HT201412 I wanted to restore the factory settings on my phone-I used the option Clear iphone ... than 16 hours ruszjace I see only a circle on the black screen
So what can i do now then?
Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Make sure that the phone is charged at least 10min before you connect.
Similar Messages
-
My ipad won't start up. I downloaded iTunes on my pc while my iPad was charging - could this have caused the problem? I don't want to restore to factory settings and lose data. I also recently successfully paired my ipad with a bluetooth keypad. Any ideas or solutions? Thanks, L
FYI, your iPad will charge much faster if you plug it directly into an electrical outlet.
When doing the reset, as Jackkcc suggests, make sure you let go of both buttons fairly promptly after the apple image appears, then wait another 10 seconds or so for the iPad to start up. Note that a reset does not alter any data or settings. -
Want to restore to factory settings but update to Lion as well
Hi techies....can you help me?
My 2009 MacBook pro is still great but is starting a to chug along a little bit.
I want to restore to factory settings (I have the disks) and would then like to upgrade to Mountain Lion.
Problem is I purchased Lion through the App Store when it came out and I now get an error message when I try to restore to factor settings with my install the disks because my OS is newer than the one of the disk.
Part II of my question is this....I backed everything up on my time machine today so does that mean if I restore to factory settings and upgrade to a new OS that I'll still be able to access all of my old files from time machine?You could try making a bootable USB key with Mountain Lion, and bypassing your original OS.
http://www.macrumors.com/2012/07/25/create-a-bootable-mountain-lion-usb-key-inst aller/ -
I am trying to download an audiobook from my laptop and I am getting a message to restore to factory settings so that I can use my PC to download. This will make me loose all of my musice - is there anyway to avoid this?
That may mean the iPod was previously used with a Mac, so it needs to be reformatted so that a Windows PC can access it. That's what a Restore does.
If you do a Restore, the iPod will be erased. If what I said about previous use with a Mac is correct, you really won't be able to use your Windows PC to access the iPod, until a Restore is done to reformat the iPod's storage. And if you do a Restore, the iPod is erased. If you have access to a Mac, you may be able to do something. Please post back... -
I want to give the hand-me-down to my kids so they will stay off my MacBook Pro I'd like to start fresh with the MacBook, remove all the former owners information, restore it to factory settings, but it did not come with any installation discs, so I don't know what to do. I recently purchased Snow Lepoard for my 2008 MacBook Pro. Can I use that to restore the MacBook? Also, the former owner purchased Microsoft Office (ugh) with the computer but again, no installation discs. How do I keep that when I restore?
Any help would be appreciated.
Thanks!I purchased a mini to HDMI cable and tried to connect to the TV but the TV is not recognizing the computer. I attempted to set sound and display settings under the "my Preferences" utility with no success. Again, I'm not sure if I need to upgrade my OS software Any Suggestions?
-
Want to restore to factory settings
My MacBook has been acting very starnge lately and I want to restore it to factory settings, but I no longer have the install disc (at least I don't think I have). I'm currently on 10.6.8, if I upgrade to Lion will I be able to do a restore somehow from that? Does what I'm asking even make sense? This is all a bit too technical for me, but I'd like to give it a go.
your owners manual contains directions on how to do just this. If you no longer have the paper version, you can access a digital version here: http://support.apple.com/manuals/#macbook
-
Want to restoring to factory settings on iphone 4s but lost passcode
I want to give me old iphone 4s to my son and restore it to factory settings/
i cannot remeber my passcode so i followed instructions on apple assistance which tells me to try doing it through itunes.
Restore your iOS device
Connect your iOS device to your computer using the cable that came with it.
Select your iPhone, iPad, or iPod touch when it appears in iTunes. In the Summary panel, click Restore.
however itunes does not show any of my devices.
can any one give me some advice please.
,many thanks cHello Josieclint,
Thank you for using Apple Support Communities.
The following article will provide the steps to walk you through restoring your iPhone using iTunes:
Use iTunes to restore your iOS device to factory settings - Apple Support
Regards,
Jeff D. -
how can i get my ph usage back? Its locked up in the "plug into itunes" screen & wont let me get out. telling me on itunes that its going to restore to factory setting. I dont want to lose my new pics etc... so how do i back out of this so i can double chk my icoud back up?
If you are trying to say that when you connect to iTunes on your computer your Device is not appearing.... Then...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
After the successful Recovery...
Restore from Backup
http://support.apple.com/kb/ht1766 -
I can't contact support directly because I need my serial number to enter chat. You access the serial number on the phone under settings. I can't because the phone won't turn on, it just says connect to iTunes. I can't call for support, because again, the phone doesn't work and I don't have a landline. Is there no way to avoid losing all my contacts, texts and pictures?!? I'm freaking out.
Your iPhone is in recovery mode.
Anything that you did not back up has been lost already.
You need to restore the phone using iTunes. You can restore from a backup once the software is reinstalled.
~Lyssa -
How can I access my apps? They are all greyed out in itunes. I have tried restoring my iphone to factory settings but that didn't work. I have a feeling it may have something to with the restrictions settings on my phone restrictions are on) but it won't allow me to change the restrictions without putting in a passcode. I don't remember ever having a passcode and after several attempts have not been able to get the right code.
Also. on my phone, in settings, personal hotspot, iCloud and Twitter are greyed out. And, the App Store icon is missing from my screen as well.
Can anybody help me with this?
Thanksyep, unfortunately can't reset without the passcode either.
With regards to doing a restore, do you mean:
open itunes on my computer
click on my device on the left
go to the device summary
click restore
it then asks if i want to back up before i restore (to which i say no)
then it asks me if i'm sure I want to restore to factory settings and that all of me media and data will be erased and replaced with the newest version ( to which I say yes)
then it takes about 90 mins to do this but when I look at my phone, everything is exactly the same.
Am I missing something? Obviously I'm technologically challenged, but I HAVE to get to the bottom of this! -
TS1717 restoring default factory settings without itunes as both may have malware
How can I restoring default factory settings without itunes on my ipod 1 and ipod 3rd generation, as both may have malware aswell as 3 laptops, 2 mobile, TV snd BluRay Browser.
any advice will be greatly appreciated.
have tried to disinfect with Kaspersky products but the malware just overwrites everything that is put into the p.c. so I need to use just the pad itself, that is, of course, if it allows me access.
theres nothing like a ipad scorned, ask my weary eyes. cheersyep, unfortunately can't reset without the passcode either.
With regards to doing a restore, do you mean:
open itunes on my computer
click on my device on the left
go to the device summary
click restore
it then asks if i want to back up before i restore (to which i say no)
then it asks me if i'm sure I want to restore to factory settings and that all of me media and data will be erased and replaced with the newest version ( to which I say yes)
then it takes about 90 mins to do this but when I look at my phone, everything is exactly the same.
Am I missing something? Obviously I'm technologically challenged, but I HAVE to get to the bottom of this! -
HT201376 just got a used macbook pro and want to restore to facory settings how do i do is
I just got a used macbook pro and want to restore to factory settings....how do i do this safely?
Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C or Option key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
(118569) -
How do i recover my data after restoring to factory settings?
when i went to sync my phone, it stated "itunes has detected an iphone in recovery mode you must restore iphone before it can be used with itunes" when i press the restore button it then states "are you sure you want to restore to factory settings" i know if i do this i will lose my pictures and videos, is there anyway that i can save them? please help
Not now.
Although photos/videos in the iPhone's Camera Roll are included with the iPhone's backup, photos/videos in the Camera Roll can and should be imported by your computer as with any other digital camera.
If your iPhone's backup is being done by iTunes when syncing or wirelessly with an Apple iCloud account, you will be able to restore from the most recent backup. -
my iphone 4 is not recognized by itunes when i connect to it and tells me that the phone is in recovery mode, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start
Thanks for the response. There is no cloud icon next to them. All of the songs play on the phone still and no song was purchased through iTunes. I added them manually and tried to remove them manually. According to my iTunes they've been removed but they are still on my phone and working.
-
So I saw that my software needed to be updated, so I did it over wifi, then a picture with the plug being inserted into the iTunes logo appears on the screen when finished the install. I plug my iPad 2 into the connector and iTunes sees the iPad 2 connected. Then a window opens that says to restore to use iTunes. I click restore and a second message appears stating something to the effect "Are you sure you want to restore to factory setting all info will be lost."
NO I don't want to loose everything.
My iPad only powers on with the image of a cord pugging into the iTunes logo. I can't get past it and I don't want to restore the iPad 2 to factory settings.
What do I do?
Any help would be appreciated.
FrankUsing iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Cheers, Tom
Maybe you are looking for
-
Using a Variable on More than One Page
Hello, I would like to use the same variable on three pages. Right now I can only get it to work on two. The first page has a simple HTML form where the variable is entered. The second page uses the variable just fine. I am using AJAX to refer to
-
Camera Raw 5.4 updater funz nicht mit Photoshop CS 3
Hallo, ich versuche die ganze Zeit das update Camera_Raw_5_4_updater für photoshop cs 3 zu installieren was aber nicht geht. Habe eine Canon EOS 5D Mark II daher brauche ich das update damit ich die Einstellungen vornehmen kann. Mag mir bitte jemand
-
I feel stupid for asking this, but-
I've made a very simple workflow with Automator that opens up multiple documents (in this case, VectorWorks CAD files) and prints them as PDFs. The problem, if it can be called that, is that I end up having to press the return key three times for eac
-
Call Dynamic Form Wizard via a POST data
Is it possible to call a Dynamic Form Wizard form via POST from another form? I can get my form to work for an Update and Delete transaction, but I can't get it to work with an Insert - I can't prime fields. Conversely, I can get it to work with an I
-
Partial OCR on one page possible?
I'm using Adobe Acrobat 9 Pro (with Windows XP). I've got a PDF page that shows various news articles. The end user should be able to use CTRL + F for some, but not all, of the articles on that page. Is it possible to apply OCR to only part of one pa