HT201412 FaceTime not working between ipad2 and iphone4

Connects but not transmitting picture from iPhone to Ipad

Abpd08-
It sounds like you are having a problem with the WiFi link(s).  For each iPad, unplug the WiFi router for a few seconds.  Then reset the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  You will need to reconnect the iPad to WiFi.  (If both iPads use the same WiFi router, you only need to unplug it once.)
Fred

Similar Messages

  • Facetime not working between USA and Thailand

    Facetime does not work between my iPhone4 and new iPod Touch via USA and Thailand but works fine locally.

    Abpd08-
    It sounds like you are having a problem with the WiFi link(s).  For each iPad, unplug the WiFi router for a few seconds.  Then reset the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  You will need to reconnect the iPad to WiFi.  (If both iPads use the same WiFi router, you only need to unplug it once.)
    Fred

  • Photo Stream not Working w/ipad2 and iphone4S

    Photostream has been working fine and now I am not getting photos taken with my iphone to transfer to my ipad photstream.

    Welcome to the Apple Community.
    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
    Photostream only syncs when the camera app is closed, ensure it is closed.
    Photostream only syncs when the battery is above 20%, try recharging the device
    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
    Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

  • HT203782 Airplay is not working between ipad2/iphone5

    Airplay is not working between ipad2/iphone5 and apple TV2.  When I try to use airplay with my iPad 2 or ipad5, I can hear it, but the video won't show.  I even tried to just mirror the screens and still nothing.  It does work with my macbook air.  I've tried resetting everything with no success.  What should I do?

    Are you sure the site you are trying to view isn't blocking AirPlay.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.
    If you are still having problems, the following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • My iMessage is not working between mine and another's iPhone. What can I do to fix it?

    My iMessage is not working between mine and another's iPhone. What can I do to fix it?

    What does not working mean?

  • Facetime not working between wifi ipads

    Hi please help...
    I have 2 wifi ipad2.   Facetime between those ipads used to work fine, but slowly the connection got spotty, and now it does not work at all.
    When trying to call via FT, you can see the other side only as a freeze frame, not audio pass through at all.  Sometimes it will just say fail.
    Any one have experience with this problem.
    Any suggestions? please?
    Thanks!

    Abpd08-
    It sounds like you are having a problem with the WiFi link(s).  For each iPad, unplug the WiFi router for a few seconds.  Then reset the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  You will need to reconnect the iPad to WiFi.  (If both iPads use the same WiFi router, you only need to unplug it once.)
    Fred

  • Home sharing not working between itunes and apple tv, I've read all help articles I could find... still nothing

    Hey there!
    Here's every detail of the problem:
    1- My iTunes (10.5.2) doesn't give me any options for apple tv in any menu. Some troubleshooting article I remember said something like «go to Settings - Apple TV - Always Search for Apple TVs» or something like that, yet my itunes settings have NOTHING for Apple TV.
    2- Following all setup instructions and usual troubleshooting solutions, i KNOW that all options and settings available to me are set correctly and everything  should work normally, yet my iTunes shows no recognition of my Apple TV AND my Apple TV «Computers» menu is nothing but a «Home Sharing is turned on, make sure that all Home Sharing devices are using the same Apple ID account» message.
    3- Of course, yes, all my devices ARE setup with the same Apple ID account, with Home Sharing turned on everywhere. Also I'm not using a Firewall, and none of my devices have any trouble connecting to my one and only router, all at once.
    So I figure the main problem is my itunes acting like Apple TV doesn't exist. Any ideas/solutions?
    Thanks in advance.

    Sharing Stopped working again over night.
    I went to Apple Support Artical TS2972
    As soon as I did this Home Sharing started working
    http://support.apple.com/kb/TS2972
    Firewall Section
    5. Check Firewall Settings
    If you have a firewall enabled in your router or computer, make sure that the firewall is not blocking communication between your computers. Home Sharing uses TCP port 3689 and UDP port 5353 to communicate with shared iTunes libraries.
    In addition, Apple TV and Mac computers will use port 123 to set the time automatically. Incorrect date and time on either the computer or Apple TV can cause errors for Home Sharing and connections in general.
    If you are unsure whether your router has a firewall or the required ports open, test additional devices or another network to help isolate the issue. If the devices tested work on another home network, it is your router or network configuration.
    For Mac OS X, you don't have to edit the port addresses, but make sure the firewall in Apple () menu > System Preferences > Security > Firewall are not set to:
    Block all incoming connections
    Allow only essential services
    If you use another security/firewall software on your computer or router, follow this article or contact the manufacturer or check the documentation on how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
    It made sense to me, but its still puzzling me after restarting a router would (in my first attempt) resolve the issue for a day.  This this time I applied the port forwarding TCP and UDP ports and saved the settings in the DLink DIR-655 and both my iPad2 and iPhone 3GS were now again finding the share. My ATV2 is also now accepting the Share.
    Tommorrow will be the true test.

  • Home sharing not working between mac and pc, but it is fine between mac and mac. Help!!!

    Good Evening Dear Gurus,
    Hi, I am writing this to ask for help regarding home sharing. Yes I do know they are several threads out there that already explains or rather given solution on how to tackle this problem. BUT the my problem is rather different. I am no computer expert myself, so here is the problem, apparently MY MAC can home share with another MAC, but both of this MAC cannot home share with the PC.
    Does anyone encounter this kind of problem before? Can anyone help a poor guy out? Thanks in advance. love to hear from the community soon!
    Thanks!

    Sharing Stopped working again over night.
    I went to Apple Support Artical TS2972
    As soon as I did this Home Sharing started working
    http://support.apple.com/kb/TS2972
    Firewall Section
    5. Check Firewall Settings
    If you have a firewall enabled in your router or computer, make sure that the firewall is not blocking communication between your computers. Home Sharing uses TCP port 3689 and UDP port 5353 to communicate with shared iTunes libraries.
    In addition, Apple TV and Mac computers will use port 123 to set the time automatically. Incorrect date and time on either the computer or Apple TV can cause errors for Home Sharing and connections in general.
    If you are unsure whether your router has a firewall or the required ports open, test additional devices or another network to help isolate the issue. If the devices tested work on another home network, it is your router or network configuration.
    For Mac OS X, you don't have to edit the port addresses, but make sure the firewall in Apple () menu > System Preferences > Security > Firewall are not set to:
    Block all incoming connections
    Allow only essential services
    If you use another security/firewall software on your computer or router, follow this article or contact the manufacturer or check the documentation on how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
    It made sense to me, but its still puzzling me after restarting a router would (in my first attempt) resolve the issue for a day.  This this time I applied the port forwarding TCP and UDP ports and saved the settings in the DLink DIR-655 and both my iPad2 and iPhone 3GS were now again finding the share. My ATV2 is also now accepting the Share.
    Tommorrow will be the true test.

  • WCCP does not work between WSA and ASA

    I have configured WCCPv2 between WSA S160 (         6.3.1-025) and ASA5540 (8.2(1)109).
    Everything seems to be OK by "show wccp *" on ASA and showing wccp debugging messages (level 4) on S160. Despite of it, WCCP redirection does not work.
    If I use packet-capture I figure out that S160 receives GRE packets with TCP SYN from particular LAN host to WWW sites but S160 does not handle them and does not send anything back to ASA.
    It is an Exempt from authentication for this LAN host and in Forward proxy mode everything works well.
    I have attached an example of a packet-capture (S160.txt - renamed from .cap) and debugging messages from S160 & "show" from ASA.
    Does anybody have any idea what the problem is and how I can resolve it ?

    IronPort Support team helped me to find the trouble:
    If I wish to handle specific port's (80, 8080, etc.) traffic by the transparent proxy I need to configure this port like a listener for the FORWARD proxy
    ("Security Services" -> "Proxy Settings" -> "HTTP Ports to Proxy")
    The WSA guide doesn't clearly say about it.
    So the Discussion can be closed ...

  • Group Messages Not Working between Android and iPhone Users on iOS7

    Hi there,
    I am a former iPhone user.  I recently converted both my line and my wife's line from the IPhone 5 to a Motorola X Android phone.  We kept our same phone numbers, but we completely switched from Verizon to AT&T.  I have noticed that text messaging works perfectly on an individual basis when I correspond with individuals who have the iPhone, but Group Messaging is not working correctly.  I am able to send messages to a group and they receive them just fine, but when they respond back to me, I do not receive their responses (as it appears they are going through as iMessages).  My wife is having the same issue on her phone.  After doing some detective work, I have found that hundreds of other users are having the same issues on their smartphones when they make the switch from an Apple product to an Android phone.  There are a variety of "bug fixes" listed on the web, but I have completed all of them and I am still having the same issue.  Here is what I have done so far...
    *Factory reset both of our phones and removed the SIM cards (since we are with a new phone carrier)
    *Changed both of our apple ID passwords
    *Removed both of our phone numbers from Apple's database all together
    *Unregistered both of our iPhone products with Apple
    *Had all of my friends/family switch SMS to "On" in their Settings tab
    So now what?  I read one post on an Apple forum that said that they are aware of the issue and we can expect a fix in a future iOS update...but when is that going to occur, if at all?  It is problems like these that led me to leave Apple all together, and here I am after having left the company, and I am still left high and dry searching for solutions to my problems.  Who can help, and how can I remedy the situation?
    Anything you can provide to help out would be great.
    Thanks.

    There are reports of iOS7 altering the settings on iMessage's connection to the iPhone. Verify that each of the iPhone and the Mac is receiving on the "channel" (phone number or email address) on which the other is initiating iMessages.

  • Keepalive not working between GSS and CSM

    Hello,
    We are using a KAL-AP keepalive between GSS and CSM for our global application. One problem we are facing is that the KAL-AP messages (UDP 5002) for VIP status are sent from GSS in one data center to the CSM in another data center. However the response from the CSM takes more than 40 seconds and by that time the firewall in between has already removed the connection. We don't see the same latency issue when we use utitlities like ping, traceroute etc between these 2 devices.
    The communication between all other GSSs and CSMs in different data centers is fine.
    Regards,
    murtaza

    Run
    show mod csm capp udp detail
    periodically and check if the send & recieve frames are incrementing..

  • I message is not working between me and my friend

    When I try to message my friend it says next to my message "This imessage could not be delivered". For my friend it says "This person is not regesterd with imessage". imessage worked great between my dad and I but with my friend and I we are having these problems. Any help?

    TS4268 read this article and see if this corrects your problem. Enter TS4268 at the top of page in the search window next to the support link.  Good luck!

  • Continuity not working between iPad and iPhone

    I have an iPad Air and iPhone 5 S. Both have been upgraded to iOS 8 and both are on the same wifi network. I do not get any notification of incoming phone calls on my iPad when my iPhone rings. As well there is no option in the wifi settings on my iPad to activate the personal hotspot on my iPhone.

    Alright. It's convoluted, but it works.
    Settings>iCloud. Sign out on both devices.
    sign back in to your apple I'd with your original email address: NOT YOUR @me OR @icloud ADDRESS.
    once those are done, go down to settings>FaceTime. Make sure the apple ID signed in is the same Apple ID that you just used. Again, not your @me or @icloud address.
    lastly, there should be a toggle in FaceTime settings for both that says "iphone cellular calls". Switch it on. If it's not there, reboot your devices and try again!

  • Airdrop does not work between Mac and iPhone

    Hi,
    i have an iMac 27" late 2013 with OSX 10.10.1 on it and an
    iPhone 5s with iOS 8.1.1 installed.
    Both have WiFi and Bluetooth turned on.
    The iPhone can see all other iPhones around me but neither my iPhone nor alle the other iPhones can see my Mac and visa verse.
    I could not yet test if the Mac is able to see any other mac in Airdrop because i have no other Mac around.
    I already did a PRAM reset but that did not help.
    Any suggestions?

    I think you have to be running the same OS on those two devices in order for AirDrop to function properly.
    Aidrop is pretty much usless unless you are in a need to transfer files between your macbooks and iMacs and vice versa; how many average OS users have two macbooks or two iMacs????
    But that's why a great number of Apple users would like to transfer their stuff from their iPads and their iPhones to their Macs every day. I really hope this is on the to-do list by Apple, otherwise it would be shame not to have Airdrop that is cross-platform functional.

  • Calender does not work between IOS5 and IOS4.3 iPad

    We have two iPads. One is unfortunately on IOS5 and the other is on IOS4.3. When i activate the calender on both devices the shared calender is seen on the IOS4.3 iPad but not on the IOS5 iPad. Whatever i try using google accounts or iCloud it only works one way. Seems like another bug in IOS5? The CalDav fucntion that is proposed on multiple answers does not seem to work at all on the IOS5 iPad, it simply does not accept the password. Is there a simple way out? Or would i need to upgrade the second iPad also to IOS5 as i cannot downgrade the first iPad back to IOS4.3?
    help...

    The iOS 4 device will not be able to use iCloud, of course.
    As to Google calendars, I found that there's something different about how Calendar works in iOS 5.  I had a couple Google calendars that I was subscribed to in iOS 4, but when I upgraded, those calendars stopped updating, and I could not figure out for the life of me where those calendars were defined.  I ultimately had to remove them and then re-add them in Settings > Mail, Contacts, Calendars.  Click Add Account, and if you only want a calendar, click Other, then Add CalDAV Account or Add Subscribed Calendar.

Maybe you are looking for

  • How to have 2 different ipods on one itunes..

    For the longest time i've been the only one with an ipod in my family, so I just imported through my main music library. Now my sister has an ipod, and I need to know how to make it so we can have seperate song folders that won't sinc eachothers musi

  • Loop while is not visible

    Hi All, In SWDD (Every step type that can be inserted  )are visible but loop while is not visible.What could be the possible reason?Please let me know. Kind Regards, Anshu Kumar

  • Attach a PDF in SAP mail

    I have a PDF document and send as Email using fm SO_NEW_DOCUMENT_ATT_SEND_API1. How do we attach a pdf which is saved on hardisk to sap mail ? Thanks in advance.

  • Using TCP or shared variable for data transfer

    I am trying to send a large amount of numbers from a real-time module to a host computer.  These numbers have been arranged into a large array, such as an array with 10s of thousands of points.  The time critical portion of getting the information ha

  • Is this the best way to test a prime number?

    Ok so I think I finally got my program to work. I tested It with very big 8 digit prime numbers if that means anything. here are 2 Questions about my program" -Is this a way of finding prime numbers? (does the program fulfill its purpose?) and Second