HT201412 I updated iPhone to ios6 after that phone is not switching on
I updated iPhone 4 to iOS 6 after that phone is not switching on, please help
Hi Vividhna,
If your iPhone doesn't power on, these steps can help:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy
Similar Messages
-
I have updated my iPhone 4S with ios6 but my phone will not switch on after the update
I have today updated my iPhone 4S with Ios6 but I can no longer switch the phone on, I have plugged it in just in case the battery had gone dead but this makes no difference . Is this due to the update
hi i have the problem tried hard reset but no joy
-
iTunes sent updates to iTunes on my computer .I just bought another audio book on iTunes on my computer It synced just fine but today I can not sync my iPhone to my computer to change out books and now I can't turn my iPhone side ways to make pic larger now it won't work. Please help please.
Thank You, Ruth Ann Dally 360-490\-8711
P,S
was going to try redoing iPhone but if it doesn't work I have a very useless iPhonePut the device in DFU mode (Google it) and restore.
-
I've tried many solutions they gave me but I can get Itunes to recognise my Ipod. I'm starting to get frustrated with this device,
There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
HT4623 after updating iphone 3gs to latest software phone will not activate
m
Since you didn't provide any details or what the error message is:
I'll assume that your phone was hacked or jailbroken to unlock it from the original carrier and when you updated it locked back up to the original carrier. -
Hi I am not able to have video call through Skype after software updation. Please
Welcome to Apple Support Communities
It's a known problem in OS X 10.8.5. Apple is working on a fix -
Since the new iTunes update 11.3, right after that I couldn't connect my iPod nano 7th G to iTunes. It kept showing me that it couldn't find my ipod, that I had to reinstall iTunes. I did that and still. And now I can't connect my iPhone 5 to iTunes to sync my music. Can anyone please help me ?
Hey zoelevi_13,
Here is an article that will help you troubleshoot this issue with your devices not being recognized by your computer:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
My iphone 4s is updated to ios7.1 after that it shutsown when i insert the sim.if ther is no sim it was working properly.what can i do for this
Hi Ravihara,
Thanks for visiting Apple Support Communities.
If your iPhone is not working with a SIM card inserted, I recommend these troubleshooting steps:
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
If you still are unable to resolve this issue, contact Apple support for further assistance.
From:
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/ts4148
Best Regards,
Jeremy -
Hi. i updated my iphone 4s to iOS 7.0.4 but after that, wifi is not enabled. please help in this regard.
Apple has provided a useless workaround... [http://support.apple.com/kb/ts1559]
Else the only option you have is to fight with the Apple Store "geniuses" to get a free replacement for out of warranty 4S devices. Or try a third party repair like iFixit. The wifi chip might cost you 60-80$ but it is better than paying Apple 200$.
Overheating is the culprit in 4S devices. And its been getting worse with ever successive iOS 7 update. I think 7.0.4 was the final nail in the coffin.
They are not getting my money anymore.. I've had iPhones every since they launched... but no more. Feels like a dead investment after facing this issue. I can never sell my iPhone 4S even if I want to. There have been cases where users just sold their 4S devices, the new owner updated to 7.0.4, wifi stopped working and the seller had to give a refund.
I'm basically sitting on a 650$ white brick. Hmm... I wonder if white bricks sell higher than the standard red bricks
Guess it's time for you to sign up this ongoing campaign [https://www.change.org/petitions/apple-to-get-apple-to-replace-all-units-affecte d-negatively-by-the-update-of-ios7-or-patch-an-update-that-will-remedy-the-issue s-many-loyal-customers-are-experiencing#share]
TBH, I can't get a replacement because I am in India where 4S was never launched as an unlocked device and there are no Apple retail stores. Only resellers here like Vodafone/Reliance/Airtel. But if this petition can help the one who can take advantage of having retail stores around... why not? Sign up please. Thank You. -
Ever since I updating my IPhone 4 to 5.1.1. my alert/banner does not work with my mail app. Initial startup it works but after that, it does
not work. The only way I know there is a message by tapping on the mail app and then I hear the alert and the banner shows up. Prior
to updating, it always worked. Is there a 'bug' in the system or is there something I am missing here.Yeah this was my first time connecting my phone to the computer since I went to iOS 5.0 and iCloud, so I wasn't familiar with the fact that it did not automatically create a backup on iTunes during the Sync process. Should have right-clicked on the phone device and did a manual backup.
But still, after restoring the backup from iCloud, I don't understand why data from certain apps got hosed (anything before October 2011, which was my last iTunes backup), while other apps' data appears to be fully intact. -
I erase all my iphone 5 setting after that could not activate iphone why
i erase all my iphone 5 setting after that could not activate iphone why
I just updated my whatsapp...clicked on whatsapp in appstore and now can access my whatsapp
-
I'd installed IOS7 on my Iphone 4, but after that the frontal camera didn't work, somebody knows why?
DO NOT restore all settings!!!! This will require you to call and reactive your services, rendering your phone a useless brick! You will lose all contacts, photos, etc... You need to restore your phone to its last back up. Then do the update on your computer. This will resolve your issues.
-
I have an Iphone 3GS 16gb which was working on ios 4.1.1
The phone isn't factory unlocked. I upgraded it to IOS 6.0.1 and after that i am not able
to search for networks. it shows no services.Ok thank you so much! Although I ended up taking the sim card out of my new Iphone and reinserting it into my old one it finally let me restore it! So thanks once again this really helped!
-
i cant update my iphone and i tried going on my pc on itunes and clicking check for update button but it says that "itunes could not contact the iphone software update server because you are not connected to the internet". But i checked my internet on both my pc and iphone and tried again but it still says the same thing. plzz plzz help
Were you definitely connected to the internet at the time? If you don't have iOS 5 on your iPhone then the only way to update it would be via iTunes, once updated to the latest version of iOS you'll be able to update your iPhone without connecting to iTunes "over-the-air".
Before updating however it goes without saying to Backup your iPhone, this should happen by default upon connecting your iPhone to iTunes.
Regards,
Steve -
When i update itune 10 after that i am not able to open itune i get the message This copy of itune has expireed
Here's a previous discussions that seems to have solved a similar issue in the past:
https://discussions.apple.com/message/12209861#12209861
Maybe you are looking for
-
This is the crash report I get when I click on the 'TV Shows' tab in iTunes. Please help! Process: iTunes [1819] Path: /Applications/iTunes.app/Contents/MacOS/iTunes Identifier: com.apple.iTunes Version: 10.6 (10.6) Bu
-
Paste in Place shortcut not working
My Paste in Place shortcut (cmd+shift+v) is not working in Adobe Illustrator CC (Updated) for Mac OS X. It works when I manually press the command in the edit menu, but not when I use the keystrokes When the shortcut is initiated, the software behave
-
When I send a email, the people get it with my daughters email as the one who sent it. I have checked all the settings ...help
-
Need to decrease font in EHS form
HI Experts, Need your help. We need to reduce font in our EHS WSC report which is being generated from a template. Here we are executing some z-report. That report uses WWI.INI file and then report opens in Microsoft word. I am not getting where to c
-
Have downloaded latest flash player but setting shows as disabled. Cannot change to enabled so cannot view anything that needs this.