HT201413 i tryed to restore my phone but it turns of during the process and an error happens so what should i do
i tryed to restore my phone but it turn off during the process and an error happens so should i do ?
Hello there, VladlsSwag.
The following Knowledge Base article provides some steps for troubleshooting your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Similar Messages
-
phone on syncing contacts for 5 hours? what's up?
Something's probably wrong with the program; Close it and reboot, or you may need to reinstall iTunes.
-
I am trying to restore my phone, but when i go to do it on iTunes, it Updates to 4.3.3 however everytime the 2 and a half hour update finishes, it FAILS. So the update fails, and the restore fails. Its happened 4 ties.
Im trying to restore my phone, because it says my memory is full when its not and an online solution says to restore. I cant restore because it wont let me update.
Im so frustrated, i cant take any pictures, download any music or apps, and its really getting me down. Please can someone help.This error generally indicates a hardware failure. Bring the phone to Apple for evaluation.
-
My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?
Hi sunnylordz,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying.
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
Cheers,
Mario -
I,m trying to restore my phone but I keep getting Error code 21.... help please iPhone 4S
Take a look at this Apple doc -> iTunes: Specific update-and-restore error messages and advanced troubleshooting
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
You could just update or uninstall the security software on your computer and then test again. -
I forgot my passcode, so I was unable to access my phone. I then tried to restore it, but it has frozen during the process. It won't connect to my mac again and I can't stop the process because my lock button is broken. What do I do?
My first advice is "Back up the device, then have it replaced." Second item of advice, "Don't forget your passcode."
One of the purposes of the lock button is to recover from certain software failures. Without the lock button, such a recovery is nearly impossible. My advice would have served you best when the malfuction first developed, not after you forgot your passcode. -
the right windows, to create pdf, proof shett etc, is disappearance. I tried with restore work areas, but nothing, I have update the program but not solution...what can I do?? I have photoshop CS6 permanent licence for win 7
I did try to uninstall and reinstall. It messed up my computer. I had to "RESTORE" from the prior days backup. This was not helpful at all. I'm used to losing all my stuff when I connect to iTunes, that's a whole other issue, but now I'm completely banned from any updates to my phone at all. Geeze.......
-
I have a MacBook Pro 2007 and I installed Mac OS 10.6 but I lost power in the process and now the mac doesn't recognize my hard drive, how can I fix this
I've tried it but since I'm using a USB disk drive it keeps freezing up or showing you a folder blinking folder with a question mark. (?). When I start the mac up I hold the control button until the Mac OS install disk shows up. My hard drive doesn't show up anymore. Is there any other button I have to hold down to bring a different menu up. I have also tried to boot up holding control and C and nothing happens. Thanks for the help so far
-
I bought a new computer and I'm attempting to install my older Adobe products that I still use, Adobe Acrobat 7 is the issue for now. I followed the instructions on the Adobe site for installing the older apps, but the installer isn't recognizing my product serial number as a valid serial number. I tried entering it with and without the dashes and neither methods work. What should I do now?
You cannot use your original files and serial number. See the following for the files you need and the associated serial number(s)....
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l -
I've erased all my content and settings but back up doesnt finish the process to set it up. What can i do ?
You have two choices. You can select another backup. I believe that your three most recent backups should be presented as choices. If for some reason you only have one backup and it will not restore, you have to restore as new.
Do you see other backups when you are at that step in the activation process? -
i need to authorize my computer but i am unable to do so as i am authorized to many times but i can't authorize the other computers because they are broken, what should i do?
About Authorization and Deauthorization.
Follow the instructions in the above link to deauthorize all and then authorize only the computers that you physically have access to and need authorized. -
I have paid for the photoshop, but I haven't received the E-mail of its installation. What should I do? or could you please resend the e-mail for me?
Video apps in the Cloud suite (such as Premiere Pro and After Effects) are 64 bit only and will only run on 64 bit processors and 64 bit operating systems.
If your computer is running a 32 bit operating system (e.g. Win 7 32 bit) then you will not able to download those apps since they will not run on your computer.
http://www.adobe.com/products/creativecloud/faq.html#desktop-products
Which desktop applications in Creative Cloud require 64-bit operating systems?
With the new CC apps, most of the pro video and audio applications now require 64-bit operating systems to run. These native 64-bit applications include Adobe Premiere® Pro CC, Adobe Audition® CC, After Effects® CC, Prelude® CC, and SpeedGrade® CC. Flash Professional CC, Photoshop CC and Lightroom® also require 64-bit on Mac OS. -
i was trying to restore my phone and it was connected and everything and i went to restore it and after a couple of minutes something popped up saying it couldt restore. i looked to my phone screen and it looked as if the phone was going to restore but the screen never changed and after an hour, it still hasn't changed. i tired holding down the lock button but that didnt do anything. then i tried hooking it back up to itunes but itunes doesn't connect to it and my computer doesn't detect a connected device. What happened and how can i fix it?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
i have forgotten my passcode and im trying to restore my phone with itunes but its saying i cant because i need a passcode why?
iOS: Forgotten passcode or device disabled after entering wrong ...
-
HT4623 I am trying to update my phone, but it is stuck on the terms...
I am trying to update my phone, but it is stuck on terms and conditions. I press agree and it just stays on that page no matter what I do.
Any suggestions?Hi, Yvonzabeth.
I would recommend trying the steps in the article below.
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Once these steps are processed, attempt to accept the terms and conditions.
Cheers,
Jason H.
Maybe you are looking for
-
Help! I 'm using an old G4 powerbook, Mac OSX 10.5.8, iTunes ver 10. I have multiple iTunes libraries on an external drive. Everything was fine for a while, then all of the iTunes library files, i.e. iTunes Library.itl, xml, itdb, artwork folder, Med
-
My SLi issue and what seems to have solved it.
I've had my new xpower motherboard for a few weeks now. From the very first day everything has worked with one exception. When I put a second GTX 460 Hawk on the system for SLi problems began. The first thing I noticed was the computer would take
-
No audio through tv from mac mini
I recently purchased a Samsung 32" model 5300 Smart TV, and I have a Mac Mini that are connected by a HDMI cord. The audio portion (while in the computer mode) will not come through the tv only the mac. I had a non "smart" with no built in wi fi an
-
Hi Experts, I am trying to put some kind of delay in my workflow using manualaction timeout option but that is forcing IDM to display a page with the checkbox and Save and Cancel buttons. It is also displaying all the variables available to the workf
-
Hi all, We need to do extracts from GLPCA by an external connector (Qlickview) on a regular basis (daily or weekly) but we dont have any good indexes to use. Currently we are searching using fields RLDNR, RRCTY, RVERS, RYEAR, RBUKRS and perhaps POPER