HT201412 Can't get my video app to work on my iPhone it just won't open

Can some on help can't get my video app to open up just goes straight back to screen

Have you tried to force the Video app to quit and then relaunch?
If the issue affects only a single app, try closing just that app:
Press the Home button to return to the Home screen.
Double-tap the Home button to display recent apps.
Tap and hold the affected app until the red minus appears.
Tap the red minus to quit the app.
Press the Home button, then restart the app.
You can also try restarting the iPhone.

Similar Messages

  • I can't get my iBlacklist app to work on my iPhone.  Can you help?

    I downloaded the iBlacklist app from the App Store to my iPhone 4.  It looks nothing like the app I have seen on some of the You Tube videos explaining how the app works.  And of course, it doesn't work!! Am I missing something and has anyone else had the same problem?  I also downloaded the iBlacklist manager to see if that was my problem, but no it wasn;t.  They got me twice since neither app works.

    You're going to have to talk to the developer. I can't say I'm surprised, though. Ratings on the app store are pretty much universally bad. 237 1 Star ratings out of 258... 21 people, less than 1% gave it better than a 1 star rating.  That should have been a clue.

  • TS3274 I can not get my video button to work

    I can not get my video button to work, it will not response when I try to use it

    Try sliding the words up or down to select the various modes.

  • How can I get an external microphone to work on an iphone?

    How can I get an external microphone to work on an iphone?

    Japib is correct.
    WHAT happens? Exactly.
    Also helpful would be to tell what event preceded this behavior - added App, update iOS, etc.
    Quoted from  Apple's "How to write a good question"
       To help other members answer your question, give as many details as you can.
    Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
    Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
    Describe the problem, and include any details about what seems to cause it.
    List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
    ÇÇÇ

  • I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

    I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • I can not get my apple Id to work on my iphone 4s

    I can not get my apple ID to work on my iPhone 4s. It keeps telling me my billing information is wrong.

    Have you tried signing out and back in? Go to Settings > Store. Select your Apple ID and then Sign Out

  • HT1338 HOW CAN I GET MY BLUE TOOTH TO WORK ON MY IPHONE 4

    HOW CAN I GET MY BLUE TOOTH TO WORK ON MY IPHONE4

    Your bluetooth what...?  Its impossible to give any help without knowing what sort of device you are trying to pair with the iPhone.
    iOS supports the following bluetooth profiles - http://support.apple.com/kb/HT3647

  • How can I get a video from my iMac onto my iPhone Camera Roll

    I recently bought a Go-Pro, and make time lapse videos, but those are made on my iMac, and I want to transfer them to my iPhone's Camera Roll.
    I can easily get them in the "Videos" folder, but problem is, I want to upload them to my Instagram account, so they have to be in the Camera Roll.
    I read a few other topics that suggested using "DropBox" which I tried, but when I try to save the video on my phone, it either says "Exporting" for a few minutes then an error, or it says this type of file cannot be saved. Its a ".mov" file.

    Copy Photos Between iOS Devices
    http://tinyurl.com/cnz95bc
     Cheers, Tom

  • Can't get the video camera to work with iOS 7

    Since I updated to iOS 7 I cannot get the video part of the camera to work. I can't even activate the button.

    Swipe up or down to select video option.

  • HT201412 What happens when the video app quits working?

    How can I fix my iPad 2 video app when it quits working properly?

    Try the following:
    - A reset. Nothing is lost
    Reset: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPad.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • Can I get the free apps made by Apple on iPhone 4 if I restored my phone?

    I have my iPhone 4 and then I saw on Apple's website that they will make their apps they made free (some of it may include iPhoto, iMovie, Notes,Garage Band, Pages and Numbers) . But then I found out that only Phones purchased on September 1st 2013 are the ones who can get the free apps. I purchased my phone on January 2013, And I want those apps greatly BADLY but I don't have credit card to purchase it. You think If I restore my phone, I can get those apps for free?

    NO

  • Can't get the mobile app to work

    I am asked to put in my mobile number which I do.
    It says couldn't find my pin. But it also says it has sent the pin,which I don't receive.
    Solved!
    Go to Solution.

    I have downloaded the mobile app,but cannot get it to work.
    I follow the institutions but no luck.
    I just won't work.
    I now think the problem may lie with. Bt
    As quite unexpectedly Bt sent me a message
    saying there. was a fault and it would be fixed by Monday Pm
    Thanks for your help
    If no joy from Bt I may come back for help

  • When in iMovie I can't get to iDVD.  I try share and iDVD, but it won't open.

    I am having trouble burning a DVD from iMovie.  My project is selected, prepared, and then nothing happens.  For whatever reason iDVD will not open.

    You can still get it, just not from Apple. If you buy it somewhere like Amazon or eBay make sure that you get the old version http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U TF8&qid=1362780369&sr=8-1&keywords=iLife

  • Can't get the desktop app to work - forced to sign out and it shuts down

    I was unable to install the most recent update for Adobe Story, so I uninstalled the app, went online and re-downloaded. Now, when I try to launch I get an error that user preferences weren't found, and it forces me to sign out, so I can't work offline.
    I've tried a system restore, but it did not fix the problem. At this point, I am unable to use Adobe Story on my computer, just online.
    Please help me fix this.

    I solved this myself by creating a second Adobe ID, sharing my project files with myself under the new ID.
    The app works with the new ID I created.

  • [SOLVED] Can't get xf86-video-r128 to work...

    Hello! Arch newbie here, so far bumpy, but so far so good. Currently posting from TWM for kicks...
    Anyways, my old junker of a computer was where I installed arch, so I could get a hang of it. The graphics card is a ATi RAGE XL AGP 2X... having no luck with xf86-video-ati, I installed xf86-video-r128, and got graphics working for the first time in arch. Hooray!
    Unfortunately, I can't seem to get my monitor's native resolution of 1280x1024. If I try, the monitor refuses to display, and errors out with "Out of Range". I know it's definitely possible, since other linux installations have auto-configured it so far. So, I'm wondering what I need to modify in xorg.conf to get 1280x1024 working.
    It seems like a refresh rate problem, but when I looked over the file, I noticed that "Driver" was set to "vesa". Changing it to "r128" did nothing, as the X server refused to start because it couldn't find any devices.
    I will post my xorg.conf shortly.
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "glx"
    Load "dbe"
    Load "dri2"
    Load "dri"
    Load "record"
    Load "extmod"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Jean"
    ModelName "Unknown"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "ShadowFB" # [<bool>]
    #Option "DefaultRefresh" # [<bool>]
    #Option "ModeSetClearScreen" # [<bool>]
    Identifier "Card0"
    Driver "vesa"
    VendorName "ATI Technologies Inc"
    BoardName "Rage XL AGP 2X"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1024x768" "800x600"
    EndSubSection
    EndSection
    Section "ServerFlags"
    Option "DontZap" "False"
    EndSection
    As you can see, the Modes section under 24-bit depth doesn't have "1280x1024", but if I add it in, the X server will default to it (correctly), but I won't be able to see anything.
    Last edited by kareeser (2009-05-30 21:25:23)

    Karol, thanks for replying so quickly
    I tried your suggestion to replace "vesa" with "ati" in the "Driver" line. X failed to start, but for some reason, there was some leftover code in xf86-video-ati that caused it to look for the mach64 driver... which as I understand, used to be installed with xf86-video-ati, but no longer... hrm! A quick "pacman -S xf86-video-mach64" later, I now have a working 1280x1024 resolution. Excellent! Changed the DefaultDepth to 16, and now my system is nice and zippy.
    A similar problem is that I still cannot get 1280x1024 in vc1. In /boot/grub/menu.lst, I have "vga=773" added, but that's as high as I can go, vga=775 won't work with the same reason above.
    Small problems in the grand scheme of things. I'm glad the main issue is solved
    Last edited by kareeser (2009-05-30 01:34:01)

Maybe you are looking for