HT201406 Wondering why the touch screen display did not respond suddenly untill restart? Tx..

Wondering why the touch screen display did not respond suddenly untill restart? Tx..

Being an electronic/computer type device that can happen and often a Simple Restart or Reset (as described below) will often cure many such ills.... If the problem persists... Connect to iTunes on your Computer and Restore
Reset  ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Similar Messages

  • So im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    so im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

    This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
    So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

  • The wi-fi is working but I get I grayish screen when I use safari.  The touch screen is also not working but only on safari (well internet).  How do I fix that?

    Good day,
    I get a grayish screen when I access internet via my Ipad.  The touch screen is also not working but only with internet.  How do I fix that?
    thank you
    mélanie

    I have the same problem! Can anyone help us? Thanks!!

  • OS X Server / VPN /The L2TP-VPN server did not respond...HELP!

    I am very new to OS X Server and my goal is to setup DNS & VPN!  I would like to have this setup to be able to connect into my apple computer from work or friends house.  I am using an Apple Airport Extreme router and im also using the latest version OS X Mountain Lion with OS X Server installed.  I have started an account with dyndns website for user host name (using a [email protected] address). I assume this would be used as an alternate way of being able to connect without starting a personal website.  I also signed up for another site (no-ip) and I now have a different IP address (not sure if that was necessary). I then followed instructions on youtube (instructional videos by todd for OS X Server Mountain Lion) which seemed to be very easy to understand. But after setting up my VPN on the client side (network setting in system preferences), i tried to connect VPN (L2TP) and i receive this error message "The L2TP-VPN server did not respond. Try reconnecting. If the problem continues, verify your settings and contact your Administrator.". When I open Consol in the utilities folder, I am seeing part of the following message below;
    racoon[117]: IKE Packet: transmit success. (Phase1 Retransmit).
    racoon[117]: IKE Packet: receive failed. (malformed or unexpected cookie).
    pppd[490]: IPSec connection failed
    Does anyone know what's happening or what I need to do to fix this?  Or can someone tell me the basic requirements to setting things up correctly?

    Im using Comcast for my ISP and from the wall I have a Motorola Surfboard 6120 cable modem (not sure how to access my setting on the modem). So basically I have my 6120 cable modem connected to the Apple AirportExtreme router and is then wirelessly connected to my macbook pro.  im providing screen shots of my apple router settings, OS X Server settings and firewall (which is turned off) settings.  Any suggestion on how i should set things up or if you can tell me step by step would be greatly appreciated.

  • VPN Problems - The L2TP-VPN server did not respond

    Okay, so I read quite a few threads about this and can't really figure it out. Would be great if I can get some handholding.
    I'm a complete newbie, trying to set up Server for home use. The VPN service seems to be running fine, but I just can't connect from the clients, it just keeps saying "The L2TP-VPN server did not respond". Here is a glimpse at my settings:
    - I have opened up all the relevant ports for UDP (500,1701,4500) and TCP (1723). But this is only required for the Server, right?
    - I don't have a domain name yet so just using my external IP. This is what I put in under VPN Host name in the Server and Client settings.
    - I login with username and password credentials for one of my network users as created in the Server. Format is [email protected] and the password is the same as the login password.
    ** I seem to get a 'authentication failed' error if I just use my local IP address... Not sure whats happening their, but before that I need to be able to connect to Server with the external IP!
    Am I missing something? Why won't my client connect and that too when I'm at home?

    To run a public VPN server behind an NAT gateway, you need to do the following:
    1. Give the gateway either a static external address or a dynamic DNS name. The latter must be a DNS record on a public DNS registrar, not on the server itself. Also in the latter case, you must run a background process to keep the DNS record up to date when your IP address changes.
    2. Give the VPN server a static address on the local network, and a hostname that is not in the top-level domain "local" (which is reserved for Bonjour.)
    3. Forward external UDP ports 500, 1701, and 4500 (for L2TP) and TCP port 1723 (for PPTP) to the corresponding ports on the VPN server.
    If your router is an Apple device, select the Network tab in AirPort Utility and click Network Options. In the sheet that opens, check the box marked
    Allow incoming IPSec authentication
    if it's not already checked, and save the change.
    With a third-party router, there may be a similar setting.
    4. Configure any firewall in use to pass this traffic.
    5. Each client must have an address on a netblock that doesn't overlap the one assigned by the VPN endpoint. For example, if the endpoint assigns addresses in the 10.0.0.0/24 range, and the client has an address on a local network in the 10.0.1.0/24 range, that's OK, but if the local network is 10.0.1.0/16, there will be a conflict. To lessen the chance of such conflicts, it's best to assign addresses in a random sub-block of 10.0.0.0./0 with a 24-bit netmask.
    6. "Back to My Mac" on the server is incompatible with the VPN service.
    If the server is directly connected to the Internet, see this blog post.

  • "The L2TP-VPN server did not respond"

    I just bought an Airport extreme base station, and installed lion server, and configured it for VPN. I have checked all my settings and even looked using AirPort utility. I have tried connecting to my VPN from 2 different Macs and an iPad, and all yield the same error:"The L2TP-VPN server did not respond". When I look at my vpnd.log it is pretty bare:
    2011-08-31 18:27:34 EDT          Loading plugin /System/Library/Extensions/L2TP.ppp
    2011-08-31 18:27:38 EDT          Listening for connections...
    it looks like the VPN connection requests aren't making it from the airport to the server. Any ideas

    FWIW, my Lion Server VPN issue has been solved...
    https://discussions.apple.com/thread/2696981?start=30&tstart=0

  • IVPN starts, but "the pptp-vpn server did not respond. Try reconnecting."

    Hi. I am new to VPN, and I just got the software iVPN from Macserve, and the server starts successfully, using either PPTP or L2TP:
    But the connections from my network do not connect. Every time I click on "connect" for either network connection, I get the error "the pptp-vpn server did not respond. Try reconnecting."
    I set up both connections in my Network Preferences according to the support page (http://macserve.org.uk/support/ivpn/):
    My Airport Express configurations have never given me any problems with my home network:
    And I think that I forwarded the ports properly (even though my firewall is not activated):
    What am I doing wrong?

    The Apple routers can be a problem on vpn passthrough.
    Ports that are required for vpn are more complicated ..
    See earlier post.. eg How do I set up L2TP VPN?
    Ports for PPTP which you have opened manually.. are not valid for L2TP.. so you need several more ports opened.
    The problematic ones are GRE and ESP which are protocols not ports.
    I think you can pretty well assume the apple router running anything that has BTMM in it won't work.. since it will need the port 500 for itself.
    On the old express try going back to 7.6.1 firmware.. I have to say I don't use the express.. lots of extreme and TC.. so their firmware issues are slightly different so firmware versions for the express are somewhat different.
    Try not to use both port forwards (mapping if you must).. and DMZ.. they can fight each other.. if DMZ doesn't work it is better to turn it right off and forward all the required ports.
    Let me recommend a test.
    Plug your cable modem directly into the computer running the VPN.. so you have no NAT router in front of it.
    Pay attention to the local firewall that apple runs and what ports you will need to open on it to get vpn to work.. this is your best chance to get remote vpn running. If you fail with the public IP on the computer it will certainly fail through NAT.. and generally local firewall will be an issue.
    You should of course test that a client in the local lan can connect by the vpn.. it is always worth testing from the easiest configuration to the most complex.
    So local lan just as you have now..
    Then direct cable connection to the computer.
    Then NAT router.. but you can pretty well assume apple routers are going to be problematic because apple want to dally at BTMM using same ports as IPSEC uses for L2TP.
    My email is live.. roll your mouse over it and talk to me direct..

  • The embedded controller (EC) did not respond within the specified timeout period - Flex 15D

    Hello,
    I have an IdeaPad Flex 15D, and I have had several problems (mostly processor-related) in the time I have been using it. I contacted Customer Support twice, and finally did a system reset a few days ago after being told by Lenovo Support that my choices for fixing the problem were 1) Reset, or 2) Pay for a premium service to diagnose the problem. Needless to say (again), I went with option 1. So far I have not had any noticible problems with the processors, but there is a certain error showing up in the Event Viewer that I am concerned about. Lenovo Support has been next-to-useless troubleshooting my problems thus far, so I'm taking them here. The error is as follows:
    (Event ID 13)
    The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.
    Sounds like the BIOS needs an update, right? Well, I went straight to the Flex 15D drivers page, and guess what? I quote the drivers page: Bios update is not required for this product. Not required? So, Lenovo ships a broken BIOS and then refuses to support it? I don't know if Lenovo employees ever read this forum, so this might not be the best way to get their attention, but I am so fed up with Customer Support and I want this issue to be known to more than just a few unhelpful 'tech support' people. The Flex 15D isn't one of the more popular laptops out there, so I can't expect anyone reading this to be able to duplicate this problem or really provide any support, but if you have any suggestions whatsover, please reply to this thread. Like I said, I want people to know, and hopefully we can get Lenovo's attention so they can fix this problem.
    Best regards,
    Owen Dugmore

    Hi,
    I understand that you get the error message when performing a full crawl. I have seen similar cases caused by IE proxy settings. You can try to edit the Internet Options>Connections>LAN settings. Uncheck ‘Automatically detect settings’.
    For more information, please refer to this site:
    Search error: crawler could not connect to the repository:
    http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/c230ab36-8d0b-4c25-bf86-33136d17642b/
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • My iPad is running slow and the touch screen is slow to respond

    When I start up my iPad, the slider button doesn't respond to touch until the screen times out and I press the start button again.  Then the iPad runs sluggish.  I deleted some unused programs.
    Is there anything I can do?

    Quit all apps in the recents tray, reboot your iPad and then see how things go as you start using apps again.
    Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT3209 I have downloaded the Ironman 3 HD version. with this purchase was the added feature for second screen "Jarvis" app. The second screen bonus did not download properly. How do I recover this portion.

    I can not recover the second screen bonus feature which was included with the Iron Man HD version purchase. I try to use the redeem code again and the message received is "this code has already been used"
    How can I recover the bonus feature

    I can not recover the second screen bonus feature which was included with the Iron Man HD version purchase. I try to use the redeem code again and the message received is "this code has already been used"
    How can I recover the bonus feature

  • I have a HP Photosmart Premium printer and the touch screen resolution is not good ; I can see lines

    It's only 5 months old. Can this be fixed?

    Hi,
    If resetting the printer doesn't work.  Call the call center since your product is under warranty 1-800-HPINVENT
    Reset the HP All-in-One
    With the power on, unplug the power cord from the wall outlet and the back of the HP All-in-One and leave it unplugged for 60 seconds.
    Plug the power cord back into the wall outlet and the HP All-in-One.
    Turn on the HP All-in-One by pressing the On button.
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • I have an IPAD4 and the touch screen has stopped responding. I have alrwady tried the hard shut off and that did not work

    I have done a hard reboot and yet the touch screen still does not respond

    Troubleshooting Touchscreen Response...
    http://support.apple.com/kb/ts1827
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430

  • IPOHONE 4: I have a problem in the touch screen

    IPOHONE 4: I have a problem in the touch screen. Sometimes it responds ODD.. it is not working as the way it must be. when i touch an apps to open, insted of the desired apps, another apps opens. this is due to the touch screen issue.
    How do i Rectify this. I had restarted several times, Restored the settings, connected throubgh iTunes and updated the software several times. But still the prolem persists.
    Help me please

    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • I have iPhone 5 and the touch screen doesn't work

    I have iphone 5 and the touch screen doesn't work,i want to restart it but my touch screen is not working. I read lots of reviews and support from online all in vain. Please help me fix the problem.
    <Re-Titled By Host>

    Do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the device to boot back up.
    No data is loss doing a reset.

  • SAPRouter Status : Host did not respond

    Hi,
    When I try to open service connections some times I get it connected.
    But some times I get this message( Host did not respond ) with a warning sign on it.
    Please suggest what could be the problem?
    And why it is just a warning?
    Thanks & Regards
    Mrutyunjay

    Hi Juan / Wolfgang,
    Very much thankful for your time.
    Sorry for delayed response.
    I get connected to the sapserv2.. for some time the status remains connected.. and when i refresh it after some time it changes to "Host did not respond" ...
    If it is timeout it should not connect at all..
    Even though the status is Host did not respond still SAP is able to connect and work.
    Wolfgang : I will go through the note and will come back to you.
    Thanks & Regards
    Mrutyunjay

Maybe you are looking for