HT201412 my camera and photo booth have stopped working, everything else is fine.

camera shutter does not open so I cannot take any pictures. As well, the photobooth doesn't work. The red curtain just opens and closes.

Try resetting the iPad. Hold down the sleep and home keys, past when you see the red power down slider, and until you see the silver apple. Let it reboot and see if that helps.

Similar Messages

  • Hi i have a dv2000 and the power light and harddrive light have stopped working evrything else is ok

    hi my hp dv2000 power light and hard drive light stopped working.
    everything else is running well, any body got any idea,s running windows ultimate 7

    Please identify your notebook/pc .
     Look at the base/rear/side of the notebook/pc at the barcoded sticker.
    Post items numbered 1 and 2 on the following example of an HP notebook's barcodedimage. Your barcode may be slightly different but will still have the important imformation needed for us to help you.  
    ###Do not post the serial number as it is personal information.###
    Post the installed operating system version ( and whether it is 32 or 64-bit ) and whether the CPU is an AMD or Intel product
    Not posting all of the information as requested will delay our responses and slow troubleshooting of the issue that led you to author a thread.
    Is your notebook/PC still within its warranty period?
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Camera and photo booth is disappeared

    Camera and photo booth is disappeared

    These are both native apps that came with the ipad and cannot be deleted.  Check in settings/general/restrictions to make sure they have not been disabled.  Check in folders or on another screen.  If you cannot find them then go to settings/general/reset and reset home screen layout

  • My-space-bar-and-delte-button-have-stopped-working

    My-keyborad-spacebar-and-delete-button-have-stopped-working.Any-suggestions

    I don't suppose you have an external keyboard. If you do, test it. If not, try booting in safe mode (shift key down at startup.)

  • Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......

    Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • Web cameras and photo booth

    I just picked up a Creative Live ! Cam video IM Pro.
    The device is UVC complaint. However it will quit occasionally while in photo booth and I will need to unplug/plug from the usb port to get it operating again. This web cam stuff is all new to me. Can I use this device to record into Imovie ? I'm running 10.5.2on a mac pro.
    Thanks

    You're welcome, joe musich
    what can I do with the camera I've got with imovie ?
    Nothing directly with iMovie.
    As shown in this Apple kBase article, you need an external (Firewire) iSight or other "IIDC" webcam for recording directly into iMovie with any external webcam. All IIDC webcams connect via Firewire, so no external USB webcam will work to record directly into iMovie.
    You can work around this limitation by recording video clips with an application that can use USB webcams like QuickTime Pro. Then import the saved clip into iMovie for editing.
    FYI, the built-in iSights in many current Mac models are the only USB webcams that work and allow live monitoring of what is being recorded directly with iMovie. EVERY external USB camera, whether camcorder or webcam, would need to record the video first and import that into iMovie for editing.
    Will I be able to see live action form the camera in imovie ?
    No, not with your external USB cam and iMovie. Using QT Pro or another app that can record directly from your USB webcam, you will be able to monitor the video action in that app.
    Or do I have to import something I capture with the camera ?
    Yes, when using your USB webcam and trying to edit with iMovie. To get video from your (or any) external USB cam into iMovie, you must import a previously saved compatible file.
    Please let us know if you need any other info before you can mark this topic "Answered."
    Cheers,
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2)  External iSight

  • Problems with camera and photo booth

    My camera shutter will not open, and in photo booth, the red drape repeatedly closes.  I have closed the apps and also reset my iPad, but nothing works.  Do I need to bring it to Apple?

    Jambagroov-
    I have not tried it, but found an article that explains how to sync your iPad to a new computer:  <How to Sync an iPad With a New Computer - eHow.com>.  I know you can lose your data if you do not do it right!
    Another article is at:  <How to Sync an iPhone, iPad or iPod Touch with a new computer>.
    Someone else may have a better reference, perhaps from Apple.
    Fred

  • CTRL+H and CTRL+B have stopped working for Firefox. Every other CTRL command works. What's wrong and how do I fix it?

    Whenever I want to open my history (CTRL+H) or my bookmarks (CTRL+B), I use those commands. They've always worked. Yesterday, they mysteriously stopped working. Every other CTRL+KEY command still works flawlessly.
    I haven't done anything out of the ordinary in the past few days, and I've already tried to restart my computer. What could be the cause of this?
    Thanks.

    '''Try the Firefox SafeMode''' to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
    When in Safe Mode... <br />
    * The status of plug-ins is not affected.
    * Custom preferences are not affected.
    * All extensions are disabled.
    * The default theme is used, without a persona.
    * userChrome.css and userContent.css are ignored.
    * The default toolbar layout is used.
    * The JIT Javascript compiler is disabled.
    * Hardware acceleration is disabled.
    * You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes <br />
    Or it might be caused by Hardware Acceleration.
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • I use Yahoo and certain features have stopped working. What do I do?

    Any option in my inbox that has a drop-down arrow stopped working. I can't move emails, I can't reply to all when I get emails sent to many others, etc. I contacted yahoo and they said this is not a yahoo issue, that it must be with my browser. I think I have the latest firefox version. Would clearing the cache fix this? Does clearing the cache remove all my saved passwords?
    Also, sometimes when I log into yahoo, everything is in a column on the left. This happens in Ancestry dot com as well. BTW, I can't log into Ancestry now bcuz all the tabs, etc. is in a column on the left, and the boxes where I need to enter in my UN and PW, when I click the boxes, nothing happens.
    I tried Ancestry and Yahoo inbox in IE, and everything worx ok. So I feel it really must be firefox. HELP!
    Thanx.

    Try resetting the iPad. Hold down the sleep and home keys, past when you see the red power down slider, and until you see the silver apple. Let it reboot and see if that helps.

  • M45-S331 no history of issues... 2 right usb ports and the touchpad have stopped working.

    Hi, 
    I'm really starting to give out of things to try to figure this out.  So this laptop was bought, brought home and sat on a little table and has been handled delicately.  I was happy to get it and it's never had an issue.  Like the title says, now the USBs on the right side (single left usb functioning) and the touchpad have just stopped doing anything.  I can't really say for sure exactly what was going on before it started to do that... I'm thinking it was working, I shut it down and maybe a day later I powered it up and noticed it probably as I was trying to log in.  I have: checked connections, board contacts, drivers, reinstalled windows... so I mean at that point there's probably nothing I can do... but all seems fine with the equipment from what I can see looking at it, add in the fact that the two aren't really exactly the same so for them both to go like that is odd... I just want to know what I'm not thinking to do as far as troubleshooting it...  
    I don't know if there's anything else I can provide, but if there is I'll have it... 
    Thanks.

    I'm beginning to think there's not too much more I can check.  I still think it's odd that the 2 usbs and the touchpad go out at the same time.

  • All Google and Twitter apps have stopped working on iPhone 6

    I've had a new iPhone 6 for about a month now and suddenly on the same day last week, all google/twitter related apps have completely stopped working, like they can't access my network connection.
    Google Maps, Hangouts, and Gmail are all showing the same issue, they say there is no network connection even though there is. 
    Twitter won't even let me sign in because it says it can't locate the server when I enter my login credentials (and I've tried multiple accounts, all with correct information).  Most odd is that even 3rd party twitter apps like Tweetbot don't seem to work either, as they won't let me login.  When I try to login using the Twitter section of iPhone settings, it tells me my login info is incorrect even though I have checked multiple times and it is. 
    I've tried deleting all of these apps and re installing, to no avail. 
    Anyone?

    settings - general - reset - reset network settings -
    you will have to reconnect to any saved wifi
    Peace, Clyde

  • The hold button and volume buttons have stopped working on my iTouch 4. How can I fix it?

    I've only had it for about 6 months. It's never been dropped or abused in any way. All of the sudden, the buttons just stopped working. How can I fix it? Please help!!

    The issue with the battery is a problem.  The last battery I purchased was at the end of September, so it is NOT old.  I would think that a battery would last longer than 6 months, considering the original one lasted up until that point.  Granted it would not hold as much of a charge, but it still worked at least.  So, at this point, I would think it would be a problem with the laptop and not the battery.  I have asked a few friends of mine, who are IT professionals and they said that it is probably an issue with the internal power supply.  I've also tried replacing the AC adapter and that did not work either.  As you said, you get what you pay for.  Since I paid a good price for this laptop I would think it would last longer than it has.  The other 2 I have do not have this issue.  The DV5215us is on it's second battery, which is reasonable, and it does not have this charging problem.  The tx1115nr also does not have this problem and is still on its original battery.  One would think that since the earlier generations of product would have more problems than the latter, but I guess that is not the case.
    Like I stated eariler I am rough on my laptops and I should probably look at ones that are built more rigid.

  • My Safari, Address Book and Mac Mail have stopped working.

    Recently my Safari, Address book and Mac Mail have become unstable, I cannot edit or copy anything from my Address book, most of the time it'll stop responding before I can even view an address. My Safari keeps freezing and then crashing and I have to force quit, sometimes several times before it'll close. The Mac Mail won't do anything, it tries to download mail and then will sit there doing nothing, again sometimes I have to force quit several times before it'll actually quit.
    I have run the extended hardware test and all is fine, I have reinstalled my OS and then restored my info from a backup and still it doesn't work. Can anyone shed any light on this?

    Hi jen_bob,
    My iMac is a trooper, so far this is the first time its played up - I have I pushed it too far?
    I think you've just installed the wrong version of Safari, that's all. Safari 3.x is supposed to be for OS X 10.4 or 10.5 - according to your tag line you are using 10.3.9.
    Assuming you are using 10.3.9, then the Safari install will have updated a few system frameworks that are used by other applications (such as Mail). In that case, the 'easiest' way to get things working again is to do an 'Archive & Install' and choose to preserve users and network settings.
    http://support.apple.com/kb/HT1710

  • Scrolling and Swipe funtionalities have stopped working since update.

    Since I have installed updates on my Mac the magic mouse settings now show just basic settings such as tracking speed, double-click speed and primary mouse button. As the title suggests scrolling and swiping are no longer working.
    I have tried to pair it a few times but nothing changes.
    Ideas?

    wuaw. its done. (:
    i reinstall USB OVERDRIVE and uninstall again. but i do in UTILITIES folder at this time. you should click 'Uninstall USB OVERDRIVE.app' in System Preferences > Utilities folder.

  • My PSE 13 resizing and move tools have stopped working.

    Suddenly, my resizing and move tools don't work. I get the box but am unable to move sides or whole image. Any suggestions? Thank you.

    Hi,
    Please try resetting your tools from Photo Bin flyout menu.
    1. Open Photo bin.
    2. Click on Fly Out menu
    3. Click on option Reset all Tools
    4. Relaunch Editor13
    and see if it helps.
    Thanks,
    Anwesha

Maybe you are looking for

  • TV@nywhere Master Recording Problems

    The TV@nywhere Master works fine for viewing, but I can't record without problems.  There is a sound problem with all available versions of WinDVR.  The recorded sound regularly "warbles" or pulsates. It is detectable when a musical tone is playing,

  • Creating database using DBCA stuck at 85% for about 7minutes~

    when i create DB using DBCA , it stuck in 85% for a long time ,and the a waring appears it says : EM configuration failed due to the following error -error starting database control refer to the log file at emConfig.log for more details so i checked

  • ABAP WD - Dump Perform in program

    Hi forum, I've a dump that I'm not able to solve. The problem is that I had a perform in program with 2 parameter and I changed it with 3 parameters. I had adjusted all the code for this form in a subroutine pool program type. The command call is.   

  • No sound in yahoo chat after installing the "bios fix"

    I had to do the "bios fix" from toshiba.  Since then I no long have sound in yahoo chat.  I've tried reinstalling the vissta voice fix for yahoo, I've tried uninstalling msngr and upgrading to msngr 10 and nothing seems to work.  Anybody have any ide

  • Why do events not show up in Historical Data Viewer

    I am using Lookout V6.6 and Events are not showing up when I look at the A&E view in the Historical Data Viewer.  I ensured that I have the Events enabled in the view filter.  All Alarms show up but no events.