HT201401 The clock on my iPhone 5C is not updating the time

The clock on my iPhone 5C is not updating the time unless the phone is totally turned off and rebooted, or the airplane mode is turned on for a few seconds and then turned off.  A "reset" and a full "erase all..." did not help. Any ideas?

Time comes from the cell tower.
Check Settings > General > Date & Time >
     Set Automatically: ON?
     Time Zone: your city?

Similar Messages

  • The apps on my iphone 4s does not show the x while wiggling. How do i delete an app?

    The apps on my iphone 4s does not show the x while wiggling. How do i delete an app?

    Check your restrictions.
    Note that default apps cannot be deleted and thus will not have an x.

  • Do i need to install the iTunes in my iPhone and backup before update the software version?

    do i need to install the iTunes in my iPhone and backup before update the software version?

    No itunes on your computer.

  • The touch on my iphone 3gs does not work. the only time it works is when i slide it to turn it off. I've tried resetting it multiple times and it will still not work. I need help!

    Hello, I've got a question about my Iphone 3gs. Well one day i woke up and i tried to slide to unlock my phone but the touch was unresponsive. So, i turned off my phone and back on, the unlock screen came back one and same problem happened. The only time the touch works is when I slide to turn off my phone. When people call me, i can't answer. When people text me, I can't answer. I do have the latest update for the phone. I've looked everywhere on the internet and have got no answers. I have dropped my phone a couple of times and it does have some cracks on the screen. Please help!

    Your only chance besides getting it serviced would be setting it up as new device:
    http://support.apple.com/kb/HT4137

  • I had to get a new apple ID for my Iphone and delte the old account,but now i can not update the apps I had installed from my old Iphone and could I transfer the music albums I bought to this new apple account as well ?

    could you please get back to me as soon as possible , there is an update I have been anticipating for a about two months now and it  is coming very soon.

    This is a user to user forum; there is no one from Apple here to get back to you. Apps and music are forever associated with the Apple ID  account they were purchased with. There is no way to transfer them to a different account. That is why Apple lets you change the email address associated with your account without having to get a new account. If you didn't do this, but instead got a completely new account, you are out of luck. You can still go back to the old account and just get a new email address for it.

  • The "return" button under the screen of my iPhone 4 does not close the apps

    I have to push on it several ans several times before something happens.
    Is someone able to help me fix this issue please?
    Thx in advance

    Ah, you mean the Home button. If you're having a hardware issue, you should take the phone to Apple and have them look at it.

  • My iPhone 5 will not update iOS 7.0.6 what do I do?

    My iPhone 5 will not update the iOS 7.0.6 !  I'm plugged in, & have wifi. Any suggestions? Thanks!!

    iOS- Unable to update or restore
    Resolve iOS update and restore errors in iTunes
    Have you tried connecting to your computer and updating via iTunes?
    You may have to do a full restore to upgrade:
    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • BAPI_PO_CHANGE to update the Price for the line item not updating the Price

    Hi,
    I am using BAPI_PO_CHANGE to update the Price for the line item. This BAPI is not updating the Price. I am using external cummit also, but the BAPI is not updating price.
    I am passing following data to the BAPI.
    Plant: CQ11
    PO                   Material                Price
    4500002142     TEST_BATCH     12
    Please provide suggestion.
    Regards,
    Jubin.

    Hi,
    check this link...this has sample code
    [http://www.sap-img.com/abap/sample-abap-code-on-bapi-po-change.htm]
    Regards,
    Surinder

  • Error ''windows could not update the computer's boot configuration"

    i have an Hp pavilion dv 6 -3045 product wr747ea#abe ,till now i installed windows 7 on it several times but this time after i formated the partition and started the instalation from usb at completing the installation a message popup ''windows could
    not update the computer's boot configuration''.Also i tried with another copy of windows 7 also booted from usb but i get same message at same step. I used a memory stick and bootable windows 7 from usb with Rufus program.
    Please any sugestions ?

    Hi,
    Please make sure you have format the system drive and perform a clean install, not just override or upgrade from the previous system.
    The bootloaders for Windows Vista and Windows 7 are quite similar,  you could have a look at this article and see if it's helpful to you: 
    When I try to upgrade an earlier version of Windows to Windows Vista, I receive an error message: "Windows could not update the computer's boot configuration"
    http://support2.microsoft.com/kb/931697
    Karen Hu
    TechNet Community Support

  • The clock on my iphone goes to slow.

    The clock on my iphone goes to slow. When i reset it, it only takes 10 minutes and its 5 minuets behing again.

    i have the same problem. What is going on

  • The first boot of iphone 5 is not possible due to lack of battery charge , it happened after charging, is there s any issue of battery life

    the first boot of iphone 5 is not possible due to lack of battery charge , it happened after charging, is there s any issue of battery life

    Charge the phone for 15 minutes with the Apple charger. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears.

  • For the 2nd day my iPhone 5 will not let me download updates for apps.  When i click update, it acts as if it is going to update but puts all apps in "waiting" status.  I've tried selecting each, as well as deleting and re-downloading but to no avail.

    For the 2nd day my iPhone 5 will not let me download updates for apps.  I've tried selecting each to click off wait, and have selected new updates indvidually instead of all together.  Also have shut the phone down and have even deleting the apps completely and re-downloaded but to no avail.  Each app continues to sit on my screen with the line below as if it is about to download but never does, and now any apps I've tried to updated will not let me use them.

    Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
    First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
    Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
    When I went back to my phone and tried installing them again (still on my computer), it worked!
    I hope this helps, because it was incredibly frustrating. Good luck!

  • HT203421 i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this

    i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

  • My iphone 4 isn not responding the screen is just showing a usb lead and the itunes symbol. When i plug it into my desktop mac and link it to itunes ,itunes is telling me the phone is in a restore mode .can i get it to respond without restoring ?

    my iphone 4 is not responding the screen is just showing a usb lead and the itunes symbol. when i plug it into my desktop mac and try to sync it to itunes ,itunes is telling me the phone is in a restore mode. How do i get it to respond without restoring the phone to new ? there is no option to restore with backup as i have not backed up any of the data on the phone any help would be greatly appreciated thanks

    http://support.apple.com/kb/HT1808
    You can't  not restore if you have reached this point

  • HT1296 Can't get my Music off of my iPhone 4. My computer died & had to get a new one, so now I cannot sync my iPhone 4 with the new computer, without losing all of my Music, because the only Music I have is on the iPhone 4 only, not on the computer. Help

    Can't get my Music off of my iPhone 4...
    My computer died & had to get a new one, so now I cannot sync my iPhone 4 with the new computer, without losing all of my Music, because the only Music I have is on the iPhone 4 only, not on the computer. No Backup anywhere : (
    If I choose to sync it tells me all of the Content that does not match the iTunes library on the computer will be erased, do you want to proceed & I have to say no.
    How do I replace the music library on my Computer with the Music on the iPhone?
    I got my pictures off because you can access them when you connect the iPhone using Windows 7 but you cannot see any of the music so you cannot access it when using windows so don't know what to do...
    Help...

    The music sync is one way - computer to iphone.  The only exception is itunes purchases.  File>Transfer Purchases
    It has always been very basic to always maintain a backup copy of your computer for just such an occasion.  Use your backup copy to move everything to your new computer.

Maybe you are looking for

  • Deploy Adapter-Module PI 7.1 with NWDS 7.1 to server?

    Hey, i am developed a adapter-module for PI 7.0 now i am upgrading the module to PI 7.1. I got the NWDS, all libs and build all Projects like it was described in a SAP Help skript. I created a new Project, added the EJB module, adjusted the decriptor

  • Short close PO doesnt open contract

    Hi, I have created a PO of 100 USD  from a Contract of target value 1000 USD. I tried to short close a PO setting the delvery completed indicator AFter GR is created for 50 USD.Then this should make contract net value to 50USD.But in my case its not

  • How do you change the look of a generic folder?

    Hi people, I have numerous folders I have created and they all look the same. The generic new folder look. Is there any way to customize the folders, with pictures I might have? For example, if I had a generic looking folder labelled 'music', could I

  • Wonderware and OPC; reading arrays ?

    I have a contact on a project that says Wonderware is not able to read OPC data (Shared Variables) from LabVIEW in the form of arrays of double, all data must be single values. Can anybody confirm this statement, or tell me otherwise ? I find it stra

  • ALV development in SAP 4.5

    Hi Has anyone done any development on ALV interactive report on SAP version 4.5? Possible to provide me pointer. The interactive ALV report include checkbox to perform certain task once the save button is clicked.