HT201406 My iPad touch pad is so sensitive keeps repeating leetteers ( that's an e.g.)

My touch pad on my iPads is so sensitive it keeeeps doing that!!  it is so frustrating when typing passwords as it is not always easy to seeee if a leetteers is repeating before it disappears this has been happening for a while now even numbers repeat.

My touch pad on my iPads is so sensitive it keeeeps doing that!!  it is so frustrating when typing passwords as it is not always easy to seeee if a leetteers is repeating before it disappears this has been happening for a while now even numbers repeat.

Similar Messages

  • My iPad touch pad is requiring harder tapping. This is first iPad. Any solution?

    My iPad touch pad is requiring harder tapping. This is first iPad. Any solution?

    Start with a reboot, hold both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if that appears.
    Then make sure your fingers are clean when touching the screen, and if you have a screen protector on the screen see if you can remove it and does that help.
    The screen is not pressure sensitive so taping harder really doesn't have any effect unless you are not making good electrical contact with the screen.  The iPad uses capacitance technology that is entirely elecrical state change dependent.  So if you have a screen protector that can interfere and cause that behavior.
    If none of this helps, it may just be an aging unit, and would do well to be tested by the techs at an Apple store genius bar.

  • I am trying to sync my iPhoto to my iPad from my Mac but iTunes keeps telling me that my iPhoto Library can't be found.

    I am trying to sync my iPhoto to my iPad from my Mac but iTunes keeps telling me that my iPhoto Library can't be found. I obviously can see that I have many photos and events so I am not sure why I'm getting this message.I have all the current software and have been playing around with it for hours and can't figure out the problem. Any help would be greatly appreciated.

    im having the same problem!

  • HT201406 my ipad touch screen is not working please give solution for it.

    my ipad touch screen is not working please give solution for it.
    i have connected ipad to itunes and done it restore seetings then also my touch is not working but
    when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

    If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
    Regards.

  • Zen MP3 Micro.........Touch pad WAAAAYYYYY too sensitive !!!!! HE

    Hi!
    I just bought the above and, even with the sensitivity set to "LOW", it it STILL way too sensiti've for me to go thru the menus.
    The hardest part is to reply YES or NO when deleting a playlist....sometimes, it's takeen 0 MINS of repeated tries!!!!!!!!!
    (I touching it as lightly as i CAN!).
    Is there any way to make it even LESS sensiti've?
    Thank you,
    Norm Vogel

    americangurl wrote:
    updating the firmware will delete all that is on your player now but if the toutch pad annoys you this badly i would think it wouldnt be to much effort. before you update you should make sure you dont already have the newest update.
    Maybe I was lucky, but I've updated the firmware a few times and still have tracks that I loaded the first day I got my Zen Micro.
    <B>Note</B>: I've only updated to the ..0 firmware; not the 2.x versions.
    To update your firmware, go to the top of the page where it says <I>Support</I>, go to <I>Downloads</I>, click <I>Mp3 Players</I>, <I>ZEN</I>, <I>Zen Micro</I>, <I>Select Your Language</I>, <I>Select Your Operating System</I>, <I>File Type (<B>firmware</B>)</I>, hit <I>Go</I> and select <I>Creative Zen Micro Firmware ..0 (2.03 MB)</I>, unless you need features that version 2.20.05 has.

  • HP ProBook 4530s mouse touch pad

    I have disabled mouse touch pad. Having restarted laptop I noticed that LED indicator for mouse touch pad was turned off and mouse pointer accepts finger moves/clicks on touch pad (it was enabled) until I logged on when LED turned on and mouse touch pad was disabled . Is this normal behaviour? The same is happening when laptop is powered on.

    Hi BoxIKG,
    Thank you for your inquiry, 
    Your Probook is a commercial unit.   I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Commercial/Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Dell Inspiron 5547 laptop touch pad issue

    I have Dell inspiron 5547 laptop. I have touch pad issue. Touch pad is looks it's working but It's not working properly. I can't click on file or any where else. I call dell for support they first uninstall all drivers for Touch pad and re install it. After that it works goods for 2-3 days and once again problem is same.
    After that I call once again dell support and they send technician to my house to change touch pad after he change, in few days problem is same.
    After that I send my laptop to support center and after getting system back I have same issue.
    so I call once more times and they send technician to change hard drive with inbuilt OS. After that In just 2 days I have same problem. Now I request dell to replace my system and I am waiting for their approval But If any One have Any solution then please Reply me 
    Thank you

    Hi Raj7108,
    I would advise you to download and install the ‘TouchFreeze’ software from the link below and check for issue resolution.
    http://bit.ly/oS0Hd
    Please let me know if this helps.

  • Apple Smart Mouse vs Touch Pad for Aperture, etc.

    I switched to an iMac a few years back and really love it. My only "complaint" is that the Smart Mouse (which I really love the functionality of) is a bit too small and no one has deemed it necessary to make a larger one. Every time I go into the Apple Store hoping for a larger version, it is suggested I try the Touch Pad.
    So the question is - for those who use the Apple Touch Pad for applications like Aperture, Photoshop/Pixelmator, Nik Software, etc. - how is the control using the Touch Pad vs a mouse? I know that it is fine for "normal" - meaning non-Photographic applications - and I can use all the gestures that I would miss with a normal mouse. (Before you suggest it I have a Wacom tablet, but generally for quick touch ups I just don't bother taking it off the closet shelf.)
    Thanks, Steve

    Hi Steve -- I imagine this is as much a matter of personal preference (and skill) as actual performance.  IME, the Magic Mouse is just about the worst pointer to use with Aperture.  The Apple touch-pads are (again, just my opinion) excellent.  I don't hesitate to recommend that you try one out.  There are some touch-pad techniques that may not be obvious: roll your fingertip for minute changes; use one index finger to click, and the other to drag; etc.
    I also recommend any high-resolution mouse (generally sold as a "gaming mouse").  I used a Razer Naga until it wasn't updated to work with 10.8;  I switched to Logitech's G600 12-button mouse.  The programmable buttons accelerate my work, but (imho) high-resolution is the feature you really want.  I have my entire dual-monitor workspace mapped to an area about 2" x 4", and can move the mouse curser very close to pixel by pixel.
    Both the high-res mouse and the touch-pad are _more_ precise than the Wacom Intuos Medium.  In my hands, the cursor regularly moves a pixel or three when I lift the pen.  With the touch-pad or the high-res mouse I can work at Image resolutions smaller than 100%.  With the Intuos, I am better off at 100%.
    HTH.
    --Kirby.

  • External ergonomic keyboard with touch pad

    I'm a MacBook Pro user, and have an external ergonomic keyboard (at home).  It does not have a touch pad, but I'm looking for one that does.  Any suggestions?

    Per the Info here:
    http://store.apple.com/us/product/MC380LL/A?fnode=MTY1NDA1Mg&mco=MTg1ODE3MDE
    the Magic Trackpad requires Mac OS 10.6.4 or higher and your equipment line says you are at 10.4.9. You'd need to upgrade your OS. Any MacBook Pro can run OS 10.6.

  • Certain touch-pad features aren't working.

    Computer - HP g71 (Notebook)
    My laptop has a feature where you can perform certain actions by tapping a corner of the touch-pad. I have it set so that the top-left corner acts like clicking the middle button/scroll wheel on an actual mouse. Normally doing this on a link would open it in a new tab, but recently this has stopped working. The problem only seems to occur in Firefox, as the touch-pad still works perfectly with the rest of my computer.
    Can anyone tell me how or if I can fix this?

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *If you have many extensions then first enable half of the extensions to test which half has the problem.
    *Continue to divide the bad half that still has the issue until you find which one is causing it.

  • HP Laptop needing to disable my touch pad?

    I am trying to make my touch pad sleep or disable or something so that when I am typing and my palm hits it, nothing will move? Can you help me disable it? I have a HP Laptop G62-340US

    winewithtrish wrote:
    I am trying to make my touch pad sleep or disable or something so that when I am typing and my palm hits it, nothing will move? Can you help me disable it? I have a HP Laptop G62-340US
    Double-tap the touch zone at the top left side of the touchpad to disable it - once disabled the light will turn amber.

  • Touch pad keeps disabled when windows starts on Equium

    The touch pad on my laptop keeps disabled every time I start up my computer, I noticed that an icon appears in my task bar which is the same picture on my F9 key of the circular cross over the touch pad, however once I press Fn+F9 keys the touch pad works fine until I start up the laptop again

    If you have some problems with the notebook shuts down procedure so possibly it happens because some programs and applications are running in the background of the OS and cannot be disabled.
    Mostly reinstallation of such application could solve such issues.
    Im not 100% sure if it will help to solve the touchpad issue but try to reinstall the touchpad driver and the utility. Check the Toshiba page for updates.
    Furthermore you could check the settings of the touchpad in the control panel in the mouse option

  • My iPod touch keeps telling me that my Apple ID has been disabled - I have changed my password twice. Is there a phone number that I can call to actually talk with someone about it?

    My iPod touch (3rd gen - 64 gig)
    keeps advising me that my Apple ID has been disabled - it doesn't say for security reasons
    I have reset the device, changed my password twice, and left it overnight but it still will not allow me to update OR install any new apps (that have been paid for).
    Does anyone have a phone number that I can call that will reach a person who can get it sorted out???

    Unfortunately, I don't have a number, but if you go the apple.com/support/itunes, it'll give you the pathway to connect with iTunes support. You can also just go straight to Express Lane. Hope this helps!

  • Satellite P300 - how do I adjust the sensitivity of the touch pad?

    I have read all of the forums without luck. Is it possible to adjust the sensitivity of the touch pad? I have gone into the control panel and clicked through the mouse settings but there is no 'Advanced' or 'Synaptics' tabs allowing this to be adjusted. At the moment, I am using the FN + F9 to disable the touch pad altogether, however I am hoping that this is a short term solution. Thanks for any replies.

    If Synaptics driver is preinstalled on your notebook you can find advanced settings HERE .
    When you open the properties the last option is Sensitivity .

  • Sound is stuttering, touch pad is also less sensitive

    HP Pavillion g6 Notebook PC
    Serial Number 5CD1387VN3
    Product Number QG470PA#ACJ
    Window 7 Home Basic
    64 bit
    no sound from right side speaker
    & sound is stuttering from other speaker
    touch pad's sensitivity has also altered. sometime cursor is moving less and sometime more

    omg, iv had a creative for time and i always look there to see if i missed any options, i thought that ment 'turn off the touchpad' im a **bleep**:smileytongue:, cheers mate

Maybe you are looking for

  • Playback head lag in LPX 10.0.4

    I'm working on sessions I began with Logic Pro 9. They seem to have imported cleanly into Logic Pro X. However, in Logic Pro X the playback head is lagging behind the visual representation of the audio by at least half a bar. A serious bug -- unless

  • Compilation problem in Forms 10g

    Currently we are upgrading from 6i to 10g forms we have 2 forms which we will complie partially in 10g and the form gets closed as a corrupted file. The same form when complied in 6i works fine. What can be the possible problem. Please help Thanks Ya

  • Scanner Photosmart c309a and Xsane problem

    hi guys i think i am going mad with my stupid scanner. i have scan over 5000 pages with xsane and the HP C309a scanner. Yesterday the time i was scanning some docs, my scanner suddenly stopped i mean the bar with the lights stopped at a point and i c

  • Wrong results in URL iview and overview of URL parameters

    I have created an URL iView that is supposed to query an index and return results. I am using the URL: /irj/servlet/prt/portal/prtroot/com.sap.km.cm.service and added following URL parameters: StartPage=SearchPage ConfigFileName=Navigation.xml layout

  • JDev 10.1.3 Prod Bug in Structure Window when using PL/SQL and Stored Types

    Using JDev 10.1.3 build 3673 When loading/editing a PL/SQL package with code like the following: rec := NEW Record001Row; Where Record001Row is a stored type on the database gives an "Error Expecting ;" in the JDev Structure Window. Once the above li