HT201412 iphone 3g jailbroken and stuck on recovery mode; tried restoring it but nothing helps what else can i do?
I tried to restore my iphone more than 3 times now but no luck; how and what else can i try to do?
Once you jailbreak you are on your own.
We can't help you.
Similar Messages
-
my iphone 1st gen is stuck in recovery mode and every time i try to reinstall firmware i get an error code 1015 can anyone help please?
Make sure you are using current iTunes on your computer. Click the iTunes Tab at the top of this page. Or try to Restore your iPhone with a different computer.
-
I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?
If you didn't back it up, your data is gone. There is no "solution" after the fact.
-
Error 16 when I update my iPhone 5s showed me stuck on recovery mode and whenever I got error 16 Restore thing is the problem?
Hello Meysam321,
After reviewing your post, I have located an article that can help with your device. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
Resolve iOS update and restore errors - Apple Support
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
Updating IOS Failed and stuck on recovery mode
i'd tried to update my iphone 4 ios 7.0.4 to 7.1, but it gave error and stuck on recovery mode i tried to restore it to previous ios but failed again, anyone have idea what i should do to restore iphone to previous ios or ios 7.1 ...
You can't restore to a previous iOS. Try this procedure:
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings. -
My iphone keeps rebooting and going to recovery mode. HELP
Okay, so it all started about 2 months ago when I let my iphone die. I put it on charge, then went to sleep. I woke up and found out my iphone wouldn't stop rebooting and going to recovery. I have dug so deep into forums just to find a solution but nothing has helped. Most of all I think this is a hardware issue.
I have done the DFU restore, I have restored (around 20 times.), but my iphone has a broken power button so its hard to get around some things.
It will show the apple logo, then the "connect to itunes".
Please if you have a bite of information or you have had this problem, PLEASE help me out!
Thanks in advance.If you are restoring from a backup that could be a reason why your issue is still there
Restore your iphone using itunes one last time, this time setup as new.
Try it for a couple of hours or the amount of time it usually takes your iphone to reboot and go Into recovery mode.
If issue stops then is something in that backup
If it continues or if you have already set up as new in those restores you have done before
call apple so they could look more Into It (1800 692-7753) -
my ipod touch is stuck on the apple logo and i cant reset it as my home button is broken what else can i try?
Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My phone got stuck in recovery mode after update to IOS 5.0.1, how can I solve it ?
my phone got stuck in recovery mode after update to IOS 5.0.1, how can I solve it ?
Read this
http://pathumf.blogspot.com/2011/11/how-to-reboot-stuck-iphone-iphone-4s.html -
Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!
If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem. Also, since you have IOS-7, read this. It might help.
-
80GB iPod Classic stuck in recovery mode, tried EVERYTHING
Hello, i'm Michael, and i need some help right now :c
i just got an iPod Classic with 80GB of HDD, just a gift, but it had some "issues" (the screen showed a dock connector and it reads "Use iTunes to Restore"), i had an iPod Touch 4G, and i had that restored several times, so i knew the trick.
Okay i came from my grandmother's house and plugged my new fancy iPod! (it came with no USB cable so i bought a cheap one) but when i plugged the iPod had not enough power to remain connected, so i though (maybe the usb cable is not powerfull enough to mantain the charge cicle, it's a 2$ one, so it's big deal) plugged my iPod to my speakers on the Dock station, and leave it there for the entire night
The next morning i plugged my super charged iPod to my Windows 7 PC, and it got detected YAAY!, iTunes asked me to download the software to restore, so i let it do just that, waited for the 56mb ipsw file to download, and after that the restore process begun. At 57 seconds of the process (i timed it) the PC turned OFF (not big deal, my processor is not the best processor ever, and my PC usually turns off after a small overdrive)
Well, the iPod restarted and it was at the "Use iTunes to Restore" screen again. So i tought (Well, let's try my sis laptop) connected my iPod to the Windows 8 Laptop from my sister, and the iTunes download (iTunes + iPod ipsw) took a lot of time to me.. But when it comes to the Restore Process, after the same amount of time, i got the "1439" error, and after looking foward throught a lot of web pages, i came out with the "Windows 8 is the one of the problem :L" so i plugged my iPod out and leave it charging in my speakers, at the next day, i was in my Grandmother's house again..
So i came out with my uncle and told him to lend me his Lap, a Windows 7 64X Core i5 Extreme with VT (super machine i loved it *¬*) and plugged my iPod in, i tried to Restore with his iTunes version (11 one) and guess what? 1439 error! it looked like the USB cable was the problem one, but i didn't gave up, and installed Virtual Box with Widnwos XP (i rode some guy had it working with a restaration with XP, and makes sense, since Windows 7/8 can't format large drives with FAT32, and XP sure can) so i plugged my iPod and installed Guest additions and the Expansion pack (for USB 2.0 support) installed the last iTunes version and tried to restore, and guess what? 1434!
So, i tried something different, i tried to format the iPod with Windows Explorer, and guess what? it worked! NTSF system was loaded ad working, i dragged some 134mb files to it, and they could be readen every time i wanted. But there's a problem, iPod software is not NTSF but FAT32, so i downloaded EaseUS partition manager and formated it to Fat32, 128kb cluster size, and unplugged it to plug the speakers again (YES, I TOOK THEM TO MY GRANDMOTHER'S) after the battery's top capacity was acomplished, i tried the restore form XP again, and after a few tries, i got a succefull restore!
The iTunes screen showed "your iPod is going to restart, please leave it connected, and it will be recognized after the reboot" (or something like that Cx) i was really happy i could get my iPod to work, but when the Apple logo appeared with the progress bar, it filled like 84%, and the screen became white, it showed the same "do not disconnect" regular screen, and iTunes told "iTunes has detect and iPod in Recovery Mode, please restore it to be used with iTunes"
So, i tried a LOT of methods from Apple Discussion, formating in Disk Mode, Restoring in Disk Mode, regular mode, DFU mode (only downloads a 1.4mb file and says "preparing the ipod" after 34 seconds and an uncomplete bar it closes ._.) restoring with XP, 7, 8, rebooting the iPod (select + menu, 6 secs) DFU mode (menu + select 12 secs) disk mode (play + select, 6 secs in apple icon) and a lot of hard work.. nothing worked.
So i tought.. (maybe the iPod's HDD is broken or something) opened Diagnostics and this are the results:
Retracts :432
Reallocs: 319
Pending sectors: 0
Poweron Hours: 560
Start /Stop: 426
Temp status are not important right now, current 23, max 43c, min 15c
it's obviously an used iPod. But the Reallocs count is not THAT big
Okay so i tried something different and asked my friend's iPad cable, this one connected pretty well with Windows 8 and it did restore with no problems at all. but there's one little small issue.. it didn't work either...
So, i'm here, out of ideas, i can imagine a restore with OS X will change my point of view in some way, but i can't do that right now...
i Must add that the HD is completely functional, i can add files to it right now, and use them in another PC, i can format it, partition it, and a lot of crazy things, so the HDD is not the problem one..
Please help me.. i have EVER SEEN a iPod's menu, other than my DSi iPod themed homebrew music player.. (wich looks fantastic)
Thank's in advance, i'm sorry for the lenght of my note, i have been thinking on it for a long time hehe c:After hours of searching for a fix I may have found one on a Mac Forum. This worked for mine but I had to restore it from the last back up. I also gave me the option of restore to new condition (out of hte box) but Ichoose from the last backup that itunes made. It took about 4 hours to fully restore all my 24gb of material. BUT,Now it's working perfectly. For how long...who knows?
Here's the link to the page where I found the info. http://forums.macrumors.com/showthread.php?t=447185
Below is the solution that worked for my 2nd gen 32 gig.
"Originally Posted by vegas-steven
try and do this:
1. start itunes.
2. plug the ipod into your computer
3. hold the power (on top) and home (on front) buttons for a few seconds.
the ipod should power up, and if if is screwed up, will be in recovery mode... from there itunes will tell you that it finds your ipod in that mode, and needs to restore it.
just click restore, sit back and it should work again.
did you hack it at all?
if you did not hack it, and that doesnt work, call applecare and see what they say. maybe it is faulty?
still, from my experience with my friends ipod that i made 100% unusable, there is a way to restore even the most broken ipod as long as it has a battery charge.
i suspect a small portion of the memory is dedicated to keeping emergency boot files that allowe you to restore, no matter how bad things get." -
Ipod Touch 1st generation: blank white screen - I tried holding both buttons and connecting it to the computer, restoring it, and still nothing. What else can I do? I did not drop it in water.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Today my iPod touch 4 generation was dropped. now it just has a white screen. i tried reseting it by clicking the home and lock buttons but nothing helped. what is my problem and how do i fix it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I tried double tapping my home button and swiped to the right but did not help me. I am trying to straighten my message page that is stuck sideways and won't respond to shaking or turning phone around. What else can I do?
Restart iPhone: Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).
SCREEN ROTATION
Lock the screen in portrait orientation: Double-click the Home button, swipe the multitasking bar from left to right, then tap icon with the circular arrow in a square. Read this http://support.apple.com/kb/TS3805 -
I can't access my game center on my iphone..when i open the game center, it just 'LOADING' but nothing happen...can sum1 help me?(& in 1 of the game,i check my frenlist & only found 1 friend but im not sure who that person is)
.local indicates local activity by the computer host Williams-macbook-pro.local=hostname@domain . The UID of 501 is the standard UID of a local computer administrator.
Copy and paste this little script in your terminal:
if [ "SSH_CONNECTION ]; then
echo I am remote
else
echo I am local
fi
A return of "i am local" ensures there is no remote connection to your machine (through SSH).
In the future, to avoid remote entry, I would recommend not posting your IP address though. -
My apple TV is brand new, about two months. It wont start, I tried unplugging it and pugging it again, and it wont start, neither dos the on light goes on, what else can I do
Hate to say it but if the light doesn't even come on - sure sounds like a hardware issue (assuming you've got it plugged in: not meant to be insulting, just been there done that)
The good news: believe your still in warranty. Report the problem directly to Apple.
Maybe you are looking for
-
UPDATE ROUTINE --- CUBE --- ODS Very Very URGENT
Hi Collegues/Friends , First I need to thank for the intiators of this site , as I came to know that for many problems we will get different best solutions ... Hoping the same I am posting a question which is very very very urgent as the client is ru
-
Transport of Customizing from Dev Server to Quality Server
Hai , After release of change request using SE10,How we can transfer from one server to another . Regards, Mohanraju
-
hello Guys, In the APPS customized form, I have one column which stores the fnd_profile.value('user_id') , on the basis of this user_id , i need to retrieve the employee ID which is linked with this user_id. any tip how can i get this? Regards
-
How to Book Instructor in T&E Management
Dear All, How to Book Instructor in T&E Management.Can anybody explain me step by step.Finally where I will see Instructor details in SAP standard report.Report like Instructor details , Room details , Billing Details , Course Group related to Instru
-
How to export from FCE to mini dv?
Im trying to print the film I made back onto minidv, but I must be doing something wrong... I click the option of Print to Video etc and it plays back and even starts recording on the camera but nothing is recorded on the camera, it just stays on the