HT201401 Incomming calls always on speaker phone mode. How do I change to normal phone mode?

When answering phone for incomming calls, the phone is always in speaker phone mode. How do I return the phone to normal phone mode?

Check Settings>General>Accessibility>Incoming Calls (in the Physical & Motor section). Make sure this is set to Default.

Similar Messages

My iPhone 4 won't take incoming calls. Everytime someone phones me it goes straight to voice mail. What's gone wrong?

For some reason my iPhone 4 won't take incoming calls and everytime someone phones me it goes straight to voicemail what's gone wrong??

Look at the AT&T VVM User Guide for help setting up your visual voice mail.
If you still have problems, contact AT&T Customer Service at 1-800-331-0500 and ask them to check that your account is provisioned for an iPhone 4.

Please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

Personal rant, why do people write the entire problem in topic line
It's not possible with Windows Phone 8. What's the point, a call is coming in and the phone allows you to answer.

I can't put call on hold to answer incomming call, always hangs up on first call

I can't put call on hold to answer incomming call, always hangs up on first call

The procedure is different, depending on whether your carrier uses CDMA or GSM. Consult the manual. gdgmacguy gives directions on how to find it in the post above.
Best of luck.

My iphone battery level more than 50% but if any incoming call or message, my phone going off. How can i repair my battery?

My iphone battery level more than 50% but if any incoming call or message, my phone going off. How can i repair my battery?

i Had a simular issue years ago with my blackberry on ATT. As it turned out, my SIM had some issues. I would head over to your carrier and get a free sim replacement. It could be a phone or SW issue, but the Sim is my first guess give my experience

I accidently bought a book in the wrong language, swedish, I dont speak swedish. How can I change it to English?

I accidently bought a book in the wrong language, swedish, I dont speak swedish. How can I change it to English?

Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that book, click the arrow to the left of it, click the 'Report a Problem' button :
and then the 'Report a Problem' link on its line :
and select 'inadvertently purchased' as the problem and fill in the details (iTunes support should reply within, I think, about 24 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes, which it is currently doing for me) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption.

HT201401 Incoming calls do not ring on iPhone, only vibrate. All settings are selected for ringtone to be audible, I have restarted phone, went back to factory settings, still no sound on incoming calls.

Incoming calls are not heard, only vibrate. I have reset the phone back to factory settings and still do not get any ring tone sounds for any incoming calls. The phone only vibrates. I have checked all setting including volume and do not get any sounds from the phone on incoming calls.

Check the Mute / Silent Switch on the side of the phone...
iPhone User Guide

No audio during phone calls unless using speaker phone or headset

My husband switched to the Galaxy Nexus a few days ago. All went well until he tried to make a phone call. The audio occasionallyworks both ways during a phone call, but more often it doesn't work at all (either way) or cuts out in the middle of the call. We have tried booting in safe mode to rule out interference from other apps, but the problem persisted. When the audio isn't working, all other sound on the phone works fine. It's only when placing a phone call without speaker phone or headset. There is no sound at all - no ringing, no dial tone, nothing in either direction. I installed a sound manager app last night and all was well until this morning. He did plug in earbuds this morning, and the audio problem returned after he unplugged them. I'm not sure whether the earbuds are contributing to the problem, but I thought I'd mention it. He uses them a lot. Any ideas?

Same problem here. My phone worked great for a week then this problem occurred. After searching XDA Developers, one of the members there came up with an app.
https://play.google.com/store/apps/details?id=com.woodslink.android.wiredheadphoneroutingfix
Not a perfect solution, but does work. I have Emailed with the developer and has helped with any issues that pop up. I suggest the paid version, small price to pay but worth it to make the phone work again.
It would be nice if Verizon/Google actually cared about this issue.

Incoming calls always "Unknown" ?

I just recently switched to Droid Razr Maxx HD. Everything works fine but all incoming calls have neither name nor number. They always come in as "Unknown" even when they are in my contacts. Especially family & friends are NOT ID blocked on their end. I checked all the settings and everything seems to be set the way it should be. Can anyone help, please?

Quite an interesting situation you have going on here, Montill. I'm commited to helping you find a solution. Thanks to B33 for your input. I reviewed the options on your device, but I was unable to locate any option to turn caller ID on or off. I was going to suggest that you ensure that your contracts' numbers are saved into the phone correctly. For example: If your calls come from a ten digit number (xxx-xxx-xxxx), but you have the contact saved as seven digit number (xxx-xxxx) the caller ID on your device may not recognize the number.
It's also possible that the caller ID feature is not on your account. Once you've confirmed how your numbers are saved into your device, let me know if you would like for me to review your account. Follow me, send a PM (private message) and provide me with your wireless number. Have a great day.
ChaunceyM_VZW
Follow us on twitter @VZWSupport

PAP-2T, make incoming calls ring in both phones/Lines?

I have a PAP-2T. On this device I have connected two different phones, one connected to Line 1 and the other to Line 2. I have one SIP account with my provider. My provider has configured my account so that I can make two concurrent outgoing calls. My Lines are configured as the following;
Line 1:
Proxy: xxxx.sipserver.xxxx.xx
Outbound Proxy: <blank>
Register: Yes
Register Expires: 3600
Use Outbound Proxy: No
Use OB Proxy In Dialog: No
Make Call Without Reg: No
Ans Call Without Reg: No
Line 2:
Proxy: <blank>
Outbound Proxy: xxxx.sipserver.xxxx.xx
Register: No
Register Expires: 3600
Use Outbound Proxy: Yes
Use OB Proxy In Dialog: Yes
Make Call Without Reg: Yes
Ans Call Without Reg: No
Now, when I receive an incoming call, the phone connected to Line 1 rings. If I configure Line 2 like this,, Ans Call Without Reg: Yes,, the phone on Line 2 rings but not the one on Line 1.
My question is,, can I make both phones ring when I receive an incoming call?
If so, how do I configure the ATA to make that happen?

Cat2k1 what kind of probs do you hve with your phones ?
- assume it's a DECT phone, try to change the ring voltage to 75V and ring waveform to trapezoid - this works better with problematic DECT phones
- assume you're having an old analog phones, make sure the PAP2T's Line1 socket is only connected via 2wire interconnect cable (4wire cable on Line1 plus certain analog phones is a trouble-maker)
- assume you use multiple analog phones on one line, you may consider increase the FXS power from 3 to let's say 5
- assume you're having an old analog phone, it's ability to ring (if all the SIP comm works OK) is also affected by the FXS port impedance which must (shall) fit the phone's one.
====
On the other hand, shall you have problems with SIP communication between PAP2T an SIP operator, you shall enable NAT traversal and NAT keeplalive for the first on PAP2T settings
Message Edited by Scorpio-cz on 12-24-2008 10:50 PM

MD Now Requires Hands-Free Calling--Best Bluetooth Speaker Phone for iP4

It's a good thing that, as of today, Maryland requires hands-free phone usage in vehicles, but I am in a rental car at the moment (possibly because of someone else's irresponsible cell phone usage--and I don't know how long), so I am looking for a portable bluetooth hands-free speaker phone that actually works with my iPhone 4 with IOS 4.1. I have had many people tell me lately that I sound terrible when calling from my car using my Parrot Mki9200.
So, what works best now with the iPhone 4 with IOS 4.1 that I can use in my rental and possibly later in my real car.
Thanks in advance for any useful information,
Lambanlaa

Thanks, Randy, but I don't want that to be a part of the equation of a traffic violation, if I should have one. Will you hold the phone up to your ear now that the law is in effect? If not, what car solution do you use with your iPhone 4?
Lambanlaa

IPhone IOS 7.1 incoming call picture size now small. How can I get it to fill the screen like before?

Just had the upgrade to IOS 7.1 and now with an incoming call, the associated picture is just a thumbnail, instead of filling the screen. Anyone know how to change this? I tried specifically associating a picture on my phone with a contact and trying it, but still was a thumbnail.

This change that Apple made is disconcerting. It shows that whomever is now in-charge of these decisions at Apple doesn't have what it takes. There's something seriously missing with this decision and the change to less usability is incredibly misguided. Who wants their contacts to appear in a little cartoon-like round bubble and the incoming caller can't easily be recognized?? As someone who has used a Mac since 1984, there's something seriously wrong with their design guidance. Apple likes to create products that "delight" and this doesn't.

HT5463 my incoming calls will not ring when locked. how do I get rid of the lock screen and passcode for good?

I have mu phone set up on locked screen and passcode. I want to take this off. I am unable to receive calls in locked screen.
I need to hear all my incoming calls.

Double check settings - do not disturb - is off.

TS4079 Siri call me by the name. How can I change that?

Yes how can I change the name Siri calls me?

Activate Siri by pressing and holding the Home button, then say, "Siri, call me _______" and tell Siri how you would like to be addressed.

Web links always print up blank. How do I change this?

- When printing documents the web links are always blank. How can I change this?

Hey. Could you post a little more information about your setup? Here is a quick list that should allow us to troubleshoot the issue.
What printer your using?
What operating system your using?
How is the printer connected to the computer (wired or wirelessly)?
What application are you printing from?
Thanks!
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HT201401 Incomming calls always on speaker phone mode. How do I change to normal phone mode?

Similar Messages

Maybe you are looking for