HT201412 why my ipad briefly shows apple icon when turned on, then displays a picture of a plug, plugging in an itunes circle icon

lMy ipad would not respond after leaving it for a brief minute.....screen was black, so I plugged it into power source thinking battery needed charging, when I did this, a picture of a plug, plugging into an itunes icon (circle) and nothing else happened. I pushed button to turn off power, then back on.....at this poing an apple icon came up, went away and the plug showed up again. Anyone know what I need to do to restart ipad?

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097

Similar Messages

My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Why does my iPad show no sim when turning on cellular data?

Why does my iPad show no sim when turning on cellular data?

Check the right and left sides of your iPad for a small hole the size of a paper clip (remove your smart cover if you have one). If you see this, then you have the wifi + cellular model. If you do, use a paper clip to remove the sim tray (or the sim removal tool that came with your iPad if you have it) as shown in the image below.
If the tray has a sim card in it, push the sim tray back in to re-seat it in the side of the iPad, then turn it on to see if the error message re-appears. If it re-appears, take it to a Verizon store and have them give you a new sim card.
If you have a sim tray but it is empty, you'll need to go to a Verizon store to get a sim card for it.

My ipad kept showing apple logo n no red slide in appears

My Ipad kept showing apple logo and no red slide appears.
Pls help.

Unable to Update or Restore
http://support.apple.com/kb/ht4097

AppleTV 3 only showing Apple logo when connected to very new Panasonic plasma - worked Ok with older Panasonic (2007)

AppleTV 3 only showing Apple logo when connected to very new Panasonic plasma - worked Ok with older Panasonic (2007) - have reset AppleTV, tried 3 HDMI cables.

Tried again as you suggested - no luck. Ref sequence below
A. Pressed menu & down to reset Apple TV
B after reset & restart pressed menu & up buttons to change resolution. After pressing both buttons for 6 sec, LED starts flashing - released both buttons. TV screen blank. After 20 to 30 sec horizontal lines came on screen remained for 20 sec then screen again went blank. Waited for couple minutes. LED still flashing - pressed Menu button for 2/3 sec - flashing stopped & LED glows continuously. Screen blank
C. Reset the unit again by pressing menu & down. When it restarted - while LED was still flashing, got orange color screen with Apple logo in the middle. This screen remained till LED stopped flashing & then screen went blank

I have a new iPad and tried to set up as new, then realized i needed to sign in as an existing itunes user. I reset my new ipad as new, but now when I sign in using my existing ipad it backs up to the new one I just set up. I need my itunes on new iTune

I have a new iPad and tried to set up as new, then realized i needed to sign in as an existing itunes user. I reset my new ipad as new, but now when I sign in using my existing ipad it backs up to the new one I just set up. I need my itunes account on my new ipad. help

You want to restore from the backup. Do not set up as new. You can read the article that Tom posted above, but it really is pretty simple.
Transfer any purchases from the old iPad into iTunes, backup the old iPad in iTunes and them sync one more time.
Connect the new iPad and when prompted during activation, restore from the backup that you just created and then sync with iTunes.
The new iPad should be identical to the old iPad, but you will have to enter some passwords again on the new device.
Transfer purchases.
http://support.apple.com/kb/HT1848
How to backup and restore from a backup
http://support.apple.com/kb/HT1766

Why is my Mac Air still hot when I put then in sleeping mode?

Hi,I wonder why is my Mac Air still hot when I put then in sleeping mode?

I just looked in my history - can't find the link. I was googling for about 15 minutes out of curiousity before.. just researched more though. I think its an integrated circuit (the IC part) that is a combination of both analog and digital die sensor readings:
"Many embedded systems need to read sensors that produce analog signals. Since processors are built to interpret and process digital data, i.e. 1s and 0s, they are not able to do anything with the analog signals that may be sent to it by a device. So the analog to digital converter is used to convert the incoming data into a form that the processor can recognize."
Analog Die - Analog : 125
CPU Die - Digital Core : 129
x19 controller IC: 264
125 + 129 = 254....close....
Thank you for asking! You spurred further investigation
And your computer temperatures look absolutely fine. I wouldn't worry at all.
Microcontroller converts digital-temperature-sensor
microcontroller-based temperature ...
An introduction microcontroller-based temperature ...
http://en.wikipedia.org/wiki/Microcontroller

HT201412 Why does my iPhone show me a solid red screen

Why does my iPhone show me a red screen

What do you mean a solid red screen?
that maybe a hardware or software issue,
http://support.apple.com/kb/ts2802 - for hardware trouble shooting
try to do a restart and a reset first.
http://support.apple.com/kb/ht1430
http://support.apple.com/kb/ht1414 - for restoring (to isolate it from being a hardware one.)

TS1538 Trying to restore ipad 2 itunes recognizes ipad message is "waiting for ipad..." Ipad only shows apple logo.

Ipad 2 will not turn or restore. itunes recognizes ipad is in recovery/restore mode and is trying to restore ipad. Itunes has "waiting for ipad..." in the progress bar. Ipad only has apple logo on screen.
Help!!

Unable to Update or Restore
http://support.apple.com/kb/HT1808

HT6058 During the installation of the ios 7.0.4 update my screen froze with the iTunes icon and arrow under that and a picture of the usb plug under that. Thanks for messing up my perfectly well functioning IPad 2 with your lousy update! What now?

During the ios 7.0.4 update, my IPad 2 froze. The picture on the screen is an iTunes icon, and arrow inder that and a picture of the apple usb cord. It will not go away. I have tried hard and soft turn offs. Please help!

Philly:
When there is an iOS update available, iTunes asks if you want to install it. I chose to only download the iOS 7.0.6 update, but not to install it until I had done a backup of everything on my iPad. When that iOS 7.0.6 update failed, I had NO iOS at all, just a bricked iPad.
When my son did a "clean restore" that was the same thing you'd do to wipe an iPad - just install iOS 7.0.6 and install basic iPad apps. When you turn the iPad on after that, it indicates it wants to be connected to iTunes. At that point, my son yanked the cord so nothing else was installed. Then, with iOS 7.0.6 already installed, iTunes on my PC didn't say it wanted to update iOS, and allowed me to choose my previous backup to be restored. All was straightforward after that.
Again, there are places on he web where you can download various versions of iOS, along with a PC utility that will do the iOS update. I think these utilities are for when you want to hack your device, so I'm not crazy about this approach.

Starts to boot, shows Apple logo for 2+ minutes, then starts again

Yesterday the computer started to boot up as usual with the 'boot chord', Apple logo, then the screen went black, and started over again. This time it successfully booted and ran normally for the rest of the day. This morning, it never gets beyond the boot process; i.e. start chord, Apple logo for several minutes, then black screen and the whole process repeats over and over again. Front panel status LED is on and steady. I tried 5 different boot disks (internal HD, two external SuperDuper clones, a DiskWarrior DVD and the OSX 10.6 install disk and the results were the same. It is still under extended warranty, but I can't afford the downtime for Apple to repair it. Any idea what might be wrong? Any thing else I might try to get it going again?

Hopefully the Time Machine backup is intact and the computer will continue to work with it connected (requires a 3rd party eSATA RAID controller card). Assuming all the hardware works, I am unclear how best to restore the app's from the TM backup.
The official way to do a full restore from TM is to boot from an installation DVD and select "Restore from Time Machine" from the Utilities menu. I don't see how that will work if your backup is on a third-party RAID, because the controller requires a driver that isn't on the DVD. That may be why you can't boot from the DVD.
I think your best bet is to clone the installation disc to a bootable volume and install the RAID driver on it. The volume could be hosted on an external storage device or burned to a DVD. See here for an example of how to do this.

IOS (iPads) always show "in progress" when enrolling

Set up Server 3 on a Mac Mini. Profile Manager enrolls OSX (Macbook) with no problem. iOS (iPads), on the other hand, always show "in progress" when enrolling. Any suggestions on what could be causing this?

Same issue here, profile manager is working fine for iphone and macbook, but any tasks sent to the iPad Air just sit there "in progress" forever...
The enrolment is still "in progress" but the device appears in the list, doing an update info or trying to send settings to it (which is also triggered with the enrolment) also sits "in progress" and the settings never arrive.
It can't be a firewall issue, as the iphones are working just fine, in the same environment, i'm stuck...

Ipad asking for apple id when app is launched

All of the sudden our ipads are asking for the Apple ID when a student tries to launch an app.

Having this exact same issue that literally popped up over night. I have 24 iPads in a classroom that I use Apple Configurator with. I've not had any problem up until the last couple days. Various apps, when opened will prompt for an apple id and password. If the student hits cancel, the app shuts down.

My iPod says "cannot be synced. The required file cannot be found. Always when half way through a sync. It also shows apple logo when I try to access photos and I think the issues are linked. Any ideas?

My iPod says "cannot be synced. The required file cannot be found" it also defaults to apple logo when I try to access photos. I think the issues are linked. Any ides?

So you have tried removing/trashing your iPod's photo cache? See here for more information on where to find this file.
iTunes: Understanding the iPod Photo Cache folder
B-rock

Why did my number show as private when I didn't dial block n my settings are not block

I never call block but this morning I made a calk yo my boyfriend n he said I was showing as private I didn't block my number n my settings are not as private

You mean you don't have Show My Caller ID turned off at Settings > Phone > Show My Caller ID?
If not, contact your carrier.

HT201412 why my ipad briefly shows apple icon when turned on, then displays a picture of a plug, plugging in an itunes circle icon

Similar Messages

Maybe you are looking for