HT201407 I've done this and still not workin
I got a iPhone 4 for Xmas I've tried to active ate it but it's saying please try again I've restored it and all that stuff but still not working what should I do ????? :(
what do u mean not working like the device isnt starting up
Similar Messages
-
I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?
I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue. -
my phone has been losing calls and according to the apple store i need to reset it due to a software fault - i have done this and still have the same problems. how do i reset the phone without reinstalling the soft ware fault by way of icloud backup
Well, it appears that your backup is corrupt, thus causing your issue. So, you'll have to restore as a new device, & not from backup. Follow this by syncing your content back to your phone:
http://support.apple.com/kb/ht1414
Do not restore from backup. -
how do you unlock your ipod..we have tried different passcodes and now is is saying to plug into itunes...guy at the apple store said to plug into itunes too...
we have done this and still nothing....thanks still wont unlock..Do as the manuals says to do and restore the ipod.
If you are unable:
iOS: Unable to update or restore -
my phone wil not turn on after trying to update now all it de si tell me to plug into itunes which i have ready done and still nothing happens can you help
Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time.
-
I have installed itunes, but when connecting the iphone, ipad or ipod it states the following:-
Connot be used because required software is not installed run itunes installer to
remove itunes, then install itune again.
I have done this on a number od times, but still having the same message coming up.
Please can you help me.
Kind regards
Caroline JonesLet's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
ITunes match after two days and still not workin
It has been two days since i started the match process. I am about 1/5th of the way through Itunes searching my library (the first step) and it doesn't get past that. I have firced quit, restarted and reinstalled itunes and still the same issue. This is a bumber since i have already been charged for the service but have not been able to use it.
Has any one else been through this? To have itunes match not get past the first step and just freeze?
Any and all help would be great!
Thanks,
JeffI have had the same problem. Here's my experince so far and the latest progress I've made:
- I have my music spread across my iPod (70Gb), MBP (small amount of music), and another Nano. Not all sync'd automatically, as I like diffeent stuff on different places. Most of it is music that I brought in to iTunes from my own CD collection, the rest is purchased via iTunes.
- If I leave my iPod plugged in while Match is running - it never, ever completes. Tried this over Christmas and left it 9as others have) for several days. Craps out every time. Even if left for days "apparently" doing something. It never gets beyond Step 1 of the match process, and tiehr spins forever, or ultimately craps out with an iTunes error number.
- When I disconnect all iPods - hey presto - it works. It completes steps 1,2,3 of the process. Of course, this means it's only doing the library that's on the MBP for now.
- My next step is to re-connect the iPods (one at a time) and see what happens. Will report back when I've tried this.
Sean -
I'm having trouble downloading the newest version of itunes keep getting error message any suggestions?
What's the precise text of that message, please? (There's a few different ones I can think of that you might be getting.)
-
Multimedia Audio Controller not working..... have installed updates and still not workin
Can someone help me with my multimedia audio controller? I've initially installed the updates from the support page and after reboot the Xi-Fi driver is listed. After installed the console update programme for Xi-Fi extreme music the driver is gone and I get a "Multimedia Audio Controller" instead with a error message.
No matter how many times i try reinstalling and uninstalling it doesn't work.Hi:
Click on the link below. Accept the agreeement. Download, unzip and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownT... -
i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.
You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0. -
TS3074 what do you do after you have done all of this and still have not resolved the issue?
what do you do after you have done all of this and still have no resolved the issue? itunes still will not load, or reinstall. i have updated my computers OS to the posted above settings for Vista. still gives error code 1114. NOTE!: My itunes WORKED JUST FINE UNTIL a new update was ready for download yesterday afternoon.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
My brand new iPad mini won't rotate done factory reset still not working. If I lock and unlock on landscape or portrait it remains in that mode. Any ideas pretty sure I've tried everything suggested such as off/on, reset, reboot, double checked lock off. It did work and I changed wallpaper and stopped motion, not sure if this related
Reset all settings. Settings>General>Reset>Reset All Settings. Your iPad will reboot on its own. You will have to enter all of the device settings again, but no data will be lost.
I eould not spend a whole lot more time trying to fix this, if the device is really brand new. I would take it back to where you bought it, bring the box, the charger, the cable and your receipt and if they can't get it fixed, return it and get another one. -
Signed up twice for adobe pdf export to word and still not working - anyone else have this problem?
signed up twice for adobe pdf export to word and still not working - anyone else have this problem?
In XI.
I can’t just export to word as I have done in the past in one simple click.
Convert to button is greyed out.
Now I have to save the pdf file on c drive when I am in outlook…then goto export pdf file…then find file then export to word.
I bought new computer with windows 8 (which is awful) and then bought pdf export again…
Any thoughts on how I can get back to one simple click again when I open a pdf file from an email in outlook?
Thank you,
Mike -
When I try to purchase new app or update apps on iPad it tells me user name is disabled. I have done all the "tricks" from the tech support on phone and still not working.
Contact Apple Support
https://expresslane.apple.com/GetproductgroupList.action
Apple ID: "This Apple ID has been disabled for security reasons" alert appears
http://support.apple.com/kb/ts2446
Cheers, Tom -
family sharing. i have set my wife up on family sharing and each time we try to download a book or an app, we are requested that i update the payment details. I have done this and we still cannot share.. what do i do or how do i update the payment details to enable my wife to download
Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.
Maybe you are looking for
-
C# Script to copy an Excel File working locally but not on the server when I schedule a job
So I have these couple C# commands to copy an Excel File which works fine and dandy on my local client when I test and run this SSIS Package but when I tried scheduling the job on the server, it failed. These are the couple C# commands... // This Ope
-
Is it possible to import SAP IDOCS (e.g. ORDERS05) in B1? Is extra software needed?
-
How do I read tarball files in java ? I tried using the java.util.zip classes but only managed to read zip-files but no tar-files ?
-
Software upgrade on I mac maverick to Yosemite , locked up? Help
I Am upgrading to Yosemite from maverick i mac 27 flash hard drive 1 year old it has been going 13 hours and seems to be locked up ive tried turning off and on, it just opens and there is a progress bar that is stuck at 1/3
-
hey, i got a new c6. i need to lock my phone with a security code, and i have set a code also. however when i lock, it does not ask for the code to unlock it. i need to know how to do it. in both the slider and touch screen variations. and also when