HT201412 Ipod touch screen not responding. How do i fix it?

My ipod touch screen often stops working or just wont respond to my touch. When i shut it off and try to get back on it wont respond and i will half to wait till it decides to work which can take up to 2 hours. How do i get it to work faster?

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:                                 
iOS: How to back up           
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar          

Similar Messages

  • My ipod touch screen reacts sporadically, how can I fix this?

    Hi my ipod touch screen works sporatically.  It reacts spacticaly. When I use the keypad it will slowly react and get the letter and sometimes puts in the letter several times. I barely touch it and it reacts and then other times I have to wait seconds until it will react.  What can I do to fix this?

    Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • My iPod touch screen stopped working, how do i fix it?

    My iPod(4th generation) touch screen stopped working. Okay so it was fine earlier, my home button does not work so i have been using the assistive button for months, and until earlier today it got stuck, i tried to power it off but it doesn't let me slide to power it off, and it doesn't let me press anything on the assistive menu either, and i'm currently waiting for my ipod to die but it's taking forever since it's battery lasts forever! is there any other solutions you can give me?
    and i was wondering if my ipod has life insurance with apple so if something is wrong with the screen, can i take it for a new one? (my ipod is in very good conditions, not cracked or scratched, just the home button is an issue)
    thanks!

    Try restoring via iTunes. If necessary. try placing the iPod in recovery mode using one of these programs and then restore:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC           
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • Everything on my ipod touch screen in zoomed, how can i fix this?

    from some reason everything on my ipod touch is zoomed, i have no idea how to fix it. help please?!

    Settings > General > Accessibility > Zoom OFF. Regards

  • My ipod touch is not responding when i plugged it  in even with a different cord and restarting my computer

    my ipod touch is not responding when i plugged it  in even with a different cord and restarting my computer and i am using my moms itunes that she has had for a long time and so i cant uninstall itunes.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Touch screen not responding as it should

    Touch screen not responding properly and keeps locking up.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT201210 My iPod touch does not respond, I tried to restore it from itunes but it did not work, itunes recognize it but the restore process seems to do nothing

    my iPod touch does not respond, I'm trying to restore from itunes but it does not work

    What exactly happens when yu ty to restore?
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT201412 My Ipod touch is flashing white how do i fix it?

    It sometimes fixes when its on charge but it is moastly white . The charger thing doesnt work anymore and this is getting on my nerves as i got it about 7months ago for £139.00 of off amazon! How can i make it stop flashing white and can only make out a few words! If this helps i have 1 little scratch on my screen but i dont think that has anything to do with it as my sisters has loads of scratches and doesnt flash white HELP ME PLEASE

    Sorry... But  the BOLD and the PURPLE are impossible to read...
    You asked in the Header...
    ' My iPod touch is flashing white how do i fix it? '
    Suggestions:
    Try a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If necessary...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414

  • My ipod touch is not responding. It wont turn on. I have plugged it to the wall charger and have tried plugging it to my itunes, no signal is received or transmitted. what could be wrong?

    my ipod touch is not responding. It wont turn on. I have plugged it to the wall charger and its not receiving a signal. I have plugged to my itunes and its not sending a signal to my computer. what could be wrong?

    Did you check the USB cable or try another one?
    Did you check the docking port for any kind of debris or lint?
    Did you already try to reset your device by holding the sleep and home button until the Apple logo comes back again?

  • My iPod touch is not responding and doesnt give any options says it's disabled for 22,134,252 minutes and not moving

    my iPod touch is not responding and doesnt give any options says it's disabled for 22,134,252 minutes and not moving, any ideas?

    iOS: Unable to update or restore

  • Ipod touch screen not working even after resetting to factory specs

    ipod touch screen not working even after resetting to factory spec.  lock symbol appears at top

    That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.

  • My Ipod Touch is not responding.  I have restored, I have recovered, I have followed the troubleshooting tips. It is still frozen and I can't turn it on or off.  Is there anything else that can help?

    My Ipod Touch is not responding.  I have restored, I have recovered, I have followed the troubleshooting tips. It is still frozen and I can't turn it on or off.  Is there anything else that can help?

    Let the battery fully drain. After charing for at least an hour try a reset and restore.

  • My ipad mini ios 6.1.3 touch screen not responding

    after just a week of minor usage my brand new ipad mini touch sensor stopped working have updated it, resetted it, and restored it , it worked after the first restore then went back to the same condition restored it again and again but nothing what am i supposed to do with it now

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • Sometimes my screen freeze after unlock my phone . sometimes after open an app the touch screen not respond to my touch...

    help.... i've faced this problem since the windows phone 8.1 updates.... sometimes my screen freeze after unlock my phone . sometimes after open an app the touch screen not respond to my touch... i tried all the ways like turning off wifi etc and still
    no recover my problem , and still screen freezing problems appear on windows phone 10 technical support..... just wish had to cure it... or i was depressing ....

    Hello,
    This is a developer forum and is intended only for discussions of Windows Phone APIs and app development.
    For technical issues regarding usability, updates, or other Windows Phone usability problems you might want to try the Microsoft Mobile Community forums:
    http://answers.microsoft.com/en-us/winphone/forum?tab=Threads
    Thanks,
    James
    Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/

  • Touch screen not responding and shows no no no!!!! message on screen

    my iphone3gs touch screen not responding and shows no no no!!! message on screen,please hlp me out....

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    In this case you are going to need to look at getting the phone into one of our authorised repair agents, please contact your local  Xperia Care team to have this arranged.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

Maybe you are looking for

  • Sending an email to customer using VF02

    Hi Experts can anyone help me with the code sending an email to customer using TC:vf02.i already done with config .please help me.

  • Im using firefox 3.6.18 and when i open website it hangs for a few seconds...

    im surfing at myanimelist.net and when i loads the pages, it hangs for a few seconds and stop... then hangs again (not responding).. i disable all the plugins but it still the same.. and ive deleted .dat files of plugins suggested by troubleshoot but

  • PreparedStatement reuse

    Is it possible to use a PreparedStatement after its resultset has been processed? It seems to me like once you iterate through the ResultSet the PreparedStatement can not be executed again with a different set of parameters. Is this correct? I'm usin

  • When send a soap to XI encounter a error -HTTP-client: status code = 401

    The scenario is to send a soap request to SAP ERP through XI from legacy system A, ERP and return information back to the legacy system. we have encounter this issue after XI received the soap from legacy system A. I have already done: 1. tested the

  • Thread start (and end?) times?

    Is it possible to see when a thread was started? I have looked at various pieces of doc on JPDA, Java API, etc. and cannot see any references to this. Of course I could track it myslef when threads are created, but I was wondering if the JVM does tha