HT201412 When power is connected and charging is on , the mobile response is very slow
I phone 5
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
Similar Messages
-
Cisco Unity Connection 8.0 / access to the user configuration is very slow
Hello!!
The access to the user configuration is very slow. When you click on an user it need about 2-3 minutes until the configuration sidewill be loaded.
What could be the reason?
How is it possible to load the user configuration a little bit faster?
A restart of the Cisco Unity Connection was done.
The user will be imported from the CallManager.
Cisco Unity Connection 8.0.2.40000-12
WebBrowser: Internet Explorer 8.0
Same result with Mozilla Firefox 3.6
Any ideas?
Thank you!!!
Joerg K.Hello Joerg,
could it be possible that you have some problems with the AXL integration for example wrong /dead server IP:
CSCth86004 Import page takes long time to load if AXL integration is broken
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCth86004
Kind regards,
Marcel Ammann
P.S.: Please rate helpful post's -
My MacBook will not turn on unless it's connected to a charger/power source. However, when it is on and charging, it says that it has 0% battery life despite the green light on the charger. How can I fix this?
Your battery has reached the end of its life. If you have a MacBook with the removable battery you can get a new third party battery fairly cheap on eBay.
Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
Or for $129 from Apple http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY -
First, I've read the manual. This new Nano won't sync and won't charge. Itunes does recognize the device. When it's connected to a Windows PC, the battery indictor shows charged. When it's not connected, the indicator shows no charge. I've tried this on two PCS without success.
Maybe the Nano you got is defective. Have it replaced.
-
i walked out of school and i was trying to get on my phone but it would not cut on.It was just a black screen.So when i got home and put it on the charger it keep vibrating but still a black screen. I called apple and everything i tried to restart still nothing HELP!!!HELP!!!!HELP!!!! i want my phone back
Did you ever figure out how to turn your phone on? Mine died today around noon for no reason. I'm so mad at it! I can't get it turned on, and I KNOW the battery is charged. Suggestions? I'm going to the genius bar (another trip completely out of my way) tomorrow morning. Suggestions?? Oh and please don't tell me to hold the "home" button and the "power" button together because I've been doing that all day. It doesn't work.
-
My FaceTime won't let me sign in, I verified my ID online but when I go to sign in on the iPad 2 it says unable to connect and Wont send me the email?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Cheers, Tom -
Last night I tried to sync my IPOD nano, and could not pull up the summary page. It would connect and charge the IPOD, but did not pop up as a "device" in the left column, so I could not click it and get to summary page and sync new music. Same laptop for a year, same IPOD, synced 3 days ago with no problem. Now all of a sudden, I can't sync. No message or other window pops up to tell me if something is wrong. How can I fix this?
Please authorize ADE 3 with same credentials that you used with older version of ADE
-
I just started getting two messages on my IPad and IPhone I can't get rid if .
1. " can't get email - connection to server failed " when I am connected and getting email . Have to click ok .
2. " pass word required " when it is not, have to cancel this constantly .Hello John,
this problem could probably be caused by a Firefox extension.
To make sure that no extension is causing the problems,
start Firefox in Safe Mode by following the instructions in the [[Safe Mode]] article.
Kind regards,
Tobbi
Firefox Support Volunteer -
Applications are mentioned free, but when we start downloading one dollar is charged in my credit card, but only for the first time when i switch on and use it for the first time one dollar is charged. and from next application it is free. why?
Kindly inform any email id or toll free number to contact apple for your below answer, Mr.King_Penguin
About receiving my credit card being debited for Free App Store Application downloads,
It should be within a few days, but it might vary a bit by bank/provider :
I am in India, if the bank don't refunds , what to do?
Rajagopal.pngr :- It is only a holding charge, it is not a permanent charge. If it isn't refunded within a few days or so (and it quite possibly won't be over a weekend) then you can query the charge with Apple. -
Device turns on, is connected and charged, but screen is black
Why is my screen black, while device is on, connected and charged?
You may need to reset it a couple of times, but I've had both my iPod and iPad do this. I'll put them on to charge, try to turn them on in the AM and be faced with a seemingly non-responsive black screen. In my case, I hooked it up to my computer, could see that the brains of the device was still alive and fine, just the screen wasn't working.
The reset brought both of them back.
Oddly enough for my iPod, I was having horrible battery life prior to this happening, after it my battery life was back to its pre-update levels. -
hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated
If your computer is running an OS X prior to Snow Leopard 10.6,
the answer (if it is an Intel-based Mac; not old PowerPC model)
would be to buy the retail Snow Leopard 10.6 DVD from Apple
for about $20, and install it. Then update that to 10.6.8 by using
the installed Snow Leopard online to get Combo Update v1.1 for
Snow Leopard 10.6.8. After that is installed & updated, run the
system's Software Update again, to see what else is available to
that system.
Later systems can then be looked into at Mac App Store, once
the computer is running Snow Leopard 10.6.8.
And if your computer is a Power PC (G4/G5, etc) and has no
Core2Duo kind of CPU -- See "About this Mac" in apple menu
to disclose the general info about your Mac. Also you can see
even more by clicking on "More Info" when looking in there...
If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
Hopefully this helps.
Good luck & happy computing! -
I just got an iPod touch. Now I cannot access my music on my Nano when it is connected to my computer (all the titles are in gray). How do I fix this?
That sounds like you've engaged one of the automatic syncing options for your nano.
Plug the nano in, and go into the Device screen for the nano in itunes. Is "manually manage ..." unchecked? If so, check the box for it, and click okay. Disconnect and reconnect the nano. Is the content on the nano able to be selected in your iTunes now? -
My project in imovie says source unavailable after I moved the events to the backup drive. It is connected and shows up in the events library. I can see the pictures but they won't play without the source. What do I do.
I moved it because I did not have room on my hard drive to import my latest video. I take videos my grandkids basketball games then edit them as projects. I don't have room to move the whole events library back to my hard drive. Can I move part of it at a time.
I filled up my 1 TB back up drive so got a 3TB to move my video projects to. Do I have to move both the i photo videos and the projects to the 3 TB drive together some how. When can I delete them off the hard drive .
I moved all the i photo library to the 3 TB drive and deleted them out of i photo. That is 87 GB which I don't have room for on my hard drive.
I think when I use the export movie to my hard drive it works but will I still be able to edit it later if I want. Is it best to do quick time or i tunes if I use the export feature. -
HI, I just bought an iPhone 4S. Although my iPad and other iPhone 3GS connect to our server (SBS2003) I cannot get through. It checks all items in the connection and then I get the message :Cannot get mail, the connection to the server failed." I Tried everything, rebooting, reset all iPhone, etc. All Apple devices work perfectly expect mine. Please advise
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom -
i have a problem when i am connecting my mbpr to a monitor , the internet is going very slow when i connect to the monitor plz help me if i buy a vga to minidisplay it will help??
dovdov2,
are you saying that when you connect your MacBook Pro to a monitor, your Internet connection slows down, but when you disconnect the monitor, it speeds up again, and that this is reproducible from one day to another?
Does this happen both under OS X and under Windows 7, or only under one of them?
How are you currently connecting your MacBook Pro to your monitor?
Maybe you are looking for
-
HT204053 Max number of devices on one iTunes account?
Max number of Devices on a single iTunes account
-
This happens every time when shutting down the system?
-
Acro Pro 9 won't flatten overprint
I've got a catalog PDF supplied from a printer that I need to prep for web distribution. The prepress for the project was a nightmare, particularly with a complex black vector object overprinting a spot color on every page. The overprint object is in
-
how do I restore my phone from icloud backup?
-
Will Nodeapps register the listener service of RAC database?
Hi Friends, In 10g RAC will Nodeapps register the listener service of RAC database? because if i bring down nodeapps the listenener is also going down ora....C1.lsnr application OFFLINE OFFLINE ora.rac1.gsd application OFFLINE OFFLINE ora.rac1.ons ap