HT201401 i have recenty updated my iphone3gs into 5.1.1 and it extraced files also after that i chose language than country then there is problem in wifi network its saying connect to itunes in itunes it is telling that there is no sim card intalled in
hi sir i have a problem in my iphone
The phone was originally locked to AT&T in the US and was hacked to allow it to be used on another network. Restoring the phone has re-locked it to AT&T.
AT&T does NOT unlock iPhones for any reason. You can't use that phone except on AT&T.
Sorry. It's useless to you. Sell it and purchase one you can use.
Similar Messages
-
Forgot my password now its saying connect to itunes
i forgot my password then tried it too many times and now its saying connect to itunes but when i do it says to access the phone on itunes i have to put it the password on my phone?? so confused??
If you cannot remember your passcode then you must restore the iPhone as a new device: iOS: Forgot passcode or device disabled
-
I know my passcode but i put wrong 6 time, now its say connect to itunes ?
on my iphone 4s .i know my passcode but i put wrong 6 time, now its say connect to itunes . what i gonna do?
See: Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
-
it says connect to itunes but i cant because a pop up comes up saying "Itunes could not connect to the IPod because it is locked with a passcode. then it says to enter the passcode, i cant because it says connect to itunes. Please Help
Place the iPOd in recovery mode and then restore via iTunes. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
can any1 help me out with my ipod touch....I had my ipod in my pocket on lock and when i pulled it out to use it,it had ipod disabled and underneath that it had connect to itunes....unfortunately i am unable to get into my ipod its like locked me out....hope some1 out there can be of help...any advice given is much appreciated
The screen is telling you to connect the iPod to your computer and restore via iTunes. You may have to also place the iPod in recovery mode in ordrer to allow a restore. For recovry mode:
iPhone and iPod touch: Unable to update or restore
For information see:
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen -
how can i reset my ipod touch if someone made too many passwords on my ipod touch
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
After I tried to update my Ipad mini to the newest update, it kept saying hello on my lock screen in different languages and then when I slide the screen across, it says connected to itunes but it's not doing anything!! By the way my Ipad mini is plugged into my computer and connected to itunes!! Please help me!!
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
My iphone3gs has been turning off and turning on , even at every%. it has been doing that for quit a good bit now. now my iphone is still doing the same thing, but once it came back on its saying connect to itunes. i have my itunes pulled up, but my iphone is not being recgonized. what can i do... could i get a new iphone for free, and keep my gophone plan? please help? what can i do?
Hi there Jackie Silver,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. -
my ipad is locked and its saying connect to itunes which i have done and on itunes its saying ipad can not connect because its got a passcode but i cant type the pass code in because its locked what do i do
You need to follow the instructions in the second half of that page
Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
So you need to click on the 'If you have never synced your device with iTunes, or you do not have access to a computer' heading and follow the instructions underneath it -
i have forgotten the password to my ipad and its says connect to itunes but i cant connect it to my computer because of the code on the ipad so i need to know how to wioe the whole ipad and start again like a brand new ipad?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
When I got my ipod I made an account with iTunes right from my ipod.Yesterday, I made a password lock to get into my ipod and I couldn't get into it even though I did the correct one. Now it says"connect to iTunes" BUT I can't because I never registered on the computer. I've tried holding the home and sleep/wake button for 10 sec and then only the home for 5sec and that might have reset it, but it didn't help. If any of you guys know what to do so I can unlock it I would appreciate it VERY much.
If you haven't done so install iTunes on your computer. http://www.apple.com/itunes/
Follow the instructions here: iPhone and iPod touch: Unable to update or restore -
My iPhone4 will not come on. When i plug it into the charger, it only says connect to iTunes. When I tried restoring it, it said my iPhone4 could not be restored.
Try this
http://support.apple.com/kb/HT1808 -
I forgot my password. The phone says connect to iTunes but my phone will not go into recovery mode
I forgot my iPhone password and my iPhone is now disabled and says connect to iTunes. I am away from home for another week. I have borrowed a laptop and done as suggested. turn phone off and then press home button and attach USB lead, phone should enter recovery mode. It doesn't. I initially get the charge bar and then the opening screen saying my phone is disabled..
help pleaseits a PC.
FInally got it into recovery mode and connected to iTunes. But it spent 70 mins or so downloading the software update, and then still said it needed the (forgotten) password am having a second go -
How do i get into my ipod when my password says connect to itunes?
need help can unlock ipod doesnt let me try just says connect to itunes can you help me?
Do as it states on the screen, connect to iTunes then restore the device.
-
My seven year old daughter got an ipod touch a few months ago from her father. She has now forgotten her password and it has been tried too many times and so the ipod has been disabled. It now say connect to itunes. I have tried to do this with the USB cable and itunes on my computer. Unfortunately it will not work as it will not connect saying the device is locked and to enter the password.
This is not the computer that she previously connected to and she may not be able to get access to that computer. Is there a way for us to reset the password preferably without having to restore the ipod and lose everything she has on it?Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Maybe you are looking for
-
Error while upgrading EPBC Component
Hi all, I upgraded SAP NetWeaver 7.01 SP4 to SAP NetWeaver 7.01 SP5. All components upgraded but EPBC04_0-10005916.SCA failed to upgrade. There was error during depoloyment. Due to low physical memory in the hard drive where I have /usr/sap/trans/EPS
-
Canon Elura and Powershot no longer are recognized by 10.4.7
Looks like others are having this same problem, but there are no answers to the previous posts, so thought I'd add my problem to the queue. I'm pasting in the response I got from Canon when I emailed them. Apparently they recognize that the recent up
-
Need help with LikeFilter for querying the keyset instead of value
Hi, I'm looking for help with the LikeFilter. I need to query the cache to get all entries with key starting with a particular string. I could see samples using LikeFilter for querying the values in the cache but not the keyset. Can someone help? E.g
-
Solution Manager 3.2 confirming open alerts
We are at the latest support pack levels as of September 2006 running Solution Manager 3.2. When confirming open alerts on non abap systems within the solution_manager transaction we get a cpic error 002 return code 679 and the alerts all go grey. In
-
Problem After writing the Jfree chart into pdf
Hi All, I am writing the Jfreechart object with my company logo into JSP and and setting the content type as "application/pdf". I am getting the error as java.lang.IllegalStateException: getOutputStream() has already been called for this response. I