HT201406 how do i fix my iphone that does not do anything

how do i fix my iphone that does not do anythig

With the very limited information you have given, I would try a reset - hold the power button and the home button until you see the apple logo then release. Or, restore as a new device in iTunes. What does and does not your phone do?

Similar Messages

HT201401 iphone display is stuck in landscape mode in messaging window? how do I fix? Turning phone does not work

iphone display is stuck in landscape mode in messaging window? how do I fix? Turning phone does not work

issue solved, i turned off phone and then on again and all is well

How can i fix my iPhone cus its not syncing all of my songs from iTunes

how can i fix my iPhone cus its not syncing all of my songs from iTunes

Assuming you haven't taken up too much memory from apps to hold the 11 gigs of music...
After you plug in your iPhone, go to the music tab. Make sure you have it set to sync all music.
If apps/books/etc. leave you with less than 11 gig of space for you music, make playlists and sync those instead

How do I fix Your hard disk does not have enough free space?

How do I fix Your hard disk does not have enough free space?

Select the icon of your startup volume ("Macintosh HD," unless you renamed it) in the sidebar of a Finder window, and open the Info window. How much space is Available? Specify gigabytes (GB) or megabytes (MB).

How can i fix my iphone 3gs, could not activate after restore

how can i fix my iphone 3gs, always appear, could not activate after restore

When you say activate what do you see?

How do I uninstall Firefox version that does not run on my Droid Eris?

I installed Firefox mobile on my HTC Droid Eris and then realized it does not work on this phone. How do I uninstall this when it does not even show up in my application downloads where I usually uninstall other apps?

Firefox should normally show up in the "Downloads" section of the Applications settings, like other apps. If it's not there, then there must have been a problem during installation. If it appears that Firefox is installed but is not listed in the settings, the only way I know to fix it is to do a "Factory reset" of all data on the phone. Sorry!

How to create an OAF page that does not need login to access

We have a lot of Oracle users, and everyday there are some users forget there username or password and need reset. I really want to use a web page to let them reset their passwords automatically. The web page will call the API to reset password if it found the user request is legible.
So based on the situation, the users should not need a login to get to this page, can I do this using OAF?
And idea is welcome, thank you for your help!
-Bill
Edited by: billzheng2004 on Jun 18, 2009 12:12 PM

Srini,
Thank you for your response, I think we need to go back to my original question, is it possible to create an OAF page that does not need login, how can I do that.
I think I said too much and led us to go to a different direction I did't want to. But I am still glad to texplain why I need a custom password reset process, that is all about business requirement, here it is:
----I am not sure that "company issues" (such as what you described) can be solved by software -
I already have a solution for that. Create a custom OAF page, ask user to input his SSN / Date of Birth.... then I can figure out what his real username easily. And I can reset his password as his SSN or something which only this particular user knows. Then he can login.
----you may have to impart training to end users.
As I mentioned, most of our users use only Benefit self service. They only login several times a year, even they are trained this year, most of them will forget next year, this is just human nature. And because the nature of our business, thousands of employees may change at the end of a year. It does not make any business sense for company to prepare trainers every year.
----In any case, the functionality you require is already built into the product.
I guess the reason most companies hire Oracle Developers is that some functionality Oracle Applications provide is not exactly the companies needed. When there is Oracle Apps product, there is alway customization.

How can I create a template that does not have automatic formatting but my own?

I have just switch to a Mac from a PC and am having a terrible time with pages. All I want to do is create my own template that has NO AUTOMATIC FORMATTING so I can do my own.
There is nothing in the HELP sections on how to delete the automatic formatting. I do not want to use any of their Outline Templates just make up my own.
I would be so so grateful if someone could help me with this. I took a one-on-one and his idea of how to get rid of formatting in my own template DID NOT WORK!
Thanks, Deborah

Deborah
Hard to see your problem, and if there is something THAT DOES NOT WORK! it would obviously be useful to know WHAT that is and WHY you believe it does not work, so we can ACTUALLY RECOMMEND A SOLUTION.
Just select any text and change it to whatever you want using the toolbar and/or the Text inspector.
The Outlines are just a view of your text, in a form that lets you easily organise and move it around.
Menu > View > Show Styles Drawer
Reveals whatever style has been applied to a heading or text and you can update or create new styles by clicking on the small triangle next to it > Redefine style from selection
When you are finished just save it as a Template.
Peter

IPhone 4 does not detect anything on Bluetooth

My iPhone 4 has appearantly a glitch in hardware...??? I turn on bluetooth and it can search for devices till the battery runs out and that's it. I don't think that this is a software error, as there are plenty of iP4's amongst my friends who don't experience this error with the same iOS version as I have.
ANything I can do about it, or I just have to return it to my seller and ask for repairs?
Tnx
Lauris

I can't pair it with anything, cause it just does not detect anything. Try to imagine... You go to settings--->bluetooth--->turn it ON and that is it! It starts the search and never finishes... The phone can search till the battery dies, but nothing. And I know that a friends iPhone can connect ot my cars bluetooth, but mine does not even find it. Finds nothing... NO apple gadgets, no other gadgets... It would be a success if it would find something and then the pairing would be a different issues, but if the search for a device never stops (not even to show that the iPhone can't find anything)...then I'm confused... and dissapointed..

How do you fix the sound that's not working on an iPad mini?

OK so the sound on it does not work. It's turned up all the way but nothing is still coming out. When I plug headphones into it, it works just fine and normal but without it, nothing. I looked up on google at the options of how to fix this and they pretty much all said to just turn it off and then back on. It also said to hold the power button until the swipe to turn off pops up and then to dismiss it. Plus one saying to hold both the home and power buttons down. I turned it off and then back on, as well as the other options but still nothing.
Am I doing these things wrong? Is there any other way that this can be fixed?

Give Nice Clock a look see.
NiceClock - The beautiful clock for iPhone and iPad (free version) by Michi Zurmühle
https://appsto.re/us/jjJeG.i

How do I fix a shortcut that is not working?

A common keyboard shortcut is not working. When I want to resize an image and keep the dimensions as I resize the image box up or down, I usually click one of the image box corners, hold down shift + command, and the dimensions of the box, along with the image inside resize in the same dimension. How can I fix this problem? Resetting the preferences folders did not work.

No, the constraint keys have not changed.
Check the system prefs to be sure the OS isn't using the shortcut, and also your web browsers.

How do I fix camera shutter that will not open?

Learning to work with the I Pad...newbie. Camera stopped working, I think shutter has frozen. How do I fix this?

Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

My safari browser is version 4.1.3 and started to crash often. How can I fix it so it does not crash anymore?.

Hello there,
I have G4 Ibook with the following specifications: serial number 4H5290VTS87 and upgraded to MacOSX TIGER. My Safari browser is version 4.1.3. Started to crash I do not know why. So far I got a new browser "TenFourFox" and is working great with no crashing at all but I would like to get back to Safari if I can because run everything faster and smoother.
I have tried the disk utility application to find out if my system needed to be repair something inside and is working good nothing needed to be repair, I even put the installation disk to run disk utility and it show me all is working fine but it did make the computer run faster for sure except safari browser keeps crashing so I quit safari and decided to find different browser until I find through you what I can do to fix it, if I can not fix it then I will continue with the new browser.
My impression so far is the operation system can not be upgraded more therefore this version of safari can not be upgrade either. Please let me know.
Fernando

You could get and use a browser built on a custom version of Mozilla code
that would run OK in OS X Tiger 10.4.11 as well as OS X Leopard 10.5.8;
however this one does not directly support Flash plugins, so web content
relying on that function will not work. Otherwise, if you get the version for
your series of processor (PowerPC G4 shows two versions in download)
that can do well enough for most casual browsing w/ some security.
•TenFourFox:
http://www.floodgap.com/software/tenfourfox/
Another browser that should be available for use in Tiger & Leopard, is
iCab; this will run freely but is shareware and a prompt will appear on a
re-occuring basis like a fade-in/fade-out image, asking you to buy it.
There are a few features in iCab that set it apart from others, it is OK.
•iCab - Internet Browser - Downloads: (for Tiger 10.4, note v. iCab 4.9)
http://www.icab.de/dl.php
If you contact the main Apple number, (800MYAPPLE) some users had
been able to ask for an operating system specialist, provide a serial
number for their Mac computer, have method of payment handy, and
the lucky ones were able to order a "Replacement OS X 10.4 DVD" or
a "Replacement OS X 10.5 DVD" from Apple directly. These are White-
Label, and should work across several models of PPC (G4/G5) Mac
to install a complete basic OS X, in the supported hardware, and be
good to use as a means to upgrade to the last supported OS X for PPC.
If your iBook has a processor less than 867MHz speed, it would not be
able to be upgraded past Tiger 10.4.11; if it has a cpu faster than that,
it should be able to use the OS X 10.5 system install DVD.
So if you are among a lucky few, you may be able to order Apple disc(s)
direct from an expert, the system replacement discs with white label. For
the older Macs as noted above (and when available) had a cost of about
$20 per each. There may be an additional shipping fee, but still if you can
get either one or both OS X versions on Apple media, that's a deal.
About the Safari 4.x browser, crash. Had you repaired disk permisssions
in the system by use of Disk Utility? I'd safe-boot startup first, repair disk
permissions, then restart to see if it helps. You may also be able to get
a replacement download of the same old Safari browser from Support
online, should there be a need to, in the course of troubleshooting it.
http://support.apple.com/downloads/#safari old version download page
You can use Safari to assign another browser to be system default, so
a different one will launch (see Safari prefs) instead of older Safari. I
have SeaMonkey for PPC (works in OS X 10.5) set as default.
Good luck & happy computing!
edited

When I open firefox my screen fills up and I don't have the top part with the tool bar or tabs. How do I fix this. It does not do this with explorer

When I open firefox the whole screen fills with the firefox page but no tabs or toolbar at the top of the screen. It does not do this if I use Internet Explorer. I can google say, my email of facebook and I can get there but there is no way to get out of this page, no "red" X to close the sight.

"F11" toggles Full Screen mode on/off
see
* Firefox and other Browser Keyboard Shortcuts (Comparison Table) http://www.mvps.org/dmcritchie/firefox/keyboard.htm
Not to be confused with Maximize/Restore button in upper right corner which leaves your toolbars intact.
Just noticed your mention of missing the red "X" (red background), are you also missing the vertical scrollbar on the right side.
* Resizing oversize window - MozillaZine Knowledge Base http://kb.mozillazine.org/Resizing_oversize_window
If you are referring to not being able to close a tab, you will not see the "X" on a tab if it is the last tab, in fact you may not even see the tab bar, that depends on your options and on configuration options for how the close tab is to appear.
Check your '''[http://kb.mozillazine.org/About:config_entries about:config]''' options
:The following options are found within these two articles
* About:config entries - MozillaZine Knowledge Base http://kb.mozillazine.org/About:config_entries
* Tabs configuration, extracted from About:config entries - MozillaZine Knowledge Base http://dmcritchie.mvps.org/firefox/tabs_config.htm
'''browser.abs.autoHide''' Boolean
:Behavior for the tab bar when only one tab exists
:True (default): Hide the tab bar
:False: Always show the tab bar
:Note: In Firefox, this can be changed via "Tools → Options → Tabs → Always show the tab bar (Firefox 2 and above) or Tools → Options → Tabs → Hide the tab bar when only one web site is open (Firefox 1.5).
'''browser.tabs.closeButtons''' Integer (Firefox 2.0)
:This preference controls how close buttons can be displayed on tabs.
:0: Display a close button on the active tab only
:1: (default) Display a close button on each tab
:2: Don't display any close buttons
:3: Display a single close button at the end of the tab bar (Firefox 1.x behavior)
 Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it. But please also leave a comment because of the several possibilities and we would like to know which problem you actually experienced.

Is it possible to import a Fixed Text file that does not have a header?

I'm trying to import a Fixed Text file through Import Manager, but the text file I am receiving does not have a header on it (the first row is valid data). When I try importing this, Import Manager uses the first row of data as the headings. Is there any way to turn this off and tell Import Manager there is no header data in the file?
Thanks!

Hi Ryan ,ur requirement can be met only when u import the file as ODBC .for this follow the below steps.
1)Go to control panel,in ur settings,select administrative tools
2) In that select DATA SOURCE(ODBC ).
3)Go to SYSTEM DSN tab select tab .
4)Select ur file type MICROSOFT TEST DRIVER (.txt,.csv)
5)Double click on "Import DSN" and in the blank give the name of DATA SOURCE NAME any name u want to give.
6)Uncheck the use current directory box and select the directory ur file is it will automatically show ur source file select it and click ok.
7) Now when u import ur file as ODBC give the name of ur DATA source name which u have given and it will show ur file in the source preview itself .
In this way u can import ur file as ODBC.
Hope this may help u.
Regards
Ankit

HT201406 how do i fix my iphone that does not do anything

Similar Messages

Maybe you are looking for