HT201412 Help - My iPhone 4 will not charge! Jenny

Can anyone help me? My iphone 4 will not charge!

try using difrent plugs and chargers because you might be using a bad one

Similar Messages

  • My iphone 5 will not charge

    Hi i need some help,
    My iphone 5 will not charge. I have tried 3 different cables 2 apple ones and a brand new other brand and my phone continues to show a black screen with a battery symbol with 3 small red bars. before i plug the cable in there is a plug symbol beneath the battery symbol. when i plug it in the plug symbol dissapears but the phone will not charge either via 3 different wall chargers i have used or via plugging the cable directly into usb on a computer. is it safe to say my phone is broken?

    I just had this problem on my wife's iPhone 5. She said charged for a while with the same 3 red bars... I changed another charger and waited for a while, it become normal and charging again.  Switch to other chargers, it works too.  I think it is because she drained the battery completely too long and did not plug in the connector properly...
    Good luck!

  • My iPhone 5 will not charge. Has new battery. Must be the lightening connection. Any advice. Genius told me to buy a new phone for $250. HELP,

    My iPhone 5 will not charge. Even though it will show that it is charging, it will often not accept a charge. Appears to be the lightening connection, because I can sometimes get it to work by playing with the connection point.  Phone is 16 months old. This problem has been on-going for months, and is getting worse.
    Anything I can do other than buying another new phone?

    Hey jojo-10!
    Here is an article for you that can help you troubleshoot this issue with your iPhone:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • HT4528 iphone 4s will not charge, help anyone?

    iphone 4s will not charge, help anyone?

    If the iPhone doesn't charge when connected to the power adaptor and when connected to your computer after trying another USB cable to rule out a problem with the cable being used, more than likely the iPhone has a hardware problem with the battery or something else.
    Make an appointment at an Apple Store if there is one nearby to confirm.

  • Okay, so my iphone 4s will not charge at all. I been charging it on my windows laptop, and it just stopped charging. even on the wall. What should I do? Help.

    Okay, so my iphone 4s will not charge at all. I been charging it on my windows laptop, and it just stopped charging. even on the wall. What should I do? Help.

    Wow long time ago to find a thread...
    Hold the power and home button while connected to your computer for 10 seconds. Then release JUST the power button and continue holding the home button and iTunes should recongnise the device in recovery and then hit restore and iTunes will proceed to wipe the phone and restore to the latest iOS your device can go too.

  • HT1476 My iPhone 4s will not charge. Can you help me?

    My iPhone 4s will not charge. Can you help me?

    Have you tried charging it from another computer or another wall charger?
    Have you tried another cable?
    This is a good place to start for charging problems -> iPhone: Hardware troubleshooting
    Battery does not charge from the USB power adapter
    Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
    Verify that the outlet being used is working.
    Try another USB power adapter if available.
    If no other USB power adapter  is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
    Try another USB cable if available.
    Also refer to iPhone and iPod touch: Charging the battery.

  • My iphone 4S will not charge unless the power is switched off.  How to fix?

    Hello,
    My iPhone 4S will not charge unless it is switched off.  This happened suddenly with no other symptom several weeks ago.  If I plug the charger in, while powered on, the phone doesn't appear to detect it has been plugged in and the battery icon doesn't change its display to show charging.  Charging only happens when the phone is powered off completely.
    I did some searches for this type of problem and saw it has happened to a few with earlier version iphones, but didn't see any published solutions.
    A visit to the local Apple store didn't help either as I was told had to make an appointment; can't make an appointment for awhile because out of the country and no Apple stores where I'm at.
    This is a very annoying problem.  Anyone else have this happen and have a fix?

    I got this problem solved and just want to let others know what it was.
    I followed ewdel1's advice and brought my phone in to have it looked at and sure enough, was told that this is a problem others have had and it was due to a faulty integrated circuit.  Luckily, I was able to take this in to be looked at when I did because my 1 year warranty was about to expire in a week.
    Apple replaced my 4S with a "new" phone.  The replacement looks and works good as new, so happy I didn't have to go through a hassle and the replacement was very straightforward.

  • Iphone 4 will not charge and itunes does not recogise it at all.  When I plug it in to charge it says that it needs to be restored.

    My iphone 4 will not charge when I plug it in, it will turn on but it says that it needs to be restored and will not do anything else.  When I plug it into itunes it isn't recognized at all.  I took it into the verizon store and they were not any help at all.  My phone isn't under warranty anymore so they don't care.  Please help, I had to go back to my old phone, a droid and I hate it so much. 

    its fixed!!  After posting my problem with the FROZEN ipod classic (2007) 80 gb a screen popped up with similar subjects that I did not find in my original search.  'Rich Fleming' in the community posted a suggestion to someone with a similar frozen issue and it WORKED when I tried it. 
    hold the 'menu' and the 'circle' buttons down at the same time, KEEP the pressed until the apple appears. and now it is working.  Hope this helps others.

  • My new (second-hand) iphone 4s will not charge. What do I do?

    Please help. My new (to me, but second-hand) iphone 4s will not charge. What do I do?

    tessafromberkshire wrote:
    Please help. My new (to me, but second-hand) iphone 4s will not charge. What do I do?
    Try a different charger and a different cable as a start. Does the phone turn on? If not, see: What to do if your iPhone will not turn on

  • IPhone 4 will not charge at all

    I've tried a variety of cables, wall adapters, plugging directly into the wall, a power-strip, and plugging into my computer via USB, and my iPhone 4 will not charge at all. I don't even get the charging symbol.
    HELP!

    Call AppleCare or make an appointment at an Apple store if there is one nearby.

  • Iphone 4S will not charge, error that USB device not working, found any suggestions?

    iphone 4S will not charge, error that USB device not working, found any suggestions?

    Hello Chambless,
    The troubleshooting steps below can help get your iPhone to charge.
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Cheers,
    Allen

  • IPhone 4S will not charge, what are my options

    My iPhone 4S will not charge, I've tried different cords, how do you remove the back, and could it be the battery? 

    Morning lake host,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    For troubleshooting on this, take a look at this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Battery does not charge from the USB power adapter
    Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
    Verify that the outlet being used is working.
    Try another USB power adapter if available.
    If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
    Try another USB cable if available.
    Also refer to iPhone and iPod touch: Charging the battery.
    Hope this helps,
    Mario

  • My iPhone 4s will not charge in car or truck. It would appear after research that this is a software issue with ios5. Will there ever be a patch to correct this infuriating problem?!!!

    My iPhone 4s will not charge in car or truck. It would appear after research that this is a software issue with ios5. Will there ever be a patch to correct this infuriating problem?!!!

    Mine charges just fine, as does everyone's iPhone 4S that I know. Apple even sells a number of car chargers that are certified to work:
    http://store.apple.com/us/browse/home/shop_iphone/iphone_accessories/car_audio
    Perhaps there is a problem with your charger or the outlet you're using in your car/truck.

  • Iphone 4 will not charge or connect to itunes

    Hi Guys
    My iphone 4 will not charge or connect to itunes, I just downloaded the IOS6
    Noddyoy

    Hi Guys
    My iphone 4 will not charge or connect to itunes, I just downloaded the IOS6
    Noddyoy

  • Iphone 4  will not charge until battery totally dead

    My iphone 4 will not charge until the batter is run fullly down. After the phone powers itself down automatically due to lack of charge. Then and only then the phone will take a charge. Has anyone else had this happen or know how to fix this?

    Hi,
    You probably need to do this...
    DFU Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    But Try Here First
    Frozen or unresponsive iPhone
    From Here:
    http://www.apple.com/support/iphone/basics/

Maybe you are looking for

  • Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

    Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

  • AP1522 changing parent node very frequent & 2 RAPs are creating a loop

    Hi, i have 2 issues.. i have 7 units of AP1522 installed, 2 units as RAP and 5 units as MAP. The system is up and running. i have the following problem. 1) The MESH AP changing the parents every now and than. 2) My 2 RAPs connection has been deteced

  • CRVS2010 Beta - Help Wanted for VS2010 and CR!

    I have been having a hard time getting CR to appear in the VS2010 Ultimate toolbox. I have set the target to Framework 4.0 and installed the CR4VS2010 program but the CR viewer is not showing. The problem is worsened by the fact that I am new to CR a

  • Exp & imp from unix

    Hi experts, version 10g from unix i am trying to export and import with following exp utuser/utenv@RAMUT file=techlog.dmp log=techlog.log tables=AVN_TECH_LOG rows=y imp ituser/intenv@RAMST file=techlog.dmp log=techlog.log tables=AVN_TECH_LOG rows=y B

  • Non-numeric values in analog I/O points

    I have a system with a FP-3000 controller and a series of TC-120 and RLY-420 modules. At various times I am receiving erros for non-numeric values in some of the analog I/O points. The value, as stated by Ni-FIBUS is "-1.#IND". Does any one know what