HT201415 Carrier not available

I have an iphone 4 and its carrier says not available. What should i do ? Thanks

Ask the person you bought the phone from.  That person would be the best source.
Again sounds like you bought a phone that is still lock to a carrier.   I would suggest you return the phone and buy one in your country, so you can use it with your phone carrier.

Similar Messages

  • Iphone 4 ios 6.1.3 carrier Not available

    Dear ALL,
    My iphone 4 IOS 6.1.3 updated in lost night jailbracked But my phone sim - No Service. -carrier Not available. Please Help me any One .Thanks to All.

    If your phone was jailbroken then discussing jailbreaking is against the terms of use of this forum.  You are on your own

  • Unlocked Iphone says Carrier: Not Available

    Hello everyone! I bought 1 month ago an unlocked Iphone 5C from the apple store.
    When I was looking in settings < general < About I saw that under Carrier it says Not Available instead of Carrier 13.0
    I am very worried... Is my device unlocked? What happened? The only time I inserted a Sim Card, it was for setting it up. I inserted a Virgin Mobile SIM card
    What can I do now? Please give me am answer because I am worried.

    Is there a sim associated with an active wireless account in the iPhone?
    If no sim, there will not be a carrier shown.

  • My iPhone 4 is carrier not available what can I do pls help me

    Hi pls help me
    <Edited By Host>

    First, I'd recommend taking your serial number out of your post.  It has nothing to do with your issue, and you're revealing personal information on a public website.
    Second, check for a carrier settings update.  Go to Settings > General > About.  If there is a carrier update available, it should automatically display a prompt.

  • Iphone 4 carrier not available

    Hello,
    My iPhone 4 was working fine and I don't had slide up menu for that I update the phone to iOS 7.1.2, once the update installed to my iPhone 4 I lost my carrier.
    I checked for carrier updates but none available, connected to iTunes but nothing happened, no new updates are available. I reset my iPhone's networks setting and 2 time reset all setting but still it not giving me any clue.
    I am sharing the screenshot for better understanding:
    https://www.dropbox.com/s/s4auzx4p8a7iyuh/IMG_0001.PNG?dl=0
    What should I do ? require help!
    Best Regards,

    Hello ActivePrime,
    If you are still getting this No SIM message in the upper left corner, I would like to recommend the troubleshooting information in the following article:
    If you see 'No SIM' alert on iPhone
    If you see any of the above symptoms on your iPhone, follow these steps:
    Update your iPhone to the latest version of iOS.
    Turn airplane mode on and then off again.
    Restart your iPhone.
    Check for a carrier settings update. Go to Settings > General > About. Install any available update.
    Remove the SIM card and make sure that it's a valid SIM that your carrier provided. Also make sure that it's not damaged, worn, or modified. Then reinsert it.
    A SIM tray that comes with one iPhone model won't necessarily work with a different iPhone model. When you insert the correct SIM tray, the SIM tray should be flush with the device.
    If you have another SIM card, insert it. You can use a SIM card from any phone with the same format as your iPhone SIM card. If your iPhone works with that SIM card, contact the carrier that issued your original SIM card.
    Restore the iPhone.
    If you still see the issue, contact Apple support.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • How to get hbo go on apple tv when tv carrier not available

    how toget HBO GO through apple tv when cable carrier does not provide

    Welcome to the Apple Community.
    I'm afraid that isn't possible at this time.

  • BIS not available for Z10 due to carrier request ?

    It has been told me (see this post : Z10 without BIS just a kind of pale iPhone copy) BIS was not available for Z10 due to carrier request, thus I sent my Z10 back to my carrier and turn live my old 9860. One question remains: if carrier ask BBY to stop BIS service for Z10, why or when will they ask them to do the same for ALL bby ? Or the information I've got is just bull$ or one day or an other we all be catch in the trap ...
    can someone confirm if this is true or not ?

    DIDFOR wrote:
    OK but is this a carrier limitation request (and what for)
    It is the way the BlackBerry10 operating system is designed to work.
    DIDFOR wrote:
     Reading post about email replying or sending trouble confirm the decision not using BIS anymore create more trouble than solve
    Sorry, I don't understand that.
    This is a user-to-user community support forum. We are not RIM employees, but volunteers who enjoy assisting other users. RIM personnel rarely comment on queries posted here.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How can i fix my data connection on iPhone 4s when it tells me "not available" under carrier??

    for some reason, my iphone says "not available" under carrier in settings. Anyone know why??

    please tell me what u think can be the problem and the solution

  • Is it possible to show a 'My Activity' web part on a SharePoint site if 'My Sites' is not available?

    Is it possible to show a 'My Activity' web part on a SharePoint site if 'My Sites' is not available?
    For example, say there's a SharePoint installation dedicated to particular (custom) SharePoint site. The users go to the site to carry out their tasks. There's no 'My Site' set up in this installation (and for other reasons I'm told it's not an option).
    Is it possible to show a web part here that shows the user's recent activity? The built-in web part for this fails with the error 'Invalid URI: The URI is empty', and the details of it appear to say it's looking for the user's My Site to find out what to show:
    SPMicrofeedContext.SetMySiteHostForContext failed System.UriFormatException: Invalid URI: The URI is empty.     at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)     at Microsoft.Office.Server.Microfeed.SPMicrofeedContext.SetMySiteHostForContext()
    So, while I'd be happy to write a web part (or app part) to display the information instead of using the default part, I'm not sure SharePoint is even storing the activity in a way I can access.
    Some pages like the following: http://sharepointmystery.com/2012/07/22/activity-feeds-in-sharepoint-2013/ make me think it won't be possible - it says: 'The major change from 2010 is that all the [activity] content is stored in the user’s personal site, not
    in a common database.'
    Are activity feeds dependent on 'My Sites' or is there a way to access the information when 'My Sites' is not present in the deployment? I can't find a definitive answer in Microsoft's documentation.

    To clarify, do you have the User Profile Service (including MySite Host) up and running on this environment? That's subtley different to the full MySite experience which is clearly not applicable...
    Interesting question - thanks for that. Until now I didn't realise there was a difference.
    The User Profile Service is up and running, but no MySite Host is set. (I don't believe MySite will be available anywhere here. I guess that means there's no valid MySite Host for me to use.)
    Many thanks,
        Geoff

  • FaceTime feature is not available on brand new iphone 5 from Dubai, United Arab Emirates (UAE)

    We got a brand new iphone 5 from Dubai, United Arab Emirates (UAE). We are living in Italy and we are trying to setup the FaceTime on brand new iphone 5 but to no avail. Is there a way to enable the FaceTime features?
    Can Apple or the carrier are capable of doing it?

    FaceTime
    http://support.apple.com/kb/ts3367
    "If FaceTime is not available in Settings: Note that FaceTime may not be available on devices purchased or used in certain countries, including Saudi Arabia and the United Arab Emirates."
    Unfortunately that device does not have FaceTime.

  • Satellite Pro A200 - Display Device Hotkey Utility for XP not available

    I have just received 6x A200s (PSAE1E-00Q002EN). These were pre-installed with Vista, however, due to the software platform in place at my institution, I rolled-back the OS to Windows XP.
    All drivers installed fine form the Toshiba support pages and the standard image that we deploy to laptops has been created. However, some functionality is not available under Windows XP.
    Namely the "Fn" key for switching display device (as well as changing brightness/touchpad on-off etc). The ability to switch displays quickly and with a simple User Interface is vital for my users as this is a function they carry out several times a day, with many of them barely computer literate.
    The institute I work for have bought many Toshiba laptops (ranging in model from Satellite Pro 1800s up to A120s and A200s!!!) and up until the A200s this was always included under Windows XP - I hope Toshiba release a fix for this.

    Hi
    The FN keys dont work due to the BIOS compatibility issue with WinXP.
    I presume only the FN+F3 and F4 key combination functions.
    This is a special function which belongs to the Toshiba Power saver and using this keys you can switch to the standby and hibernation mode!
    I dont know if you have tried to update the BIOS but maybe it will enable the Fn key functionality!
    But note; BIOS update is always risky! The wrong BIOS or wrong BIOS update procedure can damage the ROM module where the BIOS is stored!
    Best regards

  • I have restored my iphone but it has been 2days saying that the activation server is not available. please help me.

    i have restored my iphone but it has been 2days saying that the activation server is not available. please help me.

    That is almost always because the phone was hacked to illegally unlock it. Contact the carrier it's locked to and ask about having it legitimately unlocked. If they will not do so, you will not be able to activate that phone.

  • Payment method Cheque is not available in IT9

    Hi Experts,
    I have a query.
    In Infotype bank details, under payment method Cheque option is not available in the dropdown menu.
    But It is defined in payment method. Even though it is not displaying is there any other settings I have to make.
    Please help me to solve this issue.
    Regards,
    R. Arokia Merlin

    HI,
    Payment methods are to be defined in the Financial Accounting configuration menu, where the following steps are to be carried out:
    1. First of all, make all specifications that are required for a country-specific payment method.
    2. Then define per company code the terms under which a payment method can be used.
    All payment methods are displayed in the customer or vendor master record in the screen for selecting the payment method
    Kindly check with FICO consultants.
    I hope this would slove your probs. If yes please close this query and give marks accordingly.

  • HT204266 I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the di

    I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the differences between countries' iTunes offerings? Does one really need an address and a credit card for any country to be able to access that countries iTunes store? Why these restrictions?

    You cannot.
    You cannot use another countrys itunes store.
    You must be physically locates inside the borders of a country to use that countrys itunes store and a credit card issued in that country with a valid billing address in that country.
    The owners of the distribution rights of movies/music/etc differ by country.  These distributors decide who can sell their content in that country.
    Buy from another source if your countrys itunes store does not carry somehting that you want.

  • HTTP POST binding not available in 11g???

    Hi,
    I am trying to call a HTTP service using HTTP POST, passing HTTP params to it. I created a small bpel process in 10.1.3.4, and used the HTTP POST samples, which worked out really well.
    However target platform is 11g. So I just tried to migrate the project and got the following warnings.
    WARNUNG: UPGBPEL-02043: The WSDL used for "HTTPPostParam" has HTTP based binding definition for the porttype specified. SOA Suite 11g does not support this and hence upgrade will not carry this over to the generated composite. Compilation will fail if the composite reference is not setup with binding. After upgrade, setup the reference by specifying a WSDL with SOAP binding. Check SOA Upgrade guide for more information.
    WARNUNG: UPGBPEL-02009: No Binding setup for : "HTTPPostParam". This will cause compilation of the upgraded project to fail. Check SOA Upgrade documentation on manual steps necessary to bind this composite reference. If necessary, upgrade and deploy any dependencies. If planning to retain 1013x nodes in this projects dependency tree, check earlier part of this log for 1013x WSDL URLs that can be used.
    Does this really tell me that HTTP post or get is not available anymore? Or do I miss anything? Or is there a workaround?
    Thanks and regards,
    Thomas
    PS: This is my POSTParam WSDL, which is not yet complete, but working on 10.1.3.4
    <?xml version="1.0" encoding="utf-8"?>
    <definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:tns="http://http.oracle.com/postParam"
    xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
    xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
    targetNamespace="http://http.oracle.com/postParam"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:get="http://xmlns.oracle.com/HttpClientBPELProcess">
    <types>
    <xsd:schema xmlns="http://www.w3.org/2001/XMLSchema">
    <xsd:import schemaLocation="HttpClientBPELProcess.xsd"
    namespace="http://xmlns.oracle.com/HttpClientBPELProcess"/>
    </xsd:schema>
    <!--
    <xsd:schema elementFormDefault="qualified"
    targetNamespace="http://http.oracle.com/postParam">
    <xsd:element name="param" nillable="true" type="xsd:string"/>
    </xsd:schema>
    -->
    </types>
    <message name="HttpPostParamIn">
    <part name="HighwayEndpointId" type="xsd:string"/>
    <part name="HighwayMessageId" type="xsd:string"/>
    <part name="HighwayMessage" type="xsd:string"/>
    <part name="Synchronous" type="xsd:string"/>
    <part name="DISABLE_MESSAGEINPUT_ECHO" type="xsd:string"/>
    </message>
    <message name="HttpPostParamOut">
    <part name="Body" element="get:Request"/>
    </message>
    <portType name="HttpPostParamPortType">
    <operation name="PostData">
    <input message="tns:HttpPostParamIn"/>
    <output message="tns:HttpPostParamOut"/>
    </operation>
    </portType>
    <binding name="HttpPostParamBinding" type="tns:HttpPostParamPortType">
    <http:binding verb="POST"/>
    <operation name="PostData">
    <http:operation location="/highway/http/SubmitMessage"/>
    <input>
    <mime:content type="application/x-www-form-urlencoded"/>
    <!--
    <mime:content type="text" part="param1"/>
    <mime:content type="text" part="param2"/>
    -->
    </input>
    <output>
    <mime:mimeXml part="Body"/>
    </output>
    </operation>
    </binding>
    <service name="PostParamService">
    <port name="HttpPostParamPort" binding="tns:HttpPostParamBinding">
    <http:address location="http://itrax03.wlgore.com:8080"/>
    </port>
    </service>
    <plnk:partnerLinkType name="PostParamService">
    <plnk:role name="PostParamServiceProvider">
    <plnk:portType name="tns:HttpPostParamPortType"/>
    </plnk:role>
    </plnk:partnerLinkType>
    </definitions>

    The sample that heidi posted above is basically the codebase to the http binding we are planning to ship with Patchset 2. It's based on Jax-WS' http binding.
    Let me know if you run into any issues (the source is included - so you can play around :) - no license )

Maybe you are looking for