HT201407 i have a vodafone iphone5 - how can i use it with an O2 card? can I unlock?

I have an iphone5 on a vodafone contract. How can i use it with an o2 sim and how can i unlock?

Only the carrier to which the phone is locked to can unlock your phone, call your carrier and ask them if they will.

Similar Messages

  • HT5622 Why can't I use my Apple ID to iTunes?  How can I use it with out credit card?

    How can I use my Apple ID in iTunes with out credit card?

    For me it's the same, I've just bought an iPad mini two weeks ago but I cannot log in with any Apple account in FaceTime.
    I enter my apple account in faceTime, then I press next the second screen and it shows "validating..." but it never gets validated.
    What's happening? This is really annoying

  • How do I use my AT&T SIM card for the unlocked Verizon iPhone 5s?

    So I am planning on getting an unlocked verizon iPhone 5s but the thing is my carrier is AT&T. So how do I use my AT&T SIM card for the unlocked Verizon iPhone 5s?

    If you plan on using AT&T, why on earth would you purchase a Verizon iPhone? Doesn't make any sense. Yea, it will work on AT&T's network, but you won't get LTE, only 3G. LTE requires using a Verizon sim.
    This is an extremely poor idea. Purchaase an officially unlocked iPhone, from Apple, if you want to use AT&T's network.

  • My cousin reported my iPhone stolen can i use it with another sim card

    MY Cousin reported my tmobile  iPhone 6 stolen because of personal issue what can i do I really need my phone

    There is nothing you can do, unless you can prove that you are the owner of the phone. Who was it reported to. The police? The carrier? They are the ones you have to deal with. Apple does not accept stolen phone reports. Here are Apple's instructions if a phone is actually stolen: Reporting a lost or stolen Apple product

  • Can't use iMessage with one person but can with everyone else and he can iMessage me

    So my husband has an iPhone 5c and up until recently has has iMessage turned off. He turned it back on recently and my phone hasn't figured that out yet. It still sends texts to him as SMS instead of through iMessage, yet any texts he sends to me come in as iMessage. What gives and how can I fix it?

    See if these articles help:
    http://support.apple.com/kb/ts4268
    http://support.apple.com/kb/ts2755

  • Can't use bumblebee with gt540m video card

    when i used bumblebee and i got the error message:
    http://imgsrc.baidu.com/forum/pic/item/ … 330e20.jpg
    i can't do anything except to press the power button.
    so,how should i do to solve this error? 
    thanks
    Last edited by jiangkero (2013-04-14 04:15:19)

    hadrons123 wrote:
    You are having kernel panic. post the output of
    lspci -vvv
    here is the following message:
    00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
    Subsystem: Acer Incorporated [ALI] Device 0370
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: <access denied>
    Kernel driver in use: agpgart-intel
    00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 00002000-00002fff
    Memory behind bridge: ac000000-acffffff
    Prefetchable memory behind bridge: 00000000ae000000-00000000bfffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) (prog-if 00 [VGA controller])
    Subsystem: Acer Incorporated [ALI] Device 0371
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 43
    Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
    Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Region 4: I/O ports at 1800 [size=8]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: <access denied>
    Kernel driver in use: i915
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    Subsystem: Acer Incorporated [ALI] Device 0370
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 42
    Region 0: Memory at f0804000 (64-bit, non-prefetchable) [size=16]
    Capabilities: <access denied>
    Kernel driver in use: mei
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
    Subsystem: Acer Incorporated [ALI] Device 0370
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at f0806000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci-pci
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
    Subsystem: Acer Incorporated [ALI] Device 0370
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 44
    Region 0: Memory at f0800000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
    I/O behind bridge: 00003000-00003fff
    Memory behind bridge: f0400000-f04fffff
    Prefetchable memory behind bridge: 00000000f0a00000-00000000f0bfffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    I/O behind bridge: 00004000-00004fff
    Memory behind bridge: f0500000-f05fffff
    Prefetchable memory behind bridge: 00000000a0000000-00000000a01fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
    Subsystem: Acer Incorporated [ALI] Device 0370
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 0: Memory at f0807000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci-pci
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) (prog-if 01 [Subtractive decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
    Subsystem: Acer Incorporated [ALI] Device 0370
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: <access denied>
    Kernel driver in use: lpc_ich
    00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
    Subsystem: Acer Incorporated [ALI] Device 0370
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 41
    Region 0: I/O ports at 1818 [size=8]
    Region 1: I/O ports at 180c [size=4]
    Region 2: I/O ports at 1810 [size=8]
    Region 3: I/O ports at 1808 [size=4]
    Region 4: I/O ports at 1820 [size=32]
    Region 5: Memory at f0808000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: <access denied>
    Kernel driver in use: ahci
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
    Subsystem: Acer Incorporated [ALI] Device 0370
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin C routed to IRQ 18
    Region 0: Memory at f0809000 (64-bit, non-prefetchable) [size=256]
    Region 4: I/O ports at 1840 [size=32]
    00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
    Subsystem: Acer Incorporated [ALI] Device 0370
    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin C routed to IRQ 18
    Region 0: Memory at f080a000 (64-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>
    Kernel driver in use: intel ips
    02:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff) (prog-if ff)
    !!! Unknown header type 7f
    03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
    Subsystem: Acer Incorporated [ALI] Aspire 7740G
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 45
    Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: tg3
    05:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
    Subsystem: Quanta Microsystems, Inc Device 2309
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 17
    Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: ath9k
    ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
    Subsystem: Intel Corporation Device 8086
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
    Subsystem: Intel Corporation Device 8086
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
    Subsystem: Intel Corporation Device 8086
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
    Subsystem: Intel Corporation Device 8086
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
    Subsystem: Intel Corporation Device 8086
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
    Subsystem: Intel Corporation Device 8086
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Last edited by jiangkero (2013-04-14 12:16:10)

  • Can you use Magento with Firefox. I can't browse for images when I trying to add an image to my website.

    I go to my magento pages and want to insert an image. The box comes up but the browse button doesn't work.

    Thank you for your answer but it hasn't helped. I am trying to browse my own computer's files of photos for an image to upload to magento. The browse button doesn't do anything. This is the first version of Firefox I have used (#23). I am trying to see if Firefox will work better for my business than other browsers. So my cache is pretty empty just magento and magento help.
    When i scroll over the browse button this message appears at bottom (I took a snapshot of the screen):
    javascript:openBrowser('srcbrowser','src'...advanced_image_image_browser_callback');
    When I click browse it goes to photos uploaded already with this code across the top: https://harmanscheese.com/js/tiny_mce/plugins/advimage/image.htm

  • Can we use PHP with Portal.

    Hello !
    Can we use PHP with oracle portal.
    Can we make portlets in PHP and use it in oracle portal.
    If yes then how .
    Any kind of help will be appreciated .
    Regards
    Seemab

    thank U marianfromspringwood..
    one more doubt please tell it clearly,
    i had bought ipad 2 wifi 3g 32gb  AT&T model from sanfrancisco, do i need to activate my ipad2 in america it self
    by AT&T ,or can i activate it in india with airtel,vodafone,bsnl,idea,etc gsm service provider. and weather my ipad2 wil work correctly in india, and if i have any problem in future then can i get assistance from india only or should i send it to america..............??

  • I have lost my iphone5,how can i locate it?

    I have lost my iphone5,how can i locate it?

    Not is this forum.
    http://www.google.com/search?q=find+my+iphone

  • I have an IPhone 3; when i checked my messages earlier some had been deleted. Upon looking at the settings i noticed my message settings have changed! I no longer have the option of how long to keep my SMS messages etc. Can anyone help?

    I have an IPhone 3; when i checked my messages earlier some had been deleted. Upon looking at the settings i noticed my message settings have changed! I no longer have the option of how long to keep my SMS messages etc. Can anyone help?

    The iOS settings for the iPhone 3 never had an option to determine how long you wanted to save messages. That settings is new to iOS8. As far as some being deleted, there is nothing about the phone that should delete messages without some user intervention. Try a reset on the phone, this will not affect your data. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.

  • How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?

    How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
    I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
    Someone, Please help

    Hi Allen,
    Is there any way to store the back up to Mac and restore after formating?

  • I have finally figured out how to export an iphoto album so that I can maintain the proper order of the photos after burning the file. How do I keep each individual photo title and description after exporting and burning?

    I have finally figured out how to export an iphoto album so that I can maintain the proper order of the photos after burning the file. How do I keep each individual photo title and description after exporting and burning?  Presently after exporting and burning each photo is identified by the file name rather than each individual title description.  

    File name and Title are not the same thing.
    Filename is attached to the Jpeg file in the Finder.
    Title is attached to the photo within the Jpeg file - as is the description. These are written to the Exif and IPTC metadata on export.
    So: File -> Export. Kind: Jpeg or Tiff and Check the box at 'Title and Keywords'. This will write the Title, keywords and descriptions (though not explicitly stated) to the metadata. This can then be viewed in any app that understand this material.
    You can choose, if you wish, to also use the Title as a Filename - that's an option at File Name
    Regards
    TD

  • Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number:  *********

    Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number:  *******
    <Edited by Host>

    Hello Khayalh,
    You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively. 
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Regards,
    -Norm G. 

  • HT2361 I have a Sony DCR-HC20. Can I use this with iMovie? How do I down load my videos?

    I have a Sony DCR-HC20. Can I use this with iMovie? If not, How do I transfer to My computer, and what would I use?

    http://esupport.sony.com/US/p/support-info.pl?info_id=1192&mdl=DCRHC20

  • I bought an iPad and an iTunes card, I want to buy an application from the Apps store but it only gives me the option of credit card.  How can I buy Pages with my iTunes card to my iPad? thank you

    I bought an iPad and an iTunes card, I want to buy an application from the Apps store but it only gives me the option of credit card.  How can I buy Pages with my iTunes card to my iPad? thank you

    Have you redeemed your iTunes card to an account associated with an Apple ID?
    Once you have your iPad associated with an Apple ID AND you have an account with a credit card associated with the same Apple ID AND you have some 'store credit' (from redeeming your iTunes card) then purchases use the store credit before they charge the credit card, so you should be ok!
    Personally, I use 'store credit' as a way to monitor whether or not there have been any 'unauthorised' purchases because as soon as the store credit is zero, the security code from the credit card is needed for further purchases!  It does mean that I have sometimes to top up store credit before making a purchase, but 'better safe than sorry'! 

Maybe you are looking for