HT201412 My iPad 2 turns off after 2 minutes.

it crashes event hough it is fully charged, whatever an application is open or not.
was restarted. no change
tried to restore with iTunes, but it crashed before the end of the restore.
wat can I do?

You should calibrate your battery once a month for proper reporting of battery status.
Run the battery down from 100% until it shut off.
http://www.apple.com/batteries/ipad.html
Message was edited by: Diavonex

Similar Messages

  • I cant find my pdf/ibooks on computer after backing up my iPad (they are on my iPad).   Also, I'm having issues with my Ipad turning off about every 2 minutes so I want to restore it.  Dont want to lose my files from my iPad.

    Actually I have 2 problems:  I cant find my pdf/ibooks on computer after backing up my iPad (they are on my iPad).  I looked under Ipad, I Books, PDFs, and it doesn't show them on the computer. How do I manually transfer these files?
    Also, I'm having issues with my Ipad turning off about every 2 minutes, and I want to restore it.  I want to make sure all of the files are backed up before I restore.  My trouble started when I was trying to update my IPad but it was taking too long (internet was scetchy) so I powered off...now Im having problems.  I haven't tried to update again since this problem. Any suggestions?  Should I restore? Should I update to 7.0.6?  (currently 7.0.3).
    Thanks,

    Try here:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer

  • Yoga display turns off after 1 minute

    I'm having an annoying problem with my new Yoga related to the display and have not seen any other posts with a similar complaint so perhaps this is a simple fix that I'm just not able to sort out on my own. My display turns off after 1 minute of inactivity. The only means for changing behavior like this that I am aware of is through the Control Panel Power Options. My settings for "turn off the display" are 10 minutes on battery and Never while plugged in (note screen shot attached). Regardless of my settings, the screen turns off after 1 minute. I've changed the settings to multiple configurations and restarted with no change in behavior. Perhaps there's some other settings area, maybe something specific to Lenovo that I'm not aware of (since this is my first Lenovo laptop). Anyone with similar problems or insight?

    This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver). Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver). BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time. See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.

  • My screen darkens after 1 minute and turns off after 3.  All of a sudden, now, after the screen shuts down, it comes right back on????

    My screen darkens after 1 minute and then turn off after 3 minutes (energy saver).  Now, all of a sudden, after it shuts down it comes right on???

    thank you so much sir... i am very thank ful to u... it was an breath taking moment ... i was almost dead as it didnt work

  • Screen turns off after a few minutes and needs to be closed then opened

    hi, as the title suggests my powerbook screen turns off after a few minutes before my screensaver is set to come on and when i come back and press a key or move the pad it wont start up so i need to close the powerbook then open it up again for it to activate. its not a huge problem but my programs which connect to the internet seem to lose their connection when i open it up again. is this normal? is there a setting i can change?
    thanks
    ross

    Is there a way to "disable" Standby, Suspend and Off just when watching movies (in fullscreen or not)? I want them to do what they usually do in all other cases.
    Setting them to 0 in xorg.conf does the thing, but I need that functionality only when I'm wathing movies. Making a script that alters adjustments in xorg.conf isn't the best solution - you'd have to restart X every time you want to watch a movie .
    Cheers,
    Daniel

  • My iPad will stay on for minute or so, then will restart.  I have tried to restore, but it says I must have "Find My iPad" turned off. The iPad will not allow me to turn that off, so I am at quite the impasse.

    My iPad will stay on for minute or so, then will restart.  I have tried to restore, but it says I must have "Find My iPad" turned off. The iPad will not allow me to turn that off, so I am at quite the impasse.  Any help?

    Answer to this question: https://discussions.apple.com/message/22350503#22350503

  • My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

    My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

    Try a system reset.  It's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • G5 Turns off after 10 minutes

    My iMAC G5 just turns off after about 10 minutes. I had trouble with the power supply a few years ago and I replaced it and everything was great. Now it just turns off after about 10 minutes and I am wondering if the power supply is acting up again. Do these things have a problem like this? It was easy to replace, so I can just do that again if that will fix the problem. But I don't want to just start changing out parts and still have the problem. Is the power supply a problem with this model?

    More info on the iMAC. The processor is 1.8 GHz PowerPC G5 the memory is 1 GB DDR SDRAM running Mac OS X Version 10.5.3. Buss speed 600 MHz, Number of CPUs 1. I just took it apart and cleaned the dust out to see if that will help. We will see.

  • Hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out

    hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out

    To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the phone. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Find an Apple Authorized Service Provider
    iPhone - Contact Support - Apple Support

  • Why does my Sony Sound bar CT60BT turn off after 15 minutes?

    I turn the volume down during the evening and when I do, it automatically turns off after about 15 minutes.  Is there a way to change the settings so that it doesnt go into standby mode?

    Hi mdalton1284,
    Your Sound Bar has an Auto Standby Function.
    It will enter standby mode automatically when you do not operate the Sound Bar for about 15 minutes and the Sound Bar is not receiving an input signal but the sound bar is receiving signal from your PS4 going to the TV via HDMI connection.
    You may try resetting the Sound Bar.
    Follow the steps below.
    Use buttons on the remote control for the operation.
    Press BASS +, VOL - , and TREBLE + in that order within 3 seconds.
    Let us know if you're getting the same result after resetting the device.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • Why does my ipod randomly turn off after 5-10 minutes of use?

    Why does my ipod randomly turn off after 5-10 minutes of use?  Is the battery defective?

    I figured it out.  Headphones were not plugged all the way in.  This support community is awesome.  Thanks everyone.

  • TS3474 Why does my iPod Nano turn off after one minute of use?

    I just got a new 16 GB iPod Nano and it turns off after one minute of use.  Why does it do this?

    I figured it out.  Headphones were not plugged all the way in.  This support community is awesome.  Thanks everyone.

  • After the battery run out my iPad turns off

    My iPad turns off when the battery run out. Then I plug-in it for recharging. iPad start with Appel sight then switch off again. Then again start with Appel and off again. So it is not stoping on/off and not recharging. The USB cord is good, other devices recharging properly. That to do?

    Plug your iPad into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.

  • My nano starts playing a selection then turns off after one minute

    My nano starts playing a selection then turns off after one minute

    Problem solved for now.  Cleanded the jack port with a q-tip and pushed the cable in harder.  Seems to be working.  Thanks to all others who posted these past suggestions.

  • HT1430 my iphone 4 turn off after appearing message "temprature high, need to be cool down after than doesn't becoming turn on"

    my iphone 4 turn off after appearing message 'temprature high, need to be cool down' after that does not getting turn on by anyhow.

    Hello vijaypatel,
    Thanks for the question. The following article outlines the temperature warning that you experienced:
    iPhone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures
    http://support.apple.com/kb/HT2101
    If the iPhone is no longer powering on, we will need to isolate this issue to determine if it is hardware related.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks,
    Matt M.

  • The video on the Camera app seems to turn off after a few min...I am trying to do a 20 min video.   What am I doing wrong please?

    The camera app has a video feature on it and I tried to do a 20 min video but it seems to turn off after a few minutes.  I tried twice with the same results.  There is no info under settings or anywhere on time restraints.  Does anyone have any suggestions please? 

    Sasabean-
    I do not know if this is related to your problem, but there is a setting on the iPad called "Auto-Lock".  Mine is set for 5 minutes.  One of the options is Never.  See Settings-General-Auto-Lock.
    Fred

Maybe you are looking for

  • 10.6.8 combo install problem

    Hi I downloaded 10.6.8 combo from apple. When trying to install it got this error message : Mac Osx server update combined can't be installed on this disk. This volume does not meet the requirements for this update. Please help me sort this out ... P

  • ORA-12899 : Does it exist an option to truncate automaticly the data too...

    Hi, I work on a migration project : Sybase to Oracle 10g. There are a lot of request INSERT writed in Sybase with data too long to be insert in a table. Example : create table MyTable (txt varchar(10)) insert into MyTable values ('AAAAAAAAAAAAAAAAA')

  • Dynamically change "lowest value allowed"

    I need to reset an item's "lowest value allowed" and "highest value allowed" frequently. Its Data Type is Integer. I like to set them dynamically by reading the values from a table so that I don't need to rebuild the form each time. What type of trig

  • Hyperion Shared Service Upgrade

    I am upgrading shared services from 9.2.0 to 9.2.1 . HSS (Hyperion SHared Services) is deployed on oracle application server 9.0.4.Now following the upgrade instructions in the installation document of HSS I did the install and then ran the configura

  • How to access ipod music after computer crash?

    Yes, we lost all stored info in our ipod library. (Thank God we backed up the checkbook and pix!) So, I reinstalled the software, and bought a new CD from itunes. My shuffle still has all my old music on it of course, and I can listen to it, but what