HT201406 i phone 4 various buttons do not respond & connot access contacts list

i phone 4 various buttons do not respond & cannot access contact list l

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.    

Similar Messages

  • I have 2 people in my contacts that I'm unable to text. The SEND button does not respond

    I Have 2 contacts that I'm unable to text to. The SEND button does not respond. Other contacts will send message.

    Hi Gaylene1949,
    So the issue is isolated to two contacts only.
    There are a couple sections in this article for troubleshooting contact specific issues.
    iOS: Troubleshooting Messages
    If you still can't send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Make sure that the contact you're trying to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    and
    If you still can't send or receive SMS, follow these steps
    Make sure that the contact who's trying to message you isn't blocked in Settings > Messages > Blocked.
    Make sure that you're using the area code with the contact's phone number. When sending messages internationally, you also need to use the contact's international code.
    If you're using a "Pay as you go" SMS plan, make sure it has enough available balance. Contact your carrier if you're unsure of your SMS plan or the available balance.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
    Thank you for using Apple Support Communities.
    Nubz

  • I purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.

    i purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.

    You have a one-year hardware warranty & 90 days of free phone support. Take advantage of it, make an appointment at an Apple store or call AppleCare.

  • Phone 4 home button does not work, iPhone 4 home button does not work

    Phone 4 home button does not work. I tried to put it off and on, but to no avail. Tried updating, still nothing.

    No magic solutions for a hardware problem.  You'll need to bring your phone to Apple for replacement ($149), or find a 3rd party to fix your phone (which will forfeit all future support on that phone, warranty or otherwise, from Apple)

  • My iPhone 5 lock button does not respond anymore I have heard this is a common fault with the iPhones?

    My iPhone 5 lock button does not respond at all I have heard that it's quite a common problem with the iPhone are apple fixing them or do I have to pay to get it done?

    As long as the iPhone is a UK ( I assume you are in UK ) purchased iPhone from the normal authorised Resellers ,Apple and the UK carriers and those selling the Carrier's  products like CPW or Phones -4 -U etc

  • Iphone 5 home button does not respond, brightness reduces by itself, wont charge and its one week since i got it!

    one week since i got the iphone 5: screen blacks out, when i finally get it to light up the light brightness turns low.
    problems charging phone, just doesnt want to charge unless i reset the phone.
    the main home button does not respond at times, approx 3-5 times a day this occurs
    phones touch screen does not respond at times...whole touch screen, no response!
    signal always drops out, this could be a network issue though i doubt it.
    speaking to quite a few peopl i know, they are havng the same issues with there 5 but not as often as myself.
    if i knew the 5 had so many issues i would not have chosen it, the 4s was fine!

    Then take it back!  If you've only had it for a week, you still have 51 weeks of warranty.  If you are in the USA, you are also within your 14 day unconditional return for full refund period.  If it has that many problems, just return it and get another one, or get your money back and buy something else.  There is no reason to live with a faulty device after just one week.

  • Iphone 4 home button does not respond, resetting fails to resolve issue

    the home button does not respond. i tried putting phone to sleep and waking up with home button (which worked, but then the home button does not return the screen to home page), a hard reboot with the home and power buttons, and finally a reset to factory settings and then synching again to my computer. the problem persists. 

    Bring it in for replacement.

  • HT4993 Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?

    Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?

    If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Year 2010-2011 MacBook Pro version 10.7.4 issues: freezes up, files are loading slowly and buttons are not responding

    Hello my fellow Apple product user's. My problem has been going on for about a month and half with my laptop locking up, file folders on my desktop loading slowly and my sleep button and other buttons on my dash board not responding. Where to being with my issues that are listed up in my title and my first scene. The first issue has been my file folders are not loading fast like that did before, the issue is that they load in about 10-15 if not a little longer after I log into my laptop desktop. The second issue is that my sleep button does not respond to sleep right away, I have to press it three or four different times after I have logged out of my desktop to make it go to sleep.  The final problem is dealing with my buttons and laptop locking up, when I started an application called runescape after it load to the log in screen and after I came back to log into the game it decide to lock up/ froze on me and durning that time my buttons on my dashboard was not responding, so I decide to command q to quit the application and after that buttons were not reponding to it and I decide to do common and control c to see if it would work and it did and after that everything has been working fine except for the files are loading slowly. Also I had another issue with the laptop sleeping so quick as soon I am using the Internet. There was one other problem that had happen to me just like my description in my first scene, but I do not remember that issue.
    Please no spamming, flaming and being plain rude to me and others. If you can not listen, read, or under stand my warning you will be kicked off from posting on threads buy a froum monitor. Pleas and thank you for posting and helping me out with fixing my problems.

    Hello my fellow Apple product user's. My problem has been going on for about a month and half with my laptop locking up, file folders on my desktop loading slowly and my sleep button and other buttons on my dash board not responding. Where to being with my issues that are listed up in my title and my first scene. The first issue has been my file folders are not loading fast like that did before, the issue is that they load in about 10-15 if not a little longer after I log into my laptop desktop. The second issue is that my sleep button does not respond to sleep right away, I have to press it three or four different times after I have logged out of my desktop to make it go to sleep.  The final problem is dealing with my buttons and laptop locking up, when I started an application called runescape after it load to the log in screen and after I came back to log into the game it decide to lock up/ froze on me and durning that time my buttons on my dashboard was not responding, so I decide to command q to quit the application and after that buttons were not reponding to it and I decide to do common and control c to see if it would work and it did and after that everything has been working fine except for the files are loading slowly. Also I had another issue with the laptop sleeping so quick as soon I am using the Internet. There was one other problem that had happen to me just like my description in my first scene, but I do not remember that issue.
    Please no spamming, flaming and being plain rude to me and others. If you can not listen, read, or under stand my warning you will be kicked off from posting on threads buy a froum monitor. Pleas and thank you for posting and helping me out with fixing my problems.

  • I attempted to update to the latest IOS version.  Then it seemed to "Lock UP".  Now all i get on display is a graphic of the power cord with an arrow pointing to an iTunes icon.  Home button is not responding.

    I attempted to update to latest version of IOS.  Now all I get on the display is a graphic of the power cord with an arrow pointing to an iTunes icon.  Ipad does not seem to power down or power up correctly.  Home button is not responding.

    I am new to this, could you provide me with a little more detail on how to do this?  Thanks so much!

  • Button does not respond (with attachment)

    Hi,
    I'm trying to develop a LV program for a psychology experiment to record a participants mouse movements whilst drawing or tracing a picture using the mouse.
    My program uses an event structure to generate an event each time the mouse is moved or the mouse button is pressed or released. Upon each of these events the coordinates and button position is recorded to an array.
    When they have finished drawing there is a button "Stop & Save" that allows the user to save the coordinate data to a file. This can then be opened by a sister program I'm developing that allows the movements to be replayed and shows where the mouse button was down and up.
    At the start of the program there is the option of loading a background jpeg picture to trace over on the screen.
    The program then waits for a 'Record' button to be pressed before moving on to record all coordinates there after until the 'Stop & Save' button is pressed.
    The problem I have is that the record button does not respond. It doesn't even change state when pressed, even though at that stage it's just sat in a while loop waiting for it to be pressed before moving on to the event structure.
    I attach the program for you to look at.
    Any help/hints much appreciated.
    Thanks,
    Dave.
    Attachments:
    MouseCoordinatesForPW.vi ‏178 KB

    altenbach wrote:
    Your overall program design is higly flawed. This calls for a single state machine with an event structure that handles all FP events. All your locals can be handled by shift regsters. Get rid of that useless stacked sequence!
    Frame 0: Initialization belongs to the left of the state machine. CoordinatesArray should initialize a shift register (no locals needed). Use a boolean shift register to set state to either recording or not. Event for "record, value changed" will switch the boolean to be used on the other states.
    Frame 1: "Clear" and "stop" need to be inside their own events. Running it parallel to the event structure is a no-no! Do you really want to record mouse movements on the entire FP or only on the picture area?
    Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes no sense.
    Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values.
    Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead.
    Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help.
    Message Edited by altenbach on 05-22-2007 09:23 AM
    Hi, thanks for your reply.
    The reason for the main stacked sequence was to get some order to the program, my programming background's text based and as such I like to think of a program running in a list/sequence order. LabView seems strange when you've been used to programming in asm or C. Does anyone know of any books or online documentation for people migrating from text languages to LV? - I haven't found any.
    "Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes sense."
    - The string 'CoordsArray' is cleared to make sure it's empty before chars concatanated to it in the next frame. Call me old fashioned but is it not good practice to clear out any junk in a variable rather than just assuming it's empty?
    "Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values." - not sure what you mean by that?
    "Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead."
    - No, it's not an empty string since in the previous frame the coordinates array is converted to numbers and concatanated to it. Trust me, it generates a file with lots of data in so no way is it an empty string!!
    - Yes, you could just swap the cases instead of inverting the 'canceled' output but sometimes it reads better to say 'if NOT cancelled then DO theTask, ELSE DO nothing' rather than 'if cancelled DO nothing ELSE DO theTask'. Not sure if that makes sense but I guess it's just personal prefference there.
    "Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help."
    - I wasn't sure how that one would work. I wanted the final exe version to close the program window when the program comes to the end, what's the best way to do that? In the past I think I used the 'Exit' function but this would annoyingly quit LabView at the end of each trial run whilst still in the development stage.
    Thanks,
    Dave.

  • Links or buttons do not respond in Firefox but do respond in Internet Explorer

    Sometimes and increasingly more often, links or buttons do not respond in Firefox, no new tab opens just nothing happens. But in Internet Explorer, the links or buttons respond normally and everything runs smoothly.
    What is the cause then ?

    No answer yet ????

  • My iPod touch 4th generation's power button is not responding most of the time. My home button will work 100% of the time. What should I do?

    My iPod touch 4th generation's on/off button is not responding most of the time. My home button will work 100% of the time. What should I do? PLEASE HELP!

    Restore your iPod touch in iTunes.

  • Unable to import or clear history because buttons do not respond and are not active

    When I try to clear history under Tools or import under File, the buttons do not responds. Other buttons work well and are somewhat highlighted, but these two do not respond.

    Make sure that you not run Firefox in permanent Private Browsing mode.
    * https://support.mozilla.com/kb/Private+Browsing
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Deselect: [ ] "Permanent Private Browsing mode"

  • Buttons will not respond

    I've had my 5th gen iPod for a loong time and I've had the occasional issue, but nothing that a reset wouldn't fix.  I went to go use it today and the buttons will not respond.  No lighting up when I touch the wheel, no play, won't even let me reset it.  I've plugged it into the charger, hooked it to the computer and restored it.  Nada. Zip. Zilch.
    Any suggestions or links to other threads with fixes?

    ideas?

Maybe you are looking for