HT201401 When I receive a call my ring tone only sounds 40 seconds or less and then stops and disconnects the call. What can I do to solve this problem?. I lost a lot of calls because of that.
When I receive a call my ring tone only sounds 40 seconds or less and then stops and disconnects the call. What can I do to solve this problem?. I lost a lot of calls because of that.
Ring duration & voicemail are all controlled by your carrier. Your issue seems to be voicemail...doesn't appear to be setup on your phone. I'm not aware of any carrier that permits a cell phone to ring longer than 30 ~ 40 seconds, so that appears to be normal. Contact your carrier as it looks like your issue is voicemail.
Similar Messages
-
Since updating my iPad mini I have been unable to send or receive messages. My iPad only wants to recognize contacts with apple products but still won't deliver a message to them. What can I do to solve this problem?
Try restarting the device first..
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
Then press and hold the Sleep/Wake button until the Apple logo appears.
If that doesn't help, try here > iOS: Troubleshooting Messages -
My phone is not receiving emails, what can I do to solve this problem?
Hello Everyone
Can someone help me solve this problem? My phone is not receiving emails. I have two accounts set up, my work and my personal emails; neither one is receiving any mail. What can I do to fix it?
ThanksI purchased this phone in December of 2010. It has worked perfecty since then. I recently deleted a GMail account that I was not using a couple of weeks ago. Since this morning my phone has not received any emails. I have just deleted both of my email accounts and will attempt to set them up as new accounts to see if this will rectify the problem. Any suggestions are welcomed.
Thanks -
the start up takes over 10min but after it starts up it works ok until i fix a usb to it then it starts to freeze every 2min. what can i do? please help me out. Thanks
Thanks for your response.
I have tried creating a new account but it didn't fix the problelm.
How do i safe boot?
when you say "safe booting" do you mean restarting/shutdown and restart? because i restarted my macbook air while holding down the shift key while it was starting up but there was not luck either, the problem was still there when i restarted it again. -
For about 2 weeks thats starts to happening.. I dont know what it is but i want to fix it!
had someone the same problem?It will not let me do that. It says insstalling when I try that.
-
At first my pages was working fine after I installed it, but just recently it won't let me print, save or export my documents. I went back to the aaplication store and it shows that pages has been installed. I have no idea what to do next.
You need to totally delete the demo version files then reinstall your registered version.
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=105&mforum=iworktips ntrick
Peter -
I don't know when this started but I can't seem to remedy it. I've updated several times but have not uninstall/reinstalled FF. I'd like to do that only if I have to because I'd like to keep my saved info if possible. I'm not computer illiterate but I'm not a tech either so I need fairly basic instructions if it's at all possible.
This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
My FaceTime won't connect. Every time I try to call my friend it says connecting. Then unable to connect. Or lost connection. And when I go to our FaceTime history it said "FaceTime answered on another device." What can I do to fix this problem? We always used to FaceTime. And now all of the suddenly we can't.
Apple has released a document which is reported to address the recent FaceTime issue.
http://support.apple.com/kb/TS5419 -
Hi I have a iPhone 4 and I seem to have a problem during calls. If I make or receive a call I can hear the person who is on the line with me but the other person can't hear me. This problem has occurred 1 week ago so please get back thank you
You use Restore to get the latest firmware build, not the Update button. You can only use the Update button, if there is an iOS update, say iOS 5.1.
this link talks about updating to 9A406 to fix the "No Service" issue with iPhone 4S:
http://iphone-and-i.blogspot.com/2011/12/fixing-iphone-4s-signal-problem.html -
When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-Tunes to play a single album and then stop, without continuing on through my entire library? It's a problem that doesn't occur when listening on my i-pod.
Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine -
hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you
hey Sally,
Can you elaborate on the ilab and what you are trying to do? I have found this page to explain error 404, but I am not sure if it directly applies to you
http://digital.ni.com/public.nsf/allkb/D0998D3734926FA08625782300016E40?OpenDocument
Regards,
A. Zaatari
National Instruments
Applications Engineer -
My iPhone 4S has no sound on alerts, music, only on calls and SMS, this happened after upgrading to IOS7. Can anyone help me solve this problem?
check and make sure that an alert style has been choosen for certain alerts, and make sure you check your sounds in settings
-
I had an appointment this morning with Apple to try and solve the problem with my lock button ranomly not working anymore and a few hours before my appointment with the Apple store i was using my phone and my screen randomly went black and stopped working. And the p.roblem now i cant use it. I tried restarting the phone but I can't restart it due to my lock button not working so i need help with a solution on what i can do. I missed my appointment today because i could no longer use my phone and i'm now stuck using my laptop. I did also try connecting it to my MacBook but the screen was still unresponsive and black. I rescheduled my appointment to Monday to see what is wrong with my button and screen but in the meanwhile i would like to know if there is anything i can do or if i would just have to wait until monday and take it in to Apple. Any help would be really appreciated as i am phonelss for now until i take it in to Apple in a few days. Thanks.
You wrote...
' What can I do to solve this'
What have you tried...?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New... -
My daughter has 2 websites she can not fully access because the iPad won't download updates for Adobe. What is Apple doing to solve this problem?
Flash has been used for more than just displaying videos. The Vote choice your daughter found is one of those flash type sites that will not display on iOS devices. There are now over 100 million iPads, and who knows how many more iPhones out there. Developers who want their content to display on all these devices will have to move away from the old Flash technology.
There were some version of Flash that ran on other brands of tablets. But Adobe has stopped all development of Flash for all mobile devices. As time goes on and mobile operating systems evolve the no Apple devices will lose their ability to run Flash too. Web developers need to move on to cleaner, more efficient types of programming. -
When I try to print a photo downloaded from Facebook in iPhoto, I can't get the size I specify to print correctly. Example: 5x7 prints smaller than 5x7. What do I do to solve this problem?
Those pixel dimemsions have aspect ratios that are not the same as a 5 x7 print:
1360 x 1360 = 1.0
790 x 640 = 1.23
2048 x 1366 = 1.5
An 7 x 5 image = 1.4.
So you'll need to crop the images to 5 x 7 before printing. The first two images are a little light in the pixels to produce a high resolution 5 x 7 print.
Happy Holidays
Maybe you are looking for
-
Logon failed when connecting to XML data source over HTTP
I am trying to create a report using the standard report creation wizard: 1) new, standard report 2) create new connection 3) xml and web services 4) xml data source When using the sample from the SAP site, it works fine: http://resources.businessobj
-
Hi all, I'd like to create an image of a graph with a data table below that contains the data displayed by the graph. I know this is possible as of SP 8 of IGS 6.40, but I can't find anywhere any documentation on how I can pass this on to the Chart
-
How to put gaussian blur in background of portrait in PSE 8
I have just spent four hours trying to blur the background of a portrait. Should be a simple task but something goes wrong. I make a duplicate layer, but when I try to gaussian blur the layer, it just goes to checkerboard. And the preview screen fo
-
Help sharing music on my Linkstation Pro
Hi all, I've got a problem sharing my music that I thought you may be able to help me with. I've got a Buffalo Linkstation Pro with all my music on. I've enabled Home Sharing in iTunes. Down the left hand side of the software I can see (under Shared)
-
Safari stucks when displaying flash
Hi I'm very new to Mac and did my first system update ever yesterday. But then I opened Safari and went to a website. I waited and saw the rainbow circle. I forced Safari to exit and tried to visit another website with Flash ads. Same situation. Well