sent, I am not convinced they will not return once I have written a few texts, any ideas?

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • Since Mavericks update my iPhone and iPad calendars are NOT syncing with the calendar on my MacBook Pro

    Since Mavericks update my iPhone and iPad calendars
    are NOT syncing with the calendar on my MacBook Pro.
    I used to use iTunes but don't see the options now.
    Does anyone know how to set up a sync.?

    I have temporarily solved the sync problem by using an older MBAir running snow leopard, I exported
    both calendar and contacts and imported them in the MBA and synced normally.
    Since I'm not about to send my data on the cloud, or setup a server to just sync my iphone,
    I think this is a good workaround ! BTW I stopped updating my contacts and calendar on the MB, I only
    update the iphone until a permanent solution is found !
    And they better come up with one soon, because I'll just switch to an Android phone and Ubuntu linux for my MBP, Apple should make our lives easier, not harder !
    I'm sure Samsung is having a ball ever since the sync issue was made public !
    Hopefully Apple is listening and will make things right again !

  • I am making an iMovie trailer on my iPad 3(updated) and I recorded a few clips on my iPad Camera but they are not being detected on the iMovie Videos section. How can I make them show up?

    I am making an iMovie Trailer on my iPad 3 (updated) and I recorded a few clips using my iPad Camera but they are not being detected on the iMovie Videos scetion. How can I make them appear so I can use them in my trailer?

    Hi Stuck-in-NY,
    If you are looking to transfer your purchases to your computer, you may find the following article helpful:
    Apple Support: Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Regards,
    - Brenden

  • My 6, 7, y, u, h, j, n, m key's are not working on my hp pavilion g6 PLEASE HELP!!!

    my 6, 7, y, u, h, j, n, m key's are not working. they used to work but even then i had to hold down one of those unresponsive keys to get the others to work now i can't use them at all!! i have to use the on screen keyboard which is really annoying but is the only way i can use my laptop
    i have a hp pavilion g6 4GB  i3 core 64 bit windows . i think the warrenty has expired as it is a refurbished laptop

    Hello momomhammed:
    I think you forgot to type in HP g6 1239as because I could not find HP g6 123sa. This is the only steps they give for your lat top. http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01458194&tmp_task=solveCategory&cc=uk&dlc=en&lc​... I would do the reset direction first then do the update drives for it. To see if that fixes the issue. If it doesn't then yout computer needs repairing. frrw.

  • GeoMedia - Primary key types are not matching

    I'm working on converting Access Spatial layers into Oracle Spatial layers using the Locator in Oracle 9i.
    I have the Access PK as Long Interger
    and the Oracle PK as Number (10,0).
    I can't get around this error : Primary key types are not matching

    Hi,
    please refer to
    http://www.oracle.com/technology/pub/notes/technote_access_migration.html
    You may try the OWM (Oracle Migration Workbench), if your data are more complex than one or two tables.
    regards, Andreas
    long integer(access) Number(11,0)(default) Number(11,0) (recommended)
    -----

  • Hello After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

    Hello
    After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

    I found this other thread discussing this topic, no fix, I will revert to 9.1.1 from Time Machine and wait for a new update.
    https://discussions.apple.com/thread/3023160?

  • Some key figure are not update for movement type 101

    Dear All,
    I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
    I have loaded the data according to stranded procedure in "How to Load...."
    I have checked the values of material in R3 and it is there.
    Example of the record::
    Material    Plant Movement type  Calender Day    quanity Base Unit
    10101      01       350                     01.02.2006     20             KG
    10101        01       101                     05.07.2006                      KG
    10101         01      101                      10.07.2006                      KG
    The Quantity is not appearing in second and third record.

    Hi,
    Please check whether you have set  ''Rule groups''  at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
    Please check whether you have set this option at transfermation level.
    For example, may be in your case materials from different plants are updating to different key figure.
    Thanks,
    Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM

  • I can not delete emails that appear in the search of my iPhone 4S. They are not in any of the mail folders or on the server. How can I do it?

    I can not delete emails that appear in the search of my iPhone 4S. They are not in any of the mail folders or on the server. How can I do it?

    If you have the serial number of the phone, put it in here
    To find the serial number without switching it on, read this article:
    Find the serial number and other information for your iPhone, iPad, and iPod touch - Apple Support

  • I am using my iphone 4s here in dubai.Do i have to install any application to use siri..?? Coz i tried using them and i alwayz get ans which are not relevant.Please advise.

    I am using my iphone 4s here in dubai.Do i have to install any application to use siri..?? Coz i tried using them and i alwayz get ans which are not relevant.Please advise.

    No Siri is preinstalled.  Check you have enabled Siri correctly in Settings>General>Siri>ON and ensure you have completed the My Info correctly.  Siri uses the information in your My Info which is taken from your contact card to respond. Also Siri is still in beta and currently uses limited languages i.e.
    English (United States, United Kingdom, Australia)
    French (France)
    German (Germany)
    Finally just check your restrictions in Settings>General>Restrictions>Siri>ON

  • I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it

    I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it, and I can't for the life of me figure out how to fix this.  Can anyone help?  of course this happened after my warranty expired.

    **update**
    I don't know if this will help someone but I am posting this for that purpose.  In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!).  Well I didn't want to do that but it always stuck in the back of my mind.  I had given up, really, and was planning to take my MBP to the apple store.  But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working. 
    So, maybe try keeping the MBP in a cool place when it's off.  Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
    Hopefully this might help someone.

Maybe you are looking for

  • How do you know what exception to throw?

    I want to make sure that I'm using exceptions properly, and I understand the whole try/catch block, but how do you know what type of exception to throw? Is there a list somewhere of all the different types of exceptions?

  • Mac firefox cannot open .url files from PC

    I have hundreds of pc .url files that I want to import as bookmarks. Mac Firefox opens the files as a text file, not as a web page. Mac Safari can open them no problem.

  • What iOS Developer Program license should be used?

    What iOS Developer Program license should be used for the following scenario: our company wants to develop an app to be distributed among employees, our subsidiaries, our service/sales partners (distributors of our products) and finally end-users. Th

  • Some Hostname is not seen in DNS Manager ( Windows Server 2008 )

    Hi All, DC Server OS - Windows Server 2008 R2 ( Active Directory Integrated DNS Zone ) Client OS - Windows 7 I am unable to understand, why some hostname are not dynamically registered in DNS Manager. For example -My windows7 which is added to corp.a

  • Looking for some DBA scripts.

    I am a DBA. Can any off u send me few sql scripts which would help me in monitoring the DBA activities, Like a) Monitoring the Disk Usage for a particular Database. b) How to check the rollback segment is increasing or not. c)In NT where the datafile