HT201407 Iphone 4 wont activate after i0s7 update, please help!!?
Iphone starts up but with 'no service' and it says it cant be activated because the server cannot be reached. What do i do!?
I have the same problem. I have just erased my iPhone 4S after requesting it be unlocked by my carrier. Now I want to restore from backup and the iPhone has a message
"Your iPhone could not be activated because the activation server cannot be reached..."
Maybe its a genuine problem with the activation server???
Similar Messages
-
HT4623 what do u do if your iphone wont activate after u update it
what do u do if your iphone wont activate after u update it
You contact the carrier it's locked to and see if they will unlock it for you. Activation problems are almost always due to the fact that the phone was hacked to unlock it instead of being legitimately unlocked.
Of course, this can also happen if you're trying to activate it without a SIM in it. You can not activate the phone without a SIM. -
My iphone 4s cant activate after i update the ios to 6.0.1, always shows this message " Your request couldn't be processed" we are sorry but there was an error processing your request, Please try again later........please someone help me???
It sounds a lot like your phone was jailbroken or hacked to unlock it before you updated.
Was it? -
Iphone could not activate after software update
iphone could not activate after software update (iSO5). it reads, on itunes, "there is no sim card on the iphone", even though there is one in the phone. i tried taking the sim out and re-inserting it, but the same problem still repeats. Anyone to help?
Is there a sim in the iPhone?
Has the iPhone been jailbroken or modified to work with other
than the original wireless provider?
If you can get that far, what does it say when you look at
Settings=>General=>About=>Carrier? -
3gs wont activate after latest update
My Iphone wont activate after the latest update was installed, even when connected to Itunes it just say disconnect and install sim card, even though there is a working sim in the phone, any help would be gratfull.
"We're Sorry, Activation Server Temporarily Unavailable, contact Customer Care...Your request Could Not Be Completed?"
99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
So, you need to get a sim card from the carrier the phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked. -
Usb port not working after yosemite update please help
ive got an early 2011 macbook pro i5. and one of my usb stopped working. if i reset my computer it works for a while and then stops again. all these after yosemite update please i really need help on this.. and also when ever im in the middle of something it keeps crashing and saying these things below after i booting back up. ive tried several things, didnt work, tried repairing disk permissions. please anybody with any idea help me!
Anonymous UUID:
CCC4DCA9-48E9-4692-250B-488588FCC69E
Sun Nov 9 17:58:17 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff802a005eb2): "Possible memory corruption: pmap_pv_remove(0xffffff803b8db998,0x7fff7360f000,0x6d654, 0x6d654d64, 0xffffff8031663cc4, 0xfffffeb38ae0f078): null pv_list!"@/SourceCache/xnu/xnu-2782.1.97/osfmk/i386/pmap_internal.h:768
Backtrace (CPU 0), Frame : Return Address
0xffffff8031663b80 : 0xffffff8029f3a811
0xffffff8031663c00 : 0xffffff802a005eb2
0xffffff8031663cf0 : 0xffffff802a0065e5
0xffffff8031663d50 : 0xffffff8029fb6b4a
0xffffff8031663e60 : 0xffffff8029facd2c
0xffffff8031663e90 : 0xffffff8029f5c747
0xffffff8031663ed0 : 0xffffff802a3c45ff
0xffffff8031663f40 : 0xffffff802a3c425c
0xffffff8031663f50 : 0xffffff802a44dcb2
0xffffff8031663fb0 : 0xffffff802a03ac46
BSD process name corresponding to current thread: suhelperd
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:
0x0000000029c00000
Kernel text base: 0xffffff8029e00000
__HIB text base: 0xffffff8029d00000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 7052072843826
last loaded kext at 6483411185500: com.huawei.driver.HuaweiDataCardActivateDriver 1.0.12 (addr 0xffffff7fac6ba000, size 16384)
last unloaded kext at 6604174049015: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7fac717000, size 16384)
loaded kexts:
com.huawei.driver.cdc_ncm 2.7.2f16
com.huawei.driver.dc_net 1.0.2
com.huawei.driver.cdc_acm 2.6.2f17
com.huawei.driver.cdc_usb_bus 1.0.3
com.huawei.driver.HuaweiDataCardDriver 4.25.45
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AGPM 100.14.37
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleMikeyDriver 266.5
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.ApplePolicyControl 3.7.21
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelHD3000Graphics 10.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0
com.apple.driver.AppleBacklight 170.4.12
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOSurface 97
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: MacBookPro8,1, BootROM MBP81.0047.B04, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 2 incoming serial ports
Serial ATA Device: ST9320325ASG, 320.07 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: Hub
USB Device: HUAWEI Mobile
USB Device: IR Receiver
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, 20080d.0I have the same problem when I updated to OS X 10.10 I lost both my USB ports as far as they will not recognize anything that I plug into them. The power part of the USB seams to work since it will recharge my Striiv Touch but nothing shows up when you connect anything to the ports.
I have tried a number of things from rebooting, trying other usb devices that work on other systems with no problems but will not work on my Macbook Pro.
Any Help out there?
Hardware Information: ℹ️
MacBook Pro (Retina, 15-inch, Late 2013) (Verified)
MacBook Pro - model: MacBookPro11,3
1 2.3 GHz Intel Core i7 CPU: 4-core
16 GB RAM Not upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:43:41
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad -
hello! I updated to ios 8 two days ago and it was ok. I started using my iphone later that day and it just rebooted . Now it wont activate .
look... I start my iphone and and it goes to main LOCK screen where a message is shown, the message is "activation needed" . After I slide to unlock and write my security code it goes directly to the activation page , not to the very begging ,where you should select the lenguage but from the part where you have to chose a wifi connection . I connect to wifi and the activation process starts . On the screen is a message that tells me to wait a couple of minutes . After a couple of minutes there is another message shown on the screen where it tells me that the activation server is unreachable for the moment , please try again later . and this procedure can be repeated a hundred times and the same message will appear . It wont eaven reset . Any ideas wat is rong with it
-
My iphone 3gs wont activate after updating to ios 5
ive updated my iphone 3gs to ios 5 but now itunes wont activate my phone and comes up with a messege saying my phone has no sim inserted when it has one (original orange UK sim), what can i do to sort this out
I had the same problem with mine and found out because i bought it second hand and had it unlocked updating it causes it to go back to being locked again. If you've bought it in the same situation then maybe that's the problem, i got it unlocked really cheap too and now its back to normal and all my messges, apps and pics are back.
hope this helps -
HT1766 My iPhone wont activate after I updated my software to iOs 6.
My IPhone 3GS' software lately is 4.0.1 then I don't normally updated it, then I saw iOS 6.1.3 that's when I started to thick about updating it. Then I did so, and it works, but iPhone won't activate now.
That's because your phone is/was jailbroken.
-
Iphone 5s wont activate after resseting
helpp
i resetted my phone because i forgotten my code. now it wont activate, he cant find my wifi network and with itunes it also doesnt work because my sim is locked
what do i have to do to unlock my simcard? so i can use my phone againHello essieswijk,
Thanks for using Apple Support Communities.
From your post I understand that you have restored your iPhone due to forgetting the passcode, and now you are presented with an error that the SIM is locked. To help resolve this issue please follow the directions in the link below.
iOS: Understanding the SIM PIN - Apple Support
Have a great weekend,
Alex H. -
Tactic 3d Rage not turning on anymore after firmware update, PLEASE HELP
I tried to update my firmware and did not read the instructions carefully, I never unplugged the headset when I updated the firmware of the usb transmitter. so after that my headset was flashing blue, and it was not working, I let it drain out. but now it wont open again, I read on some forum that I could plug the headset in another power source to get it to open again, so its plugged in my iPhone 5 plug right now and still not opening. please help
Originally Posted by Yann31
I tried to update my firmware and did not read the instructions carefully, I never unplugged the headset when I updated the firmware of the usb transmitter. so after that my headset was flashing blue, and it was not working, I let it drain out. but now it wont open again, I read on some forum that I could plug the headset in another power source to get it to open again, so its plugged in my iPhone 5 plug right now and still not opening. please help
Hi Yann31,
Just a possible solution I'd like to put out there..
Maybe plugging the headset to the other power source for a longer period of time (15-30 min) might get it to work?
Sometimes trying to charge drained headsets and turning it on immediately does not work.
Or if you already did this, do you have another power source you can try troubleshooting with?
Cheers!
Philip-CL -
Q10 stuck at reboot after software update - PLEASE HELP
Hello
I was checking for software updates for my Q10 yesterday and was informed that there is a new update
I clicked on download and install, and it asked me to reboot when it was done. After that it loaded very slowly until it reached 99% 6 hours later and it remained like that for 12 hours
What I did this morning was remove the battery and sim card and I reinserted the battery, the same thing happened again and it is moving very very slowly
Can you please help?? I would rather find away in which I do not loose my BBM contacts since I have not backed up my phone...are the contacts stored on my blackberry ID or will I loose them if I reset the phone?
Thank you very muchIt finally powered on after 3 battery pulls, but now it does not make or receive calls (((
Everytime I connect it to blackberry link it says software update available, so I clicked on install, it said downloading update and then nothing happens, the download bar becomes full then nothing changes
I also tried to reload device software, i got a message saying checking repair software and it stayed like that for 3 hours then the device rebooted but nothing happened at all
I even tried redoing the software update from the phone itself 3 times, everytime it would say update successful but the phone would still not make or receive calls
Please help I dont know what to do....could the problem with blackberry link be that im using it on a mac??
I appreciate your help -
I'm using MacBook Pro 13-inch, early 2011 running 10.7.1. I want to upgrade to 10.7.4 but the system discarded the upgrade after I successfully downloaded it. Please help!
You need the Combo Update to go from 10.7.1 to 10.7.4.
-
I have no sound after HP update. please help
I have no sound, it states " no audio output device is installed"
Renia,
Apparently the issue is not on the list of issues that test program can detect. Sometimes it works -- this time it could not see the problem.
Try this:
Perform the Hard Reset . Boot the computer and log in
The procedure will not wipe out your data -- this is just a driver refresh to force the computer to read the drivers and software from the Operating System that is installed on your computer.
That may do it.
===========================================================================================
You said the problem arose after an Update. You can try "going back in time" to when the sound worked:
Restoring Windows to a Previous Point (Windows 7
Using Microsoft System Restore (Windows 8)
System Restore sometimes works better if you first drop the system into Safe Mode:
HP PCs - Windows 8 Safe Mode
===========================================================================================
You may have to resort to uninstalling and then reinstalling the audio driver.
Control Panel > set icon view > Open your Audio > right click on your audio driver > select Uninstall
Restart the computer and log in. As you do so, the driver will reinstall itself.
More tips are outlined and explained in the guides provided earlier.
Kind Regards,
Dragon-Fur -
I know there have been topics about this in the past, but I haven't found a solution to my particular case in any of them. So I'm sorry that this topic may seem redundant, but I really need help.
I have an 80GB iPod classic I bought 5+ years ago. It has been running fine for months. After I downloaded and installed the new iTunes upgrade however, when I connected the iPod it gave me the message "iTunes cannot read the contents of .... iPod. Please restore etc". I really don't want to have to restore it and lose my music, as it is almost full of music, much of which is hard to find. I don't often back up my library (I know, I know), but I have one from a few months ago I can use if I really have to (it'll be better than starting completely over), but I don't know where that would be saved on my computer. My music isn't saved in another folder so simply restoring and putting the music back into my iPod isn't an option either.
I am running Windows XP home edition if that helps with solutions.
Please help me, I really don't want to have to start my music collection from scratch.I did a mistake
Maybe you are looking for
-
Connection failed is a failed error message
In iPhoto, as well as in other software that uses the iPhoto library (e.g. setting a Desptop photo), I get the error message "Connection failed - The server "xxx" may not exist or it is unavailable at this time. Check the server name or IP address, c
-
How to open a Trade Promotion from an ABAP report/program?
Hello SDN Community, i try to open a spezific Trade Promotion to read an addional customized time_period field in a a badi. I have the promotion guid and i played around with mkt_element_read but the additional time fields are not included/transfered
-
WLCS 3.1 + WLS SP 9 --*** PORTALS Not WORKING!!!!
After applying WLS SP 9.0 our portals not working. Can anybody throw some light, PLEASE !!! **URGENT** We are getting the following Error: Sun May 06 21:24:44 GMT+03:00 2001:<E> <ServletContext-General> Servlet failed with Exception weblogic.servlet.
-
External drive not being backed up by Time Machine
I have 2 external HDDs, both USB 2. I'm using 1 for backups using time machine and one for my photos and music. Time Machine appears to backing up my internal drive but is not backing up the external data drive. The external data drive does not appea
-
Messages in Mail all Gone and Have to Re-set-up!
When I tried to access my mail, it asks for me to set-up an account, like when I first bought the computer. When I set up my account from scratch, all my mail is gone from all accounts. My service provider said that it looks like a virus and I should