HT201401 Need help to enable my 3g iPhone which has been disabled due to forgotten passcode

HI....Need help to enable my3G iPhone which has been disabled due to forgotten passcode.Thank you

If you forgot your passcode, restore the phone on the last computer it was synced with. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode and restore as a new device.  See http://support.apple.com/kb/HT1212.

Similar Messages

  • How to get in to my iphone once it has been disable due to forgotten passcode thanks

    how to get in to my iphone4s  after it got disable due to forgotten passcode thanks

    easy
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • TS2446 My iphone 5s has been disabled do to forgotten pin #. How do I enable the phone

    I have a company IPhone5s. In working with my settings i inadvertantly assigned a new pin and then forgot what is is. I tried a few times to access my phone with what i thought was the correct pin, but after trying several times my phone became disabled. How do i enable the phone again

    iOS: Forgotten passcode or device disabled after entering wrong ...

  • HT1212 restoring an iphone tht has been disabled without itunes

    How do i restore an iphone that has been disabled due to too many passcode attempts. Phone never synced to itunes. Already tried restoring but it said an unknown error occurred and stopped. What can i do to get it working again?

    This relates to error 9006.
    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, and 9006
    Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • HT1212 I have an iphone 3 which has been disabled, I've put it into recovery mode but itunes won't connect to it. I know the password but the device wn't give me the option to add it. What else can I do to enable the device. I can't wipe it from the cloud

    I have an iphone 3G which has been disabled after a child tried to get into it. Itunes will not connect until I have put the passcode in but the device will only enable emergency calls and does not allow a passcode to be put in. I have put it into recovery mode and itunes can't see it. There is currently no SIM card in it and it's not connectng to the wifi so I can't wipe it from the cloud. Any ideas how I can get into it?

    iPhones require a SIM for activation.
    Put the device in DFU mode (google it) and restore via iTunes.

  • Need help in laoding flat file data, which has \r at the end of a string

    Hi There,
    Need help in loading flat file data, which has \r at the end of a string.
    I have a flat file with three columns. In the data, at the end of second column it has \r. So because of this the control is going to the beginning of next line. And the rest of the line is loading into the next line.
    Can someone pls help me to remove escape character \r from the data?
    thanks,
    rag

    Have you looked into the sed linux command? here are some details:
    When working with txt files or with the shell in general it is sometimes necessary to replace certain chars in existing files. In that cases sed can come in handy:
    1     sed -i 's/foo/bar/g' FILENAME
    The -i option makes sure that the changes are saved in the new file – in case you are not sure that sed will work as you expect it you should use it without the option but provide an output filename. The s is for search, the foo is the pattern you are searching the file for, bar is the replacement string and the g flag makes sure that all hits on each line are replaced, not just the first one.
    If you have to replace special characters like a dot or a comma, they have to be entered with a backslash to make clear that you mean the chars, not some control command:
    1     sed -i 's/./,/g' *txt
    Sed should be available on every standard installation of any distribution. At lesat on Fedora it is even required by core system parts like udev.
    If this helps, mark as correct or helpful.

  • HT201401 My iphone 4 has been disabled because I cannot remember the passcode. What can I do?

    My iPhone 4 has been disabled because I cannot remember the passcode. I plug my phone into the computer but it does not bring me to a place where I can restore.

    Follow the directions here to force the phone into recovery mode & restore it:
    http://support.apple.com/kb/ht1212

  • TS1424 How To Enable My Apple ID it has been Disabled

    I need help accessing I have tried everything to enable my. Apple It has been disabled, I've tried resseting my pass, logging in and out also contacted iTunes via email and phone but they cant help me!! Help please

    You need to contact itunes support.
    http://www.apple.com/support/contact/
    There is NO telephone support for itunes.  Use the link above.

  • HT4061 Hi have iphone 4 has been disabled says to connect to itunes when I do that it says enter passcode on phone but it won't let me any ideas

    Hi have iphone 4 has been disabled says to connect to itunes when I do that it says enter passcode on phone but phone won't let me do that

    Hey drcajkm,
    Thanks for the question. The following article provides some solutions if you are having issues with passcode lock:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the Connect to iTunes screen.
    5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    Thanks,
    Matt M.

  • I have enlarged icons on the log in screen and can not enter my login code. I have tried enough times that I am locked out and my iphone 5 has been disabled.How do I fix this??

    I have enlarged icons on the log in screen and can not enter my login code. I have tried enough times that I am locked out and my iphone 5 has been disabled.How do I fix this??

    Hey there byambar,
    Welcome to Apple Support Communities.
    It sounds like you’re describing two issues, the first issue is related to the Zoom accessibility feature and the second issue is related to the device being disabled.
    Take a look at the article linked below to learn more about Zoom and the other accessibility features on your iPhone 5.
    Use Accessibility features in iOS - Apple Support
    This article will help you resolve the issue with your iPhone being disabled.
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Take care,
    -Jason

  • My Apple ID has been disabled due to changing the credit card, how can I enable it again?

    My Apple ID has been disabled due to changing the credit card, how can I enable it again?

    you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    You might then need to log out of your account on any iOS devices that you have by tapping on your id in Settings > iTunes & App Store (Settings > Store on iOS 5 and below) and then log back in so as to 'refresh' the account on them
    If that doesn't fix it then contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • HT4623 my ipad has been disabled due to entering wromh password. how do i enable it again? Thanks and Regards

    my ipad has been disabled due to entering wromh password. how do i enable it again? Thanks and Regards

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Pay particular attention to Steps 3 and 4.
    Some users have reported as many as 8 or 9 attempts were necessary before success
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • My iPhone 4s has been blocked due to forgetting my password, I can't remember my email or password to unblock my phone. If I went to the apple store and took some kind of ID or phone bill for proof would they be able to unblock my phone

    My iPhone 4s has been blocked due to forgetting my password, I can't remember my email or password to unblock my phone. If I went to the apple store and took some kind of ID or phone bill for proof would they be able to unblock my phone? Please help

    Jmartin31 wrote:
    My iPhone 4s has been blocked due to forgetting my password, I can't remember my email or password to unblock my phone. If I went to the apple store and took some kind of ID or phone bill for proof would they be able to unblock my phone?
    No.
    See this -> iOS: Forgot passcode or device disabled

  • HT201363 my ipad has been disabled due to one of my household trying the 4 digit pin to unlock it ..they obviously got it wrong..i have plugged ipad into myitunes on my laptop and it is still disabled..how do i re enable it ?

    my ipad mini has been disabled due to one of my household trying the 4 digit pin to unlock it..they obviously got it wrong...i have plugged into my itunes as requested on screen into my laptop but it is still disabled ..what do i do to unlock and re enable??

    Hey ade17768,
    Thanks for the question. The following resource outlines what to do if your device is disabled:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    If you have previously synced your device with iTunes, you may be able to reset the passcode by restoring the device:
    1. Connect the device to the computer with which you normally sync and open iTunes.
    Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
    2. If the device is still disabled, or if iTunes does not automatically sync your device, sync the device with iTunes.
    3. When the backup and sync is complete, restore your device.
    4. When iOS Setup Assistant asks to set up your device, choose "Restore from iTunes backup".
    5. Select your device in iTunes and choose the most recent backup of your device.
    Thanks,
    Matt M.

  • HT5581 my iphone 3gs has been disabled

    My iphone has been disabled and i cant access to insert the passcode to unlock my iphone.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

Maybe you are looking for

  • I reinstalled photoshop elements 6 to my computer and now it won't let me register it. How do I fix this?

        I had to uninstall and reinstall Photoshop elements 6 to my Windows 7 computer because the brushes were glitching on me, and now it won't accept my serial number to register it to my computer. I received it from a bundle package when I installed

  • Regarding absence of notification workflow

    hi all experts,       i have a issue on workflow. suppose sender leaves a approval.now recipient decide whether he will approve it or not...absence of notification workflow.now i have to do that if recipient's absence reach beyond 5days,approval will

  • Confused about Acrobat 9 and CS5

    Hi... I recently upgraded from CS4 (Design Premium) to CS5. No problem. However, I am not sure what to do about the separate Acrobat 9 installation disk. In the CS5 instructions, it says that old versions of Acrobat have to be removed before installi

  • Run a procedure based on a schedule

    hi dear; how can i schedule to run a process in specific time or every one interval of time? regards;

  • Wait for InvokeProcess return values

    Hi, I am executing powershell script using InvokeProcess activity. This script has some MSBuild activity like compiling visual studio solution and creating installer. This will take some time. I am invoking  like below from PowerShell script. $msbuil