HT201401 how to erase a wifi network?

Please indicate how to erase a wifi network due to changes in specifications

Did not work. I chose the 2° option of completely ersasing all networks. After that when I found my network and put the password, I get the message "can´t connect to network". I know that the password is correct because I connect with my PC it works. What other suggestions do you have?

Similar Messages

How to create a wifi network with macbook.

How to create a wifi network with macbook? I dont have wifi for my itouch. I am trying to create a wifi through my macbook for my itouch. does anyone know how that works? thanks

Open the Sharing pane of System Preferences and enable Internet Sharing over AirPort.
(59391)

Satellite P100-221 - How can I access WiFi networks?

I have a P100-221.
I want to access WiFi networks.
I dont know how to do it. Which driver should I install?
Any help please?
Regards
Nevzat

Hello
If Windows recognize a WiFi network you can access and normally you will need a password. If you know this, you have access to the network.
Furthermore WLAN must be enabled with the WiFi switch on the notebook and by pressing FN+F8.
For this its not necessary to install a driver but if you need a driver you can find it on the Toshiba website.
I think you should look in the user manual. There you can a lot of informations about your notebook and informations how to access to a WiFi networks.
Sometimes its very useful the user manual.
Greets

How to see if WiFi networks are WEP or WPA in Windows 8.1 ?

This is infuriating. Since I upgraded to Windows 8.1, there is no way to see if WiFi Security ie WEP or WPA on hovering over the network. Also I can not right click to forget the WiFi Network. So, how do I find the security of available Wifi networks
and manage WiFi profiles ?

Hi,
In Windows 8.1, some UIs for Wifi have been removed.
You can refer to this article to manage your Wifi on Windows 8.1:
Manage wireless network profiles
http://windows.microsoft.com/en-us/windows-8/manage-wireless-network-profiles
Hope this would be helpful.
Kate Li
TechNet Community Support
Crazy and senseless remove every UI WIFI tool from 8.1. But why?!?
On Windows 8 we lost the WIFI network manager there was on Windows 7. And now with 8.1 we lost the ability to forget a network too.
No way to come back to make things with sense? Why people in 2014 have to use the DOS Prompt to cancel a WIFI network? Is this a customers OS oriented?

How do you find wifi network security key?

How do you find the wifi network Security Key? Not password --- KEY?

The "key" is probably totally useless to you, since it is 64 characters long and very few things will accept an item of this length.
If you have an Apple AirPort router, we can tell you how to find the "key" for the network that it is creating, if you can tell us what operating system your Mac is using.
Most manufacturers use the term "key" to mean the normal wireless network password, which is also known as passkey.

How to use 5Ghz WiFi Network?

Hallo,
as a new apple AEBS(n) new user, i tried to convert my wifi network from the single 2.4Ghz radio signal to the better and faster one an 5Ghz Wifi Network, that will Stream to my ATV 2 movies and tv shows in the best and fast way.
i didn't very success on that one?
and i will love to get your support with that.
and one more thing how do i know that my atv streams on the (n) protocol ?
Thanks everyone and regards
Oria Maymon

Pappasbike wrote:
It's possible your imac is too far from the base station to see the 5G network. It should show up in the list when you click on the Airport icon on the menu bar. If it doesn't you might try moving it closer to see if it becomes visible then. Make certain that you don't have the base station set to "create a closed network" which might require you to manually enter the network name and password the first time. If the computer is going to be too far from the base station to get an acceptable signal on the 5G network you may just have to let it connect to the 2.4. You can still set that to be an N only network so theoretically you should see faster connection speeds.
hi,
my imac is 5cm far from aebs. he is near by the imac, and still i cant identify the 5ghz from my imac like i see her in the atv2.
the atv2 is 3 room far from the aebs and the signal is strange.
Message was edited by: Oria Maymon
I only have the US version of the AEBSn to20 compare and it doesn't show an Israel option either. I do know that Wi-Fi only operates in the narrow MHz band in Israel and that channels run from 34 - 64. The upper channels (100 - 165) are not allowed. Unfortunately (for me) none of the country choices would provide you with the correct range of channels for your country.
Did you buy the AEBSn in Israel?
no, there is no such one to sale on israel, i have to ebuy him.
i get to the manual radio channel select and picked up a channel between 36-64 5ghz its ok?
Message was edited by: Oria Maymon
Message was edited by: Oria Maymon
Message was edited by: Oria Maymon

How to extend a wifi network of third party router with TC 4th generation?

After searching the communities for a while, I did not find a definitive answer on the following question:
- I recently bought a 4th generation Time Capsule 2TB (MD0322/A), that I also want to use as an extension for our existing wifi network.
- This wifi network is maintained by a Sitecom Wireless 300N XR Gigabit Router. Router is set to work over 2.4 GHz (B+G+N) because of several non-N-wifi devices in the network. The channel in use is currently 11.
- This router provides so called WDS functionality, i.e. the ability for other wifi access points to act as a seamless extension of the basic wifi network (using the same SSID).
- The security settings in the router are WPA2 Mixed, with a password in plain ASCII.
- There seems to be no way to set different security levels for WDS-connections versus normal AP (access point) connections. If WDS is enabled, the security settings of the AP-mode are extended to the WDS connection.
I have set the Sitecom router to enable WDS, and added the MAC-address of the TC in the configuration of this router.
When configuring the Time Capsule, with Airport Utility 5.5.3, I can select the option to use TC to extend an existing network, and I can select the network of choice using the WPA personal or WPA/WPA personal security. However, the TC does not succeed in extending the network, and reports this back. If I manually configure the TC and select the network of choice, Airport Utility reports back that the selected network cannot be extended.
I have read several times in other posts that Time Capsule can only connect to third party routers via WDS using WEP-authentication, but these posts were quite old. I was wondering if this is still the case, or that Apple has updated this functionality in newer versions of TC, and thus there could exist a trick to connect to a WDS using WPA.
I really would appreciate suggestions
Bram Bos

gilles13 wrote:
I have a mac and pc (win7) both are connected thru a network with wifi and allready two access pt.
Airport can not be used to extend a WiFi created by a non-Apple box.
You need to turn off the radio in the router (shut down the existing WiFi). Purchase TWO Airport Express units. Connect one to the router with an Ethernet cable. Configure that one as your primary WiFi network and then use the second Express as the extender.
You need to locate the second Express where it receives a decent WiFi signal. Too far away and it has nothing to extend. Too close and it doesn't buy you anything. Before you plug in the second Express, check to see where the primary WiFi disappears completely. My personal WAG is that you want to locate the second Express 2/3 the distance to that point.
If you use Airport Utility to configure the units, it's a snap. In fact, if you configure the primary first and the extender second, AU will default to exactly the settings that you want.
By the way, I refereed to the Express because it's less expensive than the Extreme and you didn't indicate any need for the Extreme features.

How to read connected wifi network password programetically in Mac

Hi,
       In my application, i want to read currently connected wifi network password programetically.
       Is there any way that i can use apple api's to read wifi network password.
       I feel there should be some way to read in Mac also, because windows exposes an api - WlanGetProfile, which returns complete profile of currently connected wifi network along with the password.
       So i want to know the similar api in Mac.
       I have gone throught he /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist - but i contains only ssid name only, no password is saved in this file.
       Can any one let me know about this.
With regards,
K.Thejonath.

Thanks for the info.
However i am able to read wifi password in Mac OSX.
It is possible making use of api's CWKeychainCopyPassword() & CWKeychainCopyEAPUsernameAndPassword() .
With regards,
K.Thejonath.

How to share mac wifi network to iOS devices

I have a network connection on my Macbook Pro via wifi only. Is there any possibility to share wifi network from Macbook to iPhone or iPad using Airport/USB?

this should help
http://www.maclife.com/article/howtos/how_wirelessly_share_internet_connection_m ac

How to unlock my WIFI network.

friend is visiting but can't get on my wifi network because it is locked.
SYSTEM PREF>NETWORK>AIRPORT>ADVANCED>NAME OF MY NETWORK>PEN ICON>I CHANGED WPA2 Personal (generated password) to NONE. then i save and also it asks u to save when closing out of network pref.
when i go back in, WPA2 Personal and greyed out password still appears (until you click pen icon to attempt to change)
so it seems it is not changing my selection to 'none'.

indore wrote:
friend is visiting but can't get on my wifi network because it is locked.
SYSTEM PREF>NETWORK>AIRPORT>ADVANCED>NAME OF MY NETWORK>PEN ICON>I CHANGED WPA2 Personal (generated password) to NONE. then i save and also it asks u to save when closing out of network pref.
when i go back in, WPA2 Personal and greyed out password still appears (until you click pen icon to attempt to change)
so it seems it is not changing my selection to 'none'.
You don't change router security settings with the System Preferences/Network/Airport interface. This is only for setting the security type and password that your computer will use to logon to your wireless network. To change your router's security type you must log on to your router. If you have an Airport router you can do this with the +Airport Utility+ which is found in the Applications/Utilities folder on your Mac. If you have another type of router you can usually change your router's security settings with a browser interface to the router. You should follow the router management directions which can normally be found on the manufacturer's support web pages or in the directions you got with your router.

How to create a wifi network with airport express in hotel room?

When I'm traveling to hotels that have internet, but not wifi, how do I set up a network using airport express? When I've done this at home, I've used my laptop with the airport utility. Can I do it with just an iPad?

Yes, you can use the Airport Utility for iPad here:
https://itunes.apple.com/us/app/airport-utility/id427276530?mt=8

HT1695 how do I unlock WIFI network if it will not accept password?

<Email Edited by Host>

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How to create a wifi network between Mac and iPhone

Hi there,
I have just wired Internet at my house, and i would like to create a network with the wifi of the mac, to connect my iPhone to the Internet.
Is that possible?
i have tried to do, I've created a network, encrypted it, the iPhone recognize it, but when i try to use safari, the following message appears.
"safari can`t open the page because it can't find the server"
So, is that possible and i am doing something wrong, or it isn't possible?
thx in advantage
Marcelo França
Brazil

This is a possibility. But please be aware using your Mac to emit a WiFi connection is a temporary solution. And it will get a short range unlike an actual WiFi Router. Also you may find it to be unstable at times. The Airport Card in your Mac was not designed to be a full time Router WiFi emitter. But more of a receiver to get the signal and use it for personal use.
1. Unlock the network on your Mac make it an open network
2. Go to your iPhone, Settings-Wireless-Tap on blue circle next to network name, Choose Forget network
3. Now go back, It will rescan and find an open network, Connect, and see if Safari works
If Safari works, Then you had a Security issue. Try using WEP 128 bit 13 character passkey or WEP 8 Character Passkey.
Cheers and best of luck
Message was edited by: Andrew T.

How to "hide" AE wifi network?

Is it possible to set my AE base station to NOT announce its name to the entire neighborhood? If so, how? And, if so, is there any disadvantage to doing this? Thank you! (I do have my network protected with a password).

Is it possible to set my AE base station to NOT announce its name to the entire neighborhood?
Yes
Open AirPort Utility - click Manual Setup
Click the Wireless tab below the row of icons
Click Wireless Network Options
Enter a check mark next to Create a Closed Network
Click Done, then Click Update
Downsides...there are plenty of free utilities available on the Internet that will reveal your network in seconds, so a Closed Network setting is considered a thing of the past. True, it might keep a few honest neighbors from seeing the name of your network, but the neighborhood kids and any computer guys looking for free wi-fi will spot it very quickly, so be sure to use good security like WPA2 Personal and a long, non-dictionary password to make things more difficult for them.

How to create 2nd Wifi Network from one cable modem

Hello, I am trying to create a 2nd wireless network from one cable modem. Currently I am using an Airport Express connected to the cable modem. I also have an unused Airport Express that I would like to use for the 2nd network. The Motorola modem has only one network cable port in the back. I am currently using Time Warner as my service provider. Can someone tell me if a network switch would suffice or would I need a new router, and how would I set them up? Thanks.

Unfortunately you will not be able to create two separate Wi-Fi networks with the current models of the AIrPort Express that you have. You would need at least one 2nd generation Express and one 1st generation Express to do so.
The 2nd generation Express would be connected directly, using Ethernet, to the Internet modem, and the 1st generation Express would be connected, via Ethernet to the 2nd gen. In this configuration each Express could be configured to provide a separate Wi-Fi network with each using a different security type.

HT201401 how to erase a wifi network?

Similar Messages

Maybe you are looking for