HT201412 when turned on all I get is a white screen
My Ipod when turned on all I get is a white screen. I tryed to do a reboot w/power and home button and nothing
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
When turned on all I get is a white screen with a black strip...
I just bought a Macbook on 3 days ago and it was taken out of the box that night. I used it the next day and put it on my dresser until just now when I went to use it again. Any ideas?
Logic board malfunction. Take it back to the store and exchange it.
-
I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please
Can you still boot to the Recovery partition using Command and R whilst booting? Or did you wipe the Recovery partition as well?
If your Recovery partition is still intact, you can simply boot to it and reinstall the OS via the Internet. If you wiped the Recovery partition, you can hold down Command, option and R keys whilst booting and boot into true Internet Recovery mode. You'll be able to reformat the hard drive, erasing all partitions (format it as "Mac OS Extended (Journaled)" with a dingle GUID partition) and then reinstall the OS that shipped with your machine.
Note that you should use a physical Ethernet connection when restoring over the Internet - it's three times slower if you use wifi.
Try your Recovery partition first and if that doesn't work, use Internet Recovery.
Clinton -
when i active my mac pro all i get is a white screen and it loading and when it fully load its turn off , and it keep on doing the same thing for hours
Hi Shahenaz,
It's a little difficult to understand exactly what's going on with your mac based on the description you gave. Is there anything else you could add? Is it stuck in a reboot loop? Or is it just showing a white screen forever?
I had pretty much the same problem a few days ago, and was worried my mac was screwed permanently, but I got it fixed up no problem!
Follow these steps to try and troubleshoot/fix the problem.
1. Boot into OSX Recovery Mode
First, turn off your Mac. If it isn't responding, or is stuck in a reboot loop, just hold down the power button until it turns off, and you hear the fans stop. Then boot it while holding the Command and R keys. If it successfully boots into OSX Recovery Mode, continue with this step. If not, skip to step two. (My Mac couldn't successfully boot into the recovery mode, so I had to go to step 2)
Select "Disk Utility" from the list of options, and find your built in hard drive from the list on the left. Usually there are two listings/names for your drive. The first should be something like "500GB longchainoflettersnumbers Media". Then the one below will be a little easier on the eyes, named Macintosh HD, if you haven't changed its name. That's the one you want, click it.
Now go to the "First Aid" tab. Click on the "Verify Disk" button in the bottom right corner, and let it do its thing. Once that's done, hit repair disk, also in the bottom right corner. If your disk is corrupted, you may need to run the repair process several times, before it comes up completely clean.
Once this is done, select Shut Down from the Apple menu and, once your Mac is completely off, turn it back on like normal. If it works, great. If not, proceed to step two.
2. SafeBoot
Sometimes, when a mac is acting up and doesn't want to start, all it takes is a safe boot, followed by a regular restart. Or maybe you recently installed a program that either has malicious or errored coding that's causing your troubles. This is where Safe Boot comes in.
Turn off your mac, and reboot it while holding Shift. (If you want to see the process that's going on in the background, boot while holding Shift, Command, and V. This will enter something called Verbose Mode).
If it boots successfully into Safe Mode, great. If you believe that there's a particular program that you recently downloaded that might be causing your trouble, now's the time to delete it. If not, just reboot normally and see if it works! If it doesn't, or if your Mac didn't even Safe Boot like mine, proceed to step 3.
3. Fsck!
For this step, you're going to be booting your mac into Single User Mode. I'm not going to go into details as to what this step does, but it works for some people. Here are the steps.
Turn off your mac, and reboot it while holding Command and S. The screen should go black, and you'll see some white text run across the screen, wait a few seconds, until you see the command prompt. Now type
fsck -fy
and hit the Enter key. This will run a series of system checks, which could take a few minutes. Be patient on this part. Once it's done, it will show one of two messages:
1. "The volume (your Mac) appears to be OK
or
2. "File System Was Modified"
If you got message 1, type reboot and press Return. Hopefully your computer works after this - if not, proceed to step 4.
If you got message 2, run the same command again until you get message 1. If it doesn't seem to be working, turn off your system and proceed to step 4.
If you couldn't even boot into Single User Mode in the first place (like me), go to step 4 anyways.
Step 4: Reset the NVRAM
The NVRAM is another kind of RAM that stores data like the computer volume you had set before you turned it off, or the screen brightness, resolution etc. This memory is saved, unlike with regular RAM. Resetting it isn't harmful to your system, it will just put your screen brightness, volume, etc. to defaults.
Turn off your Mac, and reboot while holding Command, Option, P, and R, and continue holding them down until you hear the computer restart again.
I can't really explain why to do this step, I just know it works for some people, and seems to be what unbricked my MacBook Pro. If none of these steps, fixed your Mac, well the situation is looking pretty grim. Try setting up a meeting with a Mac Genius at your local Apple store. However, I know that many other people with these symptoms ended up having a logic board failure. Apple can swap out your logic board for a new one, but the price is pretty hefty, somewhere around $300 I believe.
Well I wish you luck, I hope this helped you! -
When i press sleep wake button to turn on my iphone 3gs all i get is a white screen
trying to open the phone to make a call or answer the phone when i press the sleep wake button all i get is a white screen and cant do anything with the phone constantly turning phone on/off eventually my home page does return anyone know why and what to do.. thanks to all
MacBook Air Mid 2012?
"Apple has determined that certain 64GB and 128GB flash storage drives used in the previous generation of MacBook Air systems may fail. These systems were sold between June 2012 through June 2013."
http://www.apple.com/support/macbookair-flashdrive/ -
When i turn my touch all i get is a white screen help
when i turn on my touch all i get is a white screen help
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad.
There's more to try but let's go a bit at a time. -
Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works can you help
Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!
-
My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings
Sammyhunter lets get you back in action! Has there been any physical/water damage to the device? Try pressing and holding the home and power button together. Once the Apple symbol appears release both buttons. Keep us posted!
AshleyS_VZW
Follow us on Twitter @VZWSupport -
I need to know how to fix my iphone4 I was playing one of my games and a up date poped up I pushed on the up date when it restarted all I have is a white screen with four black dots and all the driffent laughes and a i with a blue circle around it I can not make any calls or get any calls or any thing
I don't have apps on my phone so i can;t do anything
-
****,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?
There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
http://www.apple.com/support/systemstatus/ -
My 1st generation Ipod touch won't turn on at all and whenever I press the buttons to reset it all I get is a white screen, or a white screen with black lines across.Help pleaseeeeee!
You can work through the five 5 R's of troubleshooting to rule out the possibility of corrupted software.
http://www.apple.com/support/ipod/five_rs/
It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
http://www.apple.com/support/ipod/service/prices/
Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity. A third party service will actually replace the damaged part for a little less. Google "iPod screen repair" and you should get a number of results to work with.
B-rock -
When I open safari I get a blank white screen.
When I open safari I get a blank white screen. When I open top sites, and choose google, the screen is still blank, with the search bar at the top a quarter full. If it does open, it suddenly becomes unresponsive and returns to that blank, white screen. I'v tried everything I can think of, but nothing works.
On a side note, everything from mail to iphoto to word works - just not safari. I'm using a mid-11 iMac 21.5"i5 running on mountain lion.
Also did I post this in the right place? I'm new to this.Read this whole message before doing anything.
Back up all data.
Quit Safari if it’s running. Then select
▹ Force Quit…
from the menu bar. A small window will open with a list of running applications. Safari may appear in that list, even though you quit it. If so, select it and press return. Close the window.
Step 1
In the Finder, press the key combination shift-command-A to open the Applications folder. Select the Safari icon in that folder and press the key combination command-I to open the Info window. There’s a checkbox in the Info window labeled Open in 32-bit mode. Uncheck it, if checked. Close the Info window and the Applications folder.
If Adobe Flash Player is installed, select
▹ System Preferences ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Delete the following items from the Library folder (some may not exist):
Caches/com.apple.Safari
Caches/com.apple.WebKit.PluginProcess
Caches/Metadata/Safari
Preferences/com.apple.WebKit.PluginHost.plist
Preferences/com.apple.WebKit.PluginProcess.plist
Saved Application State/com.apple.Safari.savedState
Leave the Library folder open. Try Safari again. If it works now, stop here. Close the Library folder. If you still have problems, continue.
Step 2
Triple-click anywhere in the line below to select it:
open $TMPDIR../C
Copy the selected text to the Clipboard (command-C).
Quit Safari again. Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). A folder should open. If there's a subfolder with the name "com.apple.Safari", delete it, even if it's empty. Quit Terminal. Close the folder. Launch Safari and test.
Step 3
If Safari still doesn’t work right, quit, go back to the Finder and move the following items from the open Library folder to the Desktop (some may not exist):
Cookies/Cookies.binarycookies
Internet Plug-Ins
Preferences/com.apple.Safari.LSSharedFileList.plist
Preferences/com.apple.Safari.plist
Preferences/com.apple.Safari.RSS.plist
Preferences/com.apple.WebFoundation.plist
PubSub/Database
Safari
(Note: you are not moving the Safari application. You’re moving a folder named “Safari.”)
Try again. This time Safari should perform normally, but your settings and bookmarks will be lost. The default set of bookmarks will be restored. Delete them all.
If the issue is still not resolved, quit Safari again and put all the items you moved to the Desktop back where they were, overwriting the newer ones that may have been created in their place. You don’t need to replace the files you deleted in step 1. Stop here and post again.
If Safari is now working normally (apart from the lost settings), look inside the “Safari” folder on the Desktop for a file named “Bookmarks.plist”. Select
File ▹ Import Bookmarks
from the Safari menu bar. Import from that file. Recreate the rest of your Safari settings. You can then delete the items you moved to the Desktop.
Note: This step will remove your Safari Extensions, if any, and their settings. If you choose to restore them, do so one at a time, testing after each step to make sure you haven’t restored the problem.
If you don’t like the results of step 3, you can undo it completely by quitting Safari and restoring the items you moved or deleted in that step from your backup, overwriting any that were created in their place. -
I can't log on to my I mac Desk top, every time I switch it on all I get is a white screen with the apple log , can anyone help pls?
Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there. -
After refusing an update now all I get is a white screen with the firefox logo. If I have to reinstall firefox 3.66, how can I transfer my firefox profile with bookmarks etc, to the new installation?
== This happened ==
Every time Firefox opened-> press '''F11''' to bring the computer out of FullScreen
-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> go to View Menu -> '''Zoom''' -> click '''Reset''' -> '''Page Style''' -> select '''Basic Page Style'''
-> go to View Menu -> Toolbars -> select '''Menu Bar''' and '''Navigation ToolBar''' -> unselect All Unwanted/Incompatible Toolbars
-> go to Tools Menu -> Options -> General -> '''When Firefox starts : select "Show My Home Page"''' -> Type the address of the website which you want to be your HomePage e.g. http://www.google.com
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Remember History"'''
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons)
-> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona)
Now Restart Firefox. Check and tell if its working. -
My pro crashed. When I restart all I see is a white screen.
My pro crashed. When I restart all I see is a white screen. How can I get it restarted?
Try
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp2580.html
Maybe you are looking for
-
Why is RemoteException suppressed?
Hi, I'm using Weblogic 5.1.If I have a Weblogic RMI client talking to a Weblogic RMI server, and the server goes down, the client will hang went it tries to invoke a method on the no-longer valid remote object in that server. In the Java RMI implemen
-
Palm TX can connect but can't get any web sites
Hi, I was just able to get my Pam TX to connect to my home network, by manually entering the IP address. Now it instantly says "cannot find requested page" as soon as I enter any web address. Am I missing something? Is there something I need to upg
-
Purchase Order most recent date
Hi, I have a report and want to retrieve a list of Purchase Order numbers related to several items. However, I don't want all the POs, but I only want the most recent PO for each item. I am trying the following: SELECT docnum FROM opor WHERE docdate
-
Hi I want to take data from a mySQL database and show it in an applet as a graph. The problem I'm having is creating the graph. Does anyone know a fairly simple way to do this? thanks
-
Planned order availability check
Hi All, The planned order generated is checking for the availability of raw materials ., Im presently changing the planned order start date and finish date according to the commited date getting from availability check for components The issue is the