HT201412 Phone suddenly has voice speaking commands but commands do't work
I've had my iPhone for almost 2 years. This morning when I tried to use my phone A computerized voice started speaking the commands but the commands don't work. I didn't even know there was a voice function on this phone. I can't seem to do anything with the phone now.
You have "Voice Over" on:
Press Home.
Tap Settings. Then double-tap Settings.
Tap General. Then double-tap General.
Use three fingers on the screen to scroll to Accessibility.
Tap Accessibility. Then double-tap Accessibility.
Tap VoiceOver. Then double-tap VoiceOver.
Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.
You have to tap, then double-tap to select the numbers to enter your passcode.
Similar Messages
-
Hi, so I pushed autofill because I thought that it would put music on my phone from a different iTunes library but it didn't work, and now the songs show up grey in my music on my phone and they won't play, but they are still there. What can I do to fix this and get rid of the grey songs?
Go back to iTunes, select the Music tab, uncheck the 'sync music; button, then hit apply.
-
I was downloading the new IOS and message could not find Iphone appears in Itunes window - Now my my phone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work
So when you plug it into your computer, you're not getting a message in iTunes that it has discovered a phone in recovery mode?
Reboot both the computer and the phone and try again. -
My 2nd gen touch has suddenly got a fuzzy screen but otherwise appears to work
I had a replacement touch from apple last March and all worked well until a few weeks ago. The screen has gone fuzzy, almost grey but beneth you can still see apps. All apps work so no problems with screen. Took to genius Ba in Cambridge today and they haven't any ideas other than replace for another £75! Could it be an LED problem or a loos connection?
Could be. Have you restored to iPod to factorydefaults/new iPod to rule out a software problem?
-
My ipad has completely blacked out but the sounds still work what can i do
Hello I have an ipad that has completely went hay wire and and the screen has completely turned black. But when I turn the ipad on the sounds work and everything. Can you guys or gals please help me out by answering my question of how to make my ipad have color again and not be completely black.
Try to reset it. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot (presuming it does)
-
My TC has amber light blinking, but the internet is working.
This Apple wireless device has a private IP address on its Ethernet WAN port. It is connected to a device or network that is using Network Address Translation (NAT) to provide private IP addresses. You should change your Apple Wireless device from using DHCP and NAT to bridge mode.
What should I do? I have the Netgear CG814WG which is a modem/router. I want the TC to be the main router, but I do need the Netgear to transmit a "G" network. Basically, I will have a dual network "G" and "N".Welcome to the discussions!
The normal method for constructing a network is to have the modem/router at the head end supply the DHCP and NAT functions while secondary routers are placed in Bridge mode. Your network would function correctly if the TC's connection sharing were set to Off (Bridge Mode). In this case, the Netgear would function as your main router creating a "g" network and the TC could be configured to "create a wireless network" which could be "n" if you desire.
However, you specify that you want the TC to be the main router, supplying the DHCP and NAT services. This might be possible if the Netgear can function literally as two completely separate devices; One a modem and two a router. Even then, the modem would need to be configured as a bridge since the TC would be furnishing the connection credentials.
And, it gets more complicated. Does the Netgear have this capability? Probably not as I quickly glance at the web page on the product. My impression is that it was likely designed to be an all-in-one modem/router. Do you have additional information to the contrary? -
I need help to know what iTunes Store i am associated with.
Well as I suspected I love OWC company I pulled out the mac hard drive , they offered me a Macdrive free trial program to check your drive on PC Windows and yesSSSSSSSSSSSSSSSSSSSSSSSS it all there nothing lost
woohooooo , thank you but nothing is dead, when you have faith , this was a prayer answered big time I wanted a pro so much and I get to use my 500 plust 250 plus 120 GB drives all of them
ladies and gentlemen and I get to keep the 2 GB in from my macbook 13 inch and sell all the parts
yipeee
thanks for the support, now the case is Solved. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -
I know this has been asked before, but still can't work out how to merge a split album
I've read all the guidance, but can't even find the buttons to push!
I am using the latest itunes for windows
Thanks,Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2 -
Unix command 'cd' doesnt seem to work in sqlplus
I have been using the "!cmd" where cmd is the UNIX command but it fails to work with 'cd'. Anyone know why or what I need to do to make it work?
Thank you!Not really a SQL and PL/SQL question, but ...
The !cmd syntax in UNIX flavours forks a shell, executes the command you specify, then returns you to the shell that you are running your sqlplus session in. The command works, but it does not get carried back to your main shell. You can see the output of the command (e.g. !ls *.sql), but you cannot do anything that changes the environment of your current session. -
My mom shut of Siri in the restrictions, but then she turned it back on, the problem is no matter how many times i turn my phone on and off, it still has voice control. Will someone help me?
When Siri is OFF, Voice control is automatically ON
-
when I was talking on phone, suddenly the phone was switched off.
i tried to switch it on but it gave the message....connect to itunes for set up.
when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
What to do now?????? Customer service people say..it is hardware problemIf it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem. -
I have I phone 4s and the speaker stop working suddenly, I can hear through the headphone but when I remove the headphone can not hear anything , please advice what is the problem? Thanks
Thanks for your reply, but what shall I do now ? I bought this phone from china's apple store, and I am in Egypt so there is no warranty for this phone in my county, please advice how can I solve this problem? Is there any troubleshooting tips I can follow to solve this problem ?
Thanks -
My Iphone 5 voice speaker is not working.I'm not able to hear the voice of the person calling.But when I put my iphone 5 on speaker mode, things seem ok.Please provide me some suggestions.
Hello rizvijunaid,
Thank you for providing the details of the issue you are experiencing with calls on your iPhone. I recommend following the steps in the article below for the issue you described:
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Thank you for using Apple Support Communities.
Best,
Sheila M. -
When my husband and I first bought our iPhones, I was the only one with an Apple ID (since he never used iTunes). He used my apple id to get apps. Now he has his own ID, but my apple ID email address keeps popping up on his phone when he tries to download an app. We do not want to have all of the same apps on our phones. How can we change the ID on his phone? I already tried going to Settings>iTunes &App Store> and changing the Apple ID to his account email and that did not solve the problem. To make things worse, I recently changed my Apple ID email address (without getting a new ID) and I do not remember my old password (and this is the address that is popping up on his phone). He does not have any music on his phone and all of the Apps that he has are free. Any help you could offer would be great (-:
All apps are forever tied to the Apple ID that bought them. To stop your id from popping up, you need to delete the apps on his phone, and then repurchase them under his account.
-
Recently got a new computer and downloaded iTunes. All of my music has downloaded from the cloud witht the exception of one song. I have tried transferring from my phone, but it won't work. How do I get it back without having to download again?
Thanks.If you do not have access to the iTunes Library on your Old computer... or its Backup...
See these 2 Links...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
If you do have access... See Here...
iTunes: How to move your music to a new computer
Or...
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
An Added Bonus is that you will have a Backup of iTunes.
Maybe you are looking for
-
All contacts lost for no reason on iPhone 4S. How do I get them back?
I have lost my contacts on my iPhone 4S. I was in my home using it for a game, when I went to make a call and realized all of my favorites didn't have names, only listed them by their numbers. I went into all my contacts and nothing was listed. I hav
-
It keeps saying I need to download Java but I'm not connected to the internet. I upgraded Java from the apple website but it's still not working.
-
Is there any standard report which give all information about purchase orde
hi is there any standard report which give all information about purchase order. i need following information from Purchase Order. Vendor No, vendorname, PO No, basic , Excise , insurance , Frieght. thanks .
-
Messaging Server and Calendar Server Mount points for SAN
Hi! Jay, We are planning to configure "JES 05Q4" Messaging and Calendar Servers on 2 v490 Servers running Solaris 9.0, Sun Cluster, Sun Volume Manager and UFS. The Servers will be connected to the SAN (EMC Symmetrix) for storage. I have the following
-
Urgent: JAAS Login Module Deployment Problem
Hi, I have developed a JAAS Login module for the portal (EP6 SP9 sneak preview) and i am getting the following error: GroupAssignmentLoginModuleLibrary does not exist in LoadContextWrapper.modifyName. com.sap.engine.services.security.exceptions.BaseS