HT201413 ERROR 1012
Received error message after clicking on UPDATE in APPLE STORE: The operation couldn't be completed. (NSURLErrorDomain error -1012.)?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.
Similar Messages
-
Oracle error 1012 ("Not Logged On") & AUTOTRAN=Y
Hi.
I have a problem trying to access an Oracle 8.0.6
database from a 6.5 Tuxedo server.
Both TMS and server execute tpopen correctly
All services are declared as AUTOTRAN
Everything seems to be OK according to the logsgenerated by Oracle XA libraries
However, I always get the Oracle error 1012 ("Not Logged On")
when executing SQL statements from my pro*C server.
I just can't figure out why this error occurs.
I also tried to explicitly open a transaction from the client,
but the result is exactly the same (tpbegin is successfull,
however).
Could someone help me to make this work ?
Thanks.Solved by removing "DB=<db>" from my OPENINFO string, as far as this parameter
should only be used when using proc*C "EXEC SQL ... AT <db>" statements.
"Mathieu Chauvin" <[email protected]> wrote:
>
Hi.
I have a problem trying to access an Oracle 8.0.6
database from a 6.5 Tuxedo server.
Both TMS and server execute tpopen correctly
All services are declared as AUTOTRAN
Everything seems to be OK according to the logsgenerated by Oracle XA libraries
However, I always get the Oracle error 1012 ("Not Logged On")
when executing SQL statements from my pro*C server.
I just can't figure out why this error occurs.
I also tried to explicitly open a transaction from the client,
but the result is exactly the same (tpbegin is successfull,
however).
Could someone help me to make this work ?
Thanks. -
NSURLErrorDomain error -1012 keeps coming up when I go to the app store to check for any updates.
When I go to the App store to check for any updates it will not proceed and gives me the following error message NSURLErrorDomain error 1012.
Can anybody help please.
Thanks,
BernardI am receiving the same error when I try to refresh the updates page but was able to download the Digital Camera Raw update without issue (this update was displayed on the page).
Have not tried the 10.9.3 update...
Curt -
Suddenly started receiving a error message when checking for updates in app store nsurlerrordomain error - 1012 how to fix?
Thanks Linc I will sit tight for a while to see what happens before chasing up customer service. Cheers.
-
Error report (NSURLErrorDomain error -1012.)
when I share a video from Final Cut Pro to Vimeo it fails and generates an error report (NSURLErrorDomain error -1012.). What does this mean and how can I resolve this?
Triple-click anywhere in the line below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
Post any lines of output that appear below what you entered — the text, please, not a screenshot. -
Hi,
in 8.1.7 I want importe a table then I have this error :
import done in WE8DEC character set and WE8DEC NCHAR character set^C
IMP-00017: following statement failed with ORACLE error 1012:
"CREATE TABLE "TRAILOCC" ("TO_REF" NUMBER(12, 0), "TO_ENTITY" CHAR(40), "TO_"
"DATE" DATE, "TO_TIME" DATE, "TO_OCC" LONG) PCTFREE 10 PCTUSED 40 INITRANS "
"1 MAXTRANS 255 NOLOGGING STORAGE(INITIAL 723025920 FREELISTS 1 FREELIST GRO"
"UPS 1) TABLESPACE "PROD_DATA""
Can I then create this table TRAILOCC with INITIAL 223025920 and then importe the table ?
What should I add in imp command to importe just data since table is already created ?
Many thankshi
cmd> imp ignore=y
hope this helps
Tajcheck the prod_data tablespace has enough space -
I can't access the software updates available. I'm getting the message: (NSURLErrorDomain error-1012.).
What can I do to find resolution to the problem?Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
-
Server error[1012]:Essbase error[1260052]
Dear All,
We created a report in Hyperion Interactive reporting using Hyperion Essbase as database connection file .
We have a substitution variables in Essbase.We want to use the Substitution variables ("CMonth","CYTD") in IR report Substitution variables were already created in Essbase.
In Query when i select Period dimension i saw an option called Substitution variables i selected the variables("CMonth","CYTD").When i hit process button i am getting the following error Message
"server error[1012]:Essbase error[1260052]:Syntax error in input MDX query on line 2 at token 'OctYTD'
Please let me is there a better way to bring the variables in Query.
Any suggestions to resolve issue will be really helpful.
Thanks in advance
Regards
VamsiHello Pros,
I am new to ASO and would like to know this simple formula where i am making a mistake.
IIF(Withattr([Date],"<",[Date_01-01-2013],1,0)
over here Date is attribute dimension which is associated with Entity dimension. I am trying to apply the formula on account saying in which Entity the date is less that 01-01-2013 put 1 else but 0. but i am getting syntax error and not able to figure out. any help will be great. -
BR0301W SQL error -1012 at location db_file_switch-15, SQL statement:
Dear all ,
offline Backup finished with error .
kindly find the below logs
#BEGIN /oracle/IRP/sapdata3/undo_1/undo.data1
BR0280I BRCONNECT time stamp: 2010-02-07 03.00.28
BR0307I Shutting down database instance IRP ...
BR0280I BRCONNECT time stamp: 2010-02-07 03.02.39
BR0308I Shutdown of database instance IRP successful
BR0280I BRCONNECT time stamp: 2010-02-07 03.02.39
BR0301W SQL error -1012 at location db_file_switch-15, SQL statement:
'SELECT NVL(BYTES, 0) FROM DBA_DATA_FILES WHERE FILE_ID = 2'
ORA-01012: not logged on
BR0280I BRCONNECT time stamp: 2010-02-07 03.02.39
BKI0023I: Time: 02/07/10 03:04:09 Done: 9.766 GB (6.8 %) of 142.774 GB. Estimated end time: 02/07/10 03:58:24.
BKI0053I: Time: 02/07/10 03:04:09 Object: 1 of 46 done: /oracle/IRP/sapdata3/undo_1/undo.data1 with: 9.766 GB saved with description IRP___A0G5CX5F1D.
BR0280I BRCONNECT time stamp: 2010-02-07 03.04.11
#END /oracle/IRP/sapdata3/undo_1/undo.data1
BR0280I BRCONNECT time stamp: 2010-02-07 03.04.11
BR0280I BRBACKUP time stamp: 2010-02-07 03.04.11
#FILE..... /oracle/IRP/sapdata3/undo_1/undo.data1
#SAVED.... IRP___A0G5CX5F1D
BKI0027I: Time: 02/07/10 03:04:11 Object: 2 of 46 in process: /oracle/IRP/sapdata2/sr3700_5/sr3700.data5 Size: 4.336 GB, MGMNT-CLASS: WEEKLYMGMTCLASS, TSM-Server: PRODORADB_TDP@10
BR0280I BRCONNECT time stamp: 2010-02-07 03.04.13
#BEGIN /oracle/IRP/sapdata2/sr3700_5/sr3700.data5
BR0280I BRCONNECT time stamp: 2010-02-07 03.04.13
BR0301W SQL error -1012 at location db_file_switch-15, SQL statement:
'SELECT NVL(BYTES, 0) FROM DBA_DATA_FILES WHERE FILE_ID = 28'
ORA-01012: not logged on
regardsHi
Have a look at note : 1235951
what version of the Brtools are you running ?
Mark -
(NSURLErrorDomain error -1012.)(-1012) what is this and how do i fix this
my iMac app store has 1 update for Safari, iTunes, and iphoto. When i click update...this pops up
(NSURLErrorDomain error -1012.)(-1012) what is this and how do i fix thisWait until Apple fixes this issue.
Best. -
I get this error when installing the latest JAVA update:The operation couldn’t be completed. (NSURLErrorDomain error -1012.)(-1012)
Found it! Turning of Kaspersky antivirus fixed it. Seems to be a port issue.
-
When attempting to upgrade to 10.9.3 my Aple Store app locked up and gave me an error code of NSURLE ERROR Domain error-1012. It still thinks I need the upgrade even thogh I have successfully downloaded and installed it through another source. How can I correct this?
Hi,
That's because the download on the App store is to bussy.
I hat yersterday the same message ... after a fuw hours everything whas back to normal.
This is NOT your Mac or internet connection.
Dimaxum -
NSURLErrorDomain error -1012. What does this mean?
I'm trying to make a call to an OData resource using the OData iOS SDK and every call gives me this error code:
The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
What does NSURLErrorDomain error -1012 mean?
Thanks!Most of these kinds of things are in the documentation - from the Foundation Constants Reference:
`Returned when an asynchronous request for authentication is cancelled by the user.
This is typically incurred by clicking a “Cancel” button in a username/password dialog, rather than the user making an attempt to authenticate.` -
The most recent update I have in the App Store is an OSX update but I receive this error message when I select the update button. (The operation couldn’t be completed. NSURLErrorDomain error -1012. -1012. Can anyone tell me why or how to delete this update in the que from the app center and try again? Any help would be greatly appreciated. Thanks.
http://www.apple.com/support/mac/app-store/contact.html?form=account
-
What does this error message when I try to do updates mean? And how can I fix it? Thanks. (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
James
maverick 10.9.1Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.
Maybe you are looking for
-
Hi, Can you help me on what methods of FMs to use? I need to have a report that will be displayed on screen, can be e-mailed, and can be printed. It has a header and a footer. The header has a logo on the left side and has header texts that are posit
-
Identifying text file names and importing on single Excel sheet
Hey! Does anybody can help me with Excel VBA macro code in order to import data from text files into single Excel spread sheet? I want to create User Form where user can select start and end date of interest and macro code will import bunch of text f
-
Warning after update to 10.10.3
When I rebooted after installing this latest update, a warning was given about an incompatible Rapport Preferences Pane (I believe but cannot remember the exact wording). I found the reference and deleted it. I have had problems with the Trusteer Rap
-
I just joined the Photoshop photography program. How do I download Lightroom? When I get the install the standalone program, it ask for a serial number.
-
Location service fees (JSR-179)
How do we determine costs associated with using the LocationProvider class? I'd like to have an idea during the design phase at the very least, and at most, be able to know at runtime so I can throttle requests based on costs of a particular user's s