HT201401 I have some troubles with my iphone, in the screen just appear de usb wire and de
I have problems with the iphone 4s, in the screen just appear itunes logo and a part of usb wire
your phone is in recovery mode. You must connect your iPhone to your computer and restore using iTunes.
Similar Messages
-
Hi! I have some troubles with my iphone 4...
Hi! I have some troubles with my iphone 4 since a few months. Sometimes, suddenly, it pretends to discharge very fast, but when it comes to 1% I can still use it for hours. Also, when I recharge it, nothing would change at the 1%-note but the battery seems to be fully charged. The first and second time this happened, I made the mistake to turn the phone off because I thought a restart would solve the problem. But it made it worse: The Iphone wouldn't turn on again. I tried all the tricks with home + power button and also tried to connect it to itunes on my macbook, but nothing happend. When I connect the charger it shows me that the battery is empty (which isn't the case - I also tried different wires). After a few hours a little miracle occured and the **** thing turned on all by itself and pretended as if nothing happened.
The third time this happend I didn't turn the phone off and just used it normally. I took care that the battery is always full and after a few days it was normal again.
Now it happened again but I had no wire with me at work and the battery ran low and the phone turned off. Now I'm trying to "reanimate" it for 2 days now...nothing. The last times it took 3hours to 12 hours until it would awake but now...
Does anyone know this problem and knows how to solve it? As I said, I already tried the "press the home button and powerbutton and both and whatever" tricks for a few times but it doesn't change anything....
Cheers,
DianaBuzz! Thank you for playing!
You're out of luck. At least here. Discussing jailbroken devices is forbidden by the terms of service.
It's likely the jailbreak has permanently hosed it. -
I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!
Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
Read:
http://www.apple.com/support/iphone/assistant/restore/ -
I have some troubles with my Iphone
I bought this iphone, and it's locked, I can't contact the previous owner, I have everything to prove that it's my new purchased phone, can you please remove a device from a previous owner's Apple ID. Help me please with my problem
Del8or wrote:
I can't contact with the previous owner
Then you're out of luck. The phone is useless to you. -
I have some trouble with Safari!
Everytime i google something, I expect safari to open the link i click in the same window and same tab - as it did before - but now it always opens a new tab! I'm getting really tired of that! So please help me! I want safari to open the google search link in the same window and tab! How to fix that?
Please help me!!!
Thank you!From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit. -
In fact this happens on some computers. the graph XY causes some trouble when zooming. Sometimes, when I run my main program and open the window with the graph, it has change the displayed it overflows to the edge of the windows. Or somtimes it works but if I zoom the curves disappeared, or is corrupted.
I have this for instance on a computer with win 98 and a ATI graphic board. So I try to update all drivers but noting has changed. I try to decrease the hardware acceleration, and it seems to happen less oftenly.
Does anybody have seen that kind of trouble ?> I have some trouble With the graph XY, if I display a curve and try to
> zoom on it, it may be corrupted, or may disappeared.
>
I think what you are describing is not due to video driver, but rather
to the way the graph works. The LV graph maps points to integer screen
coordinates and draws lines be tween those point. When the numbers are
way to large to fit on the screen, the numbers are pinned to a special
large value. When this happenson one axis but not the other, it causes
the slope of the line to change and potentially not cross the screen.
If this is the same effect I'm describing, it only takes place when you
zoom into the data by a large extent, pushing the other points about ten
to fifteen monitors away. At this point you are no longer
looking at
measured data, but rather just on the interpolation of a line between
two points. The solution if you must have one is to resample your data
on the diagram to contain more points.
Greg McKaskle -
With the latest update, i have some trouble with youtube. Every videos that i watch are shaking. Is there something to fix it?
Instantly worked, found this on other thread!!
1. System Preferences > Flash Player > Advanced > Delete All
Press the "Delete All" button
2. Safari > Preferences > Privacy
Press the button “ Remove All Website Data”.
*Dont forget to restart Safari -
hello to everyone, I have a problem with my iPhone 5, the dynimic doesn't work... I didn't drop it and didn't contact with water...
so what should I do? please help me =(
P.S. may be I wrote with some mistakes, so I apologyze for itHello darkhanfromaktobe,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Have a nice day,
Mario -
I have some error with my iphone 5 in black screen nothing shown
i have some error with my iphone 5 in black screen nothing shown nothing do no restart and when i have restore my iphone it say error 4014????????????
is this the original iPhone 5, or 5s? If it's the 5s do you have Apple Care still? If so calling Apple iPhone support is where to start, hopefully they can help, if not, setting up an appointment at the Genius Bar at an apple retail store is a good option too, Call the store first though and ask what your options are in terms of warranty and service. If you are having problems with the regular iPhone 5, still call Apple Care or an Apple store and see what they can do.
good luck!
K? -
I have some problems with my iPhone. Can i change my iphone from USA (ME495LL/A) in Germany? Warranty is ok till october 2014
No you cannot. The iPhone warranty is only good in the country of purchase. You would need to bring it back to the US, or send it to someone that could take it to an Apple store in the US. Apple will not accept international shipments.
-
good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
I have a problem with my iphone 4,the problem is hanging and turning off automatically, it was started when I updated it to ios7.0.2, what should I do?
mahtab2 wrote:
I have a problem with my iphone 4,the problem is hanging and turning off automatically, it was started when I updated it to ios7.0.2, what should I do?
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
While browsing the internet with my iPhone 4S the screen goes black and it looks like it's turning off, but it pops up to the unlock keypad screen. It has plenty battery and I was wondering if it is an issue of using too much of the iPhones RAM or not. I have no other apps open besides Messages. I am getting kind of worried as it started around two weeks ago and it has gotten increasingly frequent.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these steps in order until the issue is resolved.
-
I have had trouble with my iphone 4 since latest update. It will not turn on after charging.
I am having trouble with my iPhone 4 since latest upgrade. It will turn off during charge and can only be turned back on by restoring it with itunes. Is there anything I can do to fix this problem?
sadly most likely u have to buy a new battery unless u didint update ur ios cause people on ios 4 are having problems like that
-
I have some problems with my iphone
hi, im yaman from syria aleppo and i have a problems with my iphone and i need to talk with an expert and this is my e-mail: [email protected]
please answer quicklyhi again, and sorry for leaving my e-mail
and my problems is :
1.frozen screen.
2.then the volume begins to geting low.
3.my iphone does not find any wi-fi network since the last software.
and thanx very much
Maybe you are looking for
-
Hi, I have a log file and this log file should be deleted when user clicks on a menu option. Intially this file is opened using buffered reader as follows BufferedReader in=new BufferedReader(new FileReader(logFilePath)) log file is read and some log
-
[newbie Q]What am I doing wrong...
I'm totally a newbie to Oracle and pro*C. It's my first 3rd day of working on Oracle, and Pro*C precompiler and pl/sql concept looks very obscure to me. (Although I'm rather familiar to RDBMS jobs.) I've added "sqlcheck=full" option to compiler and b
-
Media Manager not Recognized in 4.7
I just got my Curver 8319 about a week ago. I don't have micro sd card yet. So I'm trying to get the pictures that are on my 8310 from it to my computer. I installed the software from the site because I can't find my disc that came with it, and th
-
How to connect Webi Report into SAP Portal?
Dear Gurus, i would like to connect Webi Report into SAP Portal. Could you please give me the steps to follow to acheive that requirement or send me some documents? Thanks
-
When I open an image to edit it in Elements 10 editor, the software crashes with the first edit action attemped on the image. No matter which tool or dialog box I select, the mousepoint goes to eyedropper, the drop down menus are grayed out, and no o