HT201407 I am trying to loginto the icloud control panel and I keep getting a message saying cant sign in cause of server messages. Can anyone help?
I am trying to set p my photo stream on my desk top. It says I need to log into Icloud control panel! Everytime I try to do that I get an error message that says can not sign in cause of server message! HELP?
Next day the problem still continued. I did restart my computer a couple of times and then "it worked". Not sure why - if it really was a server problem or something on my side.
Similar Messages
-
Fel: 0x8004010F: ZebraMapiCopySession::CreateMobileMeMessageStore: CreateMessageService failed
This is what i get when i try to activate contacts in the icloud control panel and no contacs are syncronised.....
iPhone 3GS, Windows 7After much some reasearch I fixed this problem for my problem computer. I have two computers running Windows 7 64-bit, one working with iCloud contact/calendar sync and the other getting this "0x8004010F: ZebraMapiCopySession::CreateMobileMeMessageStore: CreateMessageService failed" error (when you look at the report data to Apple).
So when I compared my system to a working system, I found that there was a difference in the bit-named DLL used by iCloud.
Go to Outlook, File, Options, Add-Ins and in the Active Application Add-ins section highlight "iCloud Outlook Addin". You'll find the DLL name there.
On my working computer, it was APLZOD6432.DLL, while on my problem computer it was APLZOD32.DLL. Ah ha! Its trying to setup Outlook 64 with a 32-bit iCloud DLL. Or so I thought.
I looked for a 64-bit specific install for iCloud. Nope, iCloud 1.1 is for both. Hmmm...
I thought I had installed Office 2010 64-bit on my problem computer, but apparently I installed 32-bit. I was able to confirm this by going into Outook, File and Help. Under "About Microsoft Outlook" it said 32-bit. Checking the working computer, it was showing 64-bit Outlook.
So this also brought another thought to my mind. Maybe the problem is because I installed the iCloud control panel before I installed Office 2010. That said, I uninstalled iCloud Control Panel (Add/Remove Programs), and re-installed it from the manual download page http://support.apple.com/kb/DL1455 and tried contact syncing again. It worked!
Then I went to check the DLL in use. It was APLZOD32.DLL. So perhaps iCloud sets up for 64-bit Office when no office is installed on Windows 7 64-bit and breaks when you install 32-bit. Or there is a part of iCloud install that needs to be done with Office installed. Either way, I'm happy to have the issue fixed. Leaving the 32-bit Office there for now. -
My Facebook app stopped working on my iPad. It keeps asking me to put the FB password in settings. When I do it tells me "unable to connect to server". Can anyone help?
This problem affects many (including myself) and seems to be a bug in the integration of the FB app in iOS 7.
You can get around the login problem by turning Settings/Privacy for FB off. However, after you turn that Privacy setting back on after logging in, then iOS 7 will continue to pester you with pop-up messages to enter the password in Settings. This will invariably fail with the error message that you have already experienced, but at least it gives a way of logging in.
The solution will in my view have to come jointly from Apple and FB. -
I have been trying to Export a 48 minute movie (stills, titles, transitions, and background music using iMovie 11 Ver 9. After a couple of hours of rendering, it stops with th efollowing error: "Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured. (File already open with with write permission)". Can anyone help? Thanks.
I'd start with the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I am trying to download itunes 10.7 and keep getting "error writing to file C\config.msi\6f8a6.rbf" Can anyone help?
Are you running Kaspersky security software on that PC? (There's been a few reports in recent times of Kaspersky interfering with iTunes installs, with that message being produced.)
If there is Kaspersky on board, we should try some general-principles getting-past-security-software-interference troubleshooting.
Download and save a fresh copy of the iTunesSetup.exe (32-bit installer file) or iTunes64Setup.exe to your Hard drive. (Don't run the install on line, and don't start the install just yet.)
http://www.apple.com/itunes/download/
Restart the PC. After the PC restarts do not open any applications. Disconnect from your network and/or the internet. Now switch off all your security software (firewall, antivirus, antispyware).
Now start the install by doubleclicking the iTunesSetup.exe (or iTunes64Setup.exe) file you downloaded earlier.
Reenable all security software prior to reconnecting to your network and/or the internet.
Any better luck with the security software shut down? -
HT201317 what is the icloud control panel and where do i find it
i just swaped my ipad to a refurbished one and i can not get my photos back on my ipad 2
Many users have lost photos while preforming a restore from backup or upgrading the iOS. Recall, only photos in the camera roll are backed up to iCloud. There is a way to turn backups for camera roll on/off, perhaps these users had camera roll turned off.
See:
Settings>icloud>Storage & Backups>Manage Storage, tap the device's name and on the next screen, be sure Camera Roll is turned on.
IMPORTANT...
Photos should be regularly synced to a computer (like you store photos from a digital camera) using either USB via iTunes (on a mac use iPhoto or Aperture to move them to an album) or using photo stream. If you have been doing that, then you can sync those photos back to your device.
If you haven't been saving photos except relying on iCloud to store them in a backup, then that is risky, as many users have discovered. I'm afraid I have no advice in this case - there is no "cure". -
How do I delete the backup? Will I loose all my information?
Disable your firewall/security software.
-
Does anyone know how to fix this issue?
download the cc desktop app to your desktop and install from there, Download Adobe Creative Cloud apps | Free Adobe CC trial
then install ps using the cc desktop app. -
I am trying to upload photos from my Windows 7 desktop, and was told to go to the iCloud control panel and drag the photos into the
upload to photo stream icon. I have downloaded the contol panel several times and cannot find the icon to get this done. HELPIf you're trying to add photos to photo stream on your PC, you drag them to your photo stream uploads folder (normally My Pictures\Photo Stream\Uploads).
-
Why can I not sign into the iCloud Control Panel on my Windows 8 PC?
I am trying to sign into the iCloud Control Panel and keep getting a server error message?
To solve this problem you can:
Windows 7
1) Click on Start
2) Type cmd and press enter
you will see a new window
3) type "netsh winsock reset"
4) restart the machine
should work.
If still does not work you must disable the firewall and antivirus
Para solucionar este problema debes hacer lo siguiente:
en Windows 7
1) click en Inicio
2) escribe CMD y pulsa enter
te va a aparecer una nueva ventana
3) escribe "netsh winsock reset"
4) reinicia la maquina
deberia de funcionar.
Si aun no funciona debes de deshabilitar el firewall y el antivirus -
Any help please why nothing happens when I tried to open the icloud control panel for the 1st time.
User name and password are correct.Any help please why nothing happens when I tried to open the icloud control panel for the 1st time.
User name and password are correct. -
I downloaded the iCloud control panel on my PC but can't sign in - message says "This apple ID is valid but not an iCloud account. I've tried the account set up several times but it keeps just spinning me in circles, asking me to sign in and then I get the same message again. This is getting frustrating and I really don't seem to be able to get help. I can't contact customer support because I have a PC and there is a serial number of an apple device required.Can anyone help please?
You can't setup (create) an iCloud account using a PC. You must use an Apple device, a Mac or an iPhone etc. Once you have created an account you can sign in from your PC.
-
I am trying to set up icloud on my pc. I open up the control panel and it keeps asking me to sign in and doesn't give me any options but that. What could be the issue?
To use iCloud, you must first set it up on an iOS device or a Mac.
Creating an iCloud account FAQ:
http://support.apple.com/kb/HT4436 -
How can I Use the iCloud Control Panel to pick a new folder
I apparently moved or deleted my iCloud folder and keep getting this message Use the iCloud Control Panel to pick a new folder. How do I do this?
I have/had the same problem, just started this morning. I tried a system restore to a known good date. I still had the problem so I rolled restored the system to the latest.
Thinking that it might have something to do with priviliges, I reviewed my user account and noticed it was set to "Administrator". On a whim, I switched my user account from administrator to "standard user" and I'll be... the issue dissapeared. I have no idea why. But I thought I'd pass it along. -
Problem with Office 2007 whenever I install the iCloud Control Panel for Windows
Sadly I have a Win7 laptop as my work hack and am using Office 2007. Outside of work I use iCloud to sync calenders between various iOS/OS X devices however whenever I install the iCloud Control Panel for Windows Plugin my email no longer loads. Outlook starts fine and just sits there with an empty inbox waiting for mail to load. I can't even open the iCloud Panel from within Control Panel either to set preferences!
Unistalling the iCloud plug-in resolves this but I really want to sync my iCloud calender with Outlook and can't see any other way to do it, plus it worked before and then just stopped.
Any assistance would be appreciated.I tired everything that was suggested in the forum. Tried IE and firefox to no avail. When I tried computers in stores both worked. A friend of mine who has the 32 bit setup got it to work. Several folks have stated it is the compatability issue with 64 bit. As a last resort, I loaded safari on my home computer, and yep, it works. Go figure, apple product.
Maybe you are looking for
-
How to upload/download file into/from blob column in ADF/JDev 11g.
Hello to all. I found demo from Kuba user on that page: http://kuba.zilp.pl/?id=1 But that demo is for release 10g and too complicated for me for this time (I'm fish in Jdeveloper). I can create some simple table view (of form view) with oracle conne
-
Datapump - expdp.open creates tables in schema
Hi i am using datapump in Oracle 10g to archive old partitions from the main schema to another schema. i notice that when dbms_datapump.open is called that a new table is created by dbms_datadpump for internal purposes. This is verified in the o
-
I'm using a session bean ProcessBean and an entity bean AlarmBean.... where one of functions processor() of ProcessDataBean is like...... processor() println(.a..); println(..b.); correlate(); println(.c..); And correlator() is like:- correlator() pr
-
How to configure backup server
Basis Gurus, I have a problem.Can anyone tell me the step the ,how can i configure the backup server regards gopal Thanks in advance
-
Change NETPR in TX. ME21N while saving
Hi to all, I need to change the netpr of all items in tx. ME21N but while the document is saving, 'cause the user doesn't want the new calculated netpr in display. I've been trying to use EXIT_SAPMM06E* but i can't make them work, specially EXIT_SAPM