HT201406 in scientific calculator mode the 7 8 9 numbers/area doesn't work on ipod touch, how can I rectify this?

The screen is not touch sensitive in the area covered by the 7 8 9 numbers when the ipod is in the horizontal (in scientific calculator orientation) - the rest of the screen is fine. But because of the ares affected I cannot even log on to internet as the password needed has the letters in the affected area!! Frustrating!!
Any idea how to correct this - in simple terms please as I am not very technical at all!!
There are no physical marks or scratches on the screen in the area affected.

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

Similar Messages

  • I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?

    I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?

    Skipping songs
    The iPod seems to fail to play all of the occasional track that iTunes, and indeed other PMPs, are happy to play. There is probably some minor technical error in the internal structure of the file which is normally ignored by other playback software but causes the Classic to bail out.
    If you use Windows you may like to try scanning the files with MP3Validator which can find & fix some internal MP3 errors.
    Some users have also suggested that completely removing all id3 tags and then replacing the information can be a solution. This can be achieved in iTunes by selecting an affected track, right/control clicking and using the option Convert id3 tags> None. Since some files may mistakenly have more than one tag you may need to repeat this action. Once you have confirmed that no tag is present you can replace the tag information using Convert id3 tags > V2.3 (I believe it is recommended to avoid using V2.4).
    Personally I have found files for which these solutions don't work. In this case the workaround is either to re-rip the tracks or get iTunes to re-encode the file, e.g.convert AAC to MP3 or vice versa and sync the newly encoded file to the iPod instead. Because transcoding will cause a loss of fidelity you should keep your original file so that if a future iPod firmware resolves this issue you can put your original files back onto the iPod.
    tt2

  • When I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

    when I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

    Please confirm what version of OS X you are running - I doubt it is the ancient OS 10.1 !

  • I accidentally erased my ipod touch how can i restore the home page, i accidentally erased my ipod touch how can i restore the home page

    i accidentally erased my i pod touch how can i restore the home page ?

    Connect the IPod to yur computer and restore via iTunes on the computer. For how to restore see:
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    How did you erase the iPod?
    What do you mean by restore the home page?

  • My gmail in the email app doesn't support thai e-mails. how can i fix this?

    I currently own an ipad 2 and am loving it! However, when I go to check my g-mail through the e-mail app, i get a funky script like: ÑáĶ áæØé
    It's only for emails sent from thailand in thai font. why is this happening and how can i fix it?
    Please help.

    It is no doubt an encoding problem.  Unfortunately the iPad Mail app lacks the ability found in the full OS X to switch encodings.  The only thing you can try is to switch the OS language to Thai and see if that helps.  Or try reading your mail with a browser.
    Or ask the senders to use Unicode UTF-8.
    You can report the problem to Apple here:
    http://www.apple.com/feedback/ipad.html

  • HT201363 It appears that I have forgotten the answers I entered for my security questions. How can I rectify this issue?

    I am trying to download music however because I have a new computer it is asking me to enter a security questions.  I have forgotten what I entered as the answers.  I can not figure out how to create new security questins without having to recreate a new password.

    You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (103457)

  • I had a power mac g4 into which i put 3, 320 gb PATA hard drives in a raid slice config so that it worked as one drive needless to sat that i lost the g4 to a surge but the drives are good. now i have an imac, how can i recover the info off those drives

    i had a power mac g4 into which i put 3, 320 gb PATA hard drives in a raid slice config so that it worked as one drive needless to sat that i lost the g4 to a surge but the drives are good. now i have an imac, how can i recover the info off those drives. can i put the drives in external cases and plug them all in, will the imac see them as a raid slice then  help please

    Before you have another accident:
    Buy a UPS of good quality and sufficient to your needs.
    I would have to assume that the drives were connected to a PCI PATA card, hopefully. Otherwise, well RAID and having drives on the same bus (master and slave).
    And no backup, none at all...
    Get your hands on a G4.
    Data Rescue 3 from Prosoft maybe.
    If they were SATA and running on PCI SATA controller, very popular and common really in G4s, more options would be open.

  • When saving my illustrator file to a pdf it doesnt show all the artwork ie boxes are hidden in the pdf or only showing part of them. How can I fix this?

    when saving my illustrator file to a pdf it doesnt show all the artwork ie boxes are hidden in the pdf or only showing part of them. Even some text is hidden. I have flattened the artwork so everything is in one layer. How can I fix this?

    Hi John
    I have indicated on the attached jpeg where the problem is, basically a line of text is missing at the top and part of the feeding diagram is missing. I created the artwork in different layer and then flattened. All text has been converted to outlines, however the areas being affected have no transparency, I have used solid fills or no fills. I get the same result when I export the file as a jpeg. Hope you can help.

  • IOS 7 doesn't work on iPod touch 4g, so does the mean its the end for this device? Or are they going to make updates specially for lower devices an apps that are compatible ??

    iOS 7 doesn't work on iPod touch 4g, so does the mean its the end for this device? Or are they going to make updates specially for lower devices an apps that are compatible ??

    Which apps remain compatible will be up to the individual developers who sell those apps. There will be no further iOS updates, but those aren't really necessary to continue to use and enjoy your device. I still have an iPad 1 running on iOS 5, and it is fully functional.
    The App Store has an app called VintApps 3.1.1 that is specifically geared toward iOS 3.1, however, you would probably be able to run most of those apps on your iPod, and considering that there will be a rather large market for iOS 6 apps users, it is not likely that you will see a significant reduction in choices any time soon.
    It is not the end for the device in any sense except that it is at it's ultimate iOS level. And again, I have an iPad that is at it's ultimate iOS level (iOS 5), and I get new apps all the time that work for both my iPad and my iPhone that runs iOS 6.1.1
    No need to fret....
    Cheers,
    GB

  • Within Music Library can anyone please explain why when I select the option to sort 'Album by Artist' a number of tracks are being treated as separate albums?  How can I correct this?  I have tried to 'drag and drop' but that doesn't work.

    Within music Library can anyone please explain why after I select the option to sort 'Album by Artist' a number of tracks are being treated as separate albums?  How can I fix this?  I have tried to manually correct by 'drag and drop' individual tracks but that doesn't work.  My music library includes a number of repeat album artwork images simply because not all tracks are being listed under the one album making my library more difficult to use than it should.  Any advise would be appreciated.

    See Grouping tracks into albums.
    tt2

  • I've bought and downloaded music from itunes, but the ends of almost all my songs are cut off and will not play, how can I fix this?

    I've bought and downloaded music from itunes, but the ends of almost all my songs are cut off and will not play, how can I fix this? Most of the music cuts off abouthalf way through the song, then it skips to the next one. Itunes also says I have not purchased the album though it is listed under my purchased albums. It's incrediabley frustrating, please help.

    go to the itunes store. select more in the bottom right select purchased. then press the cloud icon to DL striaght to the phone. Id use wifi. you can also DL into computer then synv over to phone.

  • When uploading my formatted resume to my Apple Jobs profile, I am always presented with a c:\fakepath message and the resume does not upload. How can I rectify this?

    When uploading my formatted resume to my Apple Jobs profile, I am always presented with a c:\fakepath message and the resume does not upload. How can I rectify this?

    Add this one to the list of thinks that don't work on the Apple Job Board. It looks like Apple is using ADP's VE (Virtual Edge) technology to run this system, and I've been stupified by the number of features that are just broken, or so poorly thought out by ADP as to be unusable, (certainly for webkit and mozilla browsers at least: I didn't bother checking IE.)
    Here are a few highlights:
    "My Job List", list of jobs applied for, seems to max out at three. You can apply for more than that, but you can only see the first three.
    "Search Using Your Resume" feature yields few or no results, even when the pasted text contains only common, exactly matched words like 'Design' or 'Engineer'.
    The missing resume upload, described in this thread.
    "My Job Agent" seems to never flag anything, at least it hasn't ever for me despite pretty loose criteria.
    Agent's created using "My Job Agent" eventually just disappear, which is fine because they don't seem to work.
    When updating a profile, acknowledging the 'Terms' happens twice in a row. 
    Job seekers can only supply one cover letter despite being able apply for several jobs.
    Pagination for search results only appears at the top of the page, so it's necessary to scroll down through each page, then up to the top again to proceed to the next page.
    Well, I'm sure there are others, but you get the idea. I hope the Apple folks can fix this, (or twist ADP's arm to fix it,) so it better represents the quality of experience that Apple is so respected for consistently delivering.

  • Firefox opens but no content is shown, url says the website but the tab does not load up and says '(untitled)'. how can i fix this?

    firefox opens but no content is shown, url says the website but the tab does not load up and says 'untitle'. how can i fix this?
    == This happened ==
    Every time Firefox opened
    == after norton asked me to restart my laptop. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; eSobiSubscriber 2.0.4.16; .NET4.0C)

    Hi,
    Unfortunately we had a data base error today and lost some user accounts when we had to go back to our backups. If you have started this thread, your's is one of those. Since we can not recreate your account, please sign-up for a new account here to reply to the forum messages:
    https://support.mozilla.org/users/auth
    You can use the same username and email address as before. We are very sorry for the inconvenience.

  • After I downloaded the new version of iTunes 11.0.1 and i try to open it it says: ''There is no application set to open the document ''iTunes 11.0.1.dmg.part''. How can i install this without paying for an app to do it?

    After I downloaded the new version of iTunes 11.0.1 and i try to open it it says: ''There is no application set to open the document ''iTunes 11.0.1.dmg.part''. How can i install this without paying for an app to do it? What apps can i download to do this type of work.

    .dmg.part is not a complete file..  It usually indicates that the entire file has not been downloaded yet.  Are you sure you downloaded the entire file?   (i recommend updating itunes through  > Software Update
    Alternatively, you can download it from here: http://support.apple.com/kb/DL1614

  • TS3899 My emails are showing as 'read' but they are not read!  How can I rectify this problem?

    My emails suddenly keep showing as 'read' but they are unread.  How can I rectify this problem?

    Is the folder pane collapsed? View(or AppMenu/Options)/Layout/Folder Pane. Otherwise, deleting foldertree.json might fix it:
    http://kb.mozillazine.org/Toolbar_or_windows_layout_not_working

Maybe you are looking for