HT201415 Cellular network connection very very slow.
My ipad3 is very very slow connecting using Vodafone network.
What's wrong and what are the VPN settings supposed to be?
Derrrick5942 wrote:
My ipad3 is very very slow connecting using Vodafone network.
Contact Vodafone and ask them why it is slow.
Similar Messages
-
Network connection very slow, lot of drops
Hello!
On my network, there's an ADSL modem; an AirPort Extreme is connected to it and all my computers are connected to that AirPort Extreme.
Initially, I had set the AirPort Extreme as a bridge and the modem was in PPPoE. However, I had weird troubles with that setup (one computer couldn't reach another one, not even ping) so I made the other way around: the modem is now in bridge mode and the AirPort Extreme handles the PPPoE connection.
Since then (at least, I guess), downloading from the Internet or simply browsing is a nightmare. Connections would start at a varying low rate (always less than 30 KB/s, sometimes 5 KB/s) and always slow down until the connection drops completely. For small files, I can hope to download a 1 MB file in 40 minutes; for larger ones, it's hopeless.
I've tried to rule out the AirPort Extreme, connecting one computer directly to the modem. I reset the modem (since it's in bridge mode and it's beyond the subnet made from the AirPort Extreme, how can I reach it from my network?) and enter my ISP data. When all the lights on the modem are fine, it tells me some tests failed; I can't connect to the Internet that way. It looks like the modem lost its ability to connect as PPPoE when I defined it as a bridge (?).
I then tried to rule out the modem. I connected my computer and the ADSL line to the AirPort Extreme (which still had the PPPoE settings); the AirPort Extreme would not connect or reach a DNS (what's the purpose of having PPPoE settings if it can't connect to the Internet without even passing by a modem in bridge mode?).
In short, I can't rule out either the modem nor the AirPort Extreme, because they both can't connect to the Internet separately (the modem could before I inverted which device is in bridge mode). After all my attempts, the only way to get Internet back is to set the modem again as a bridge and use the AirPort Extreme for the PPPoE, which makes the whole problem of a very slow connection (even unusable) that I'm trying to repair. I'm lost at that point.
Any help would be really welcome!Bob Timmons wrote:
Two possibilities:
1) The modem is not working correctly and should be replaced
If that's the case, then I'm feeling guilty, as it worked before I set it as a bridge.
2) Your log in information has changed due to service provider updates. Contact your provider to verify your account details
It's actually my mother who created that account; I'll ask her further.
my native language isn't English
But, your English is excellent.
Thank you.
Some countries use PPPoA authentication, and not PPPoE. Although they are similar, if your provider really uses PPPoA credentials, then you cannot log on from your Mac or use the AirPort router to provide the log on authorization, since Apple does not support PPPoA.
Well, I tried using PPPoA recently and it wasn't better. Also, the fact that the AirPort is currently the one making the PPPoE authentication seems to definitively indicate it's not PPPoA (thanks to your information that it wouldn't work in that case).
Generally, my opinion would be that things will work better if you use the modem or a modem/router to provide the connection service and run the AirPort in Bridge Mode.....rather than trying to put the modem in Bridge Mode and use the AirPort to provide the connection service.
Yes, I agree. Actually, I had another problem with the previous setup (AirPort as bridge and modem for PPPoE) where, on my LAN with two computers, only one could reach the other one (the connection worked in one direction only); I couldn't even use file sharing, Remote Desktop or even ping (because, even trying from the working sense, the response would often not come back). In this Apple forum, I got the suggestion to exchange which device was in bridge mode and, indeed, now I can communicate from and to all computers. Since I've realised my connection to the Internet is now mostly broken, I should have been satisfied with the previous problem…
I'm hoping to go back to an Internet connection that works, and not get the first issue of computers not being reachable on the LAN. The big trouble here is that all these behaviours I've experienced are weird (am I outside of the logic with my use of the devices?). I'm also noticing that the first problem sounds to have arrived since I replaced my old router by the AirPort Extreme.
If your modem is 4-5 years old, then that might be another reason to consider replacing it. Ask your provider what they would recommend.
Wow, mine is actually way older than that! I don't think we've ever changed it since we had an Internet connection (around 1998). At this time, things were not designed to break too soon, right?
Perhaps it had to break with this duration of use, and it just waited that I change settings to break… Doesn't sound a likely scenario, however.
I'm considering trying with my neighbour's modem (with his connection's settings), with the AirPort in bridge mode. If it works, I'll be almost certain the problem is the modem, I'm right?
Thank you very much for your help so far; things are getting clearer! -
Hi!I was restoring my MacBook pro to its factory setting by erasing the disk and reinstalling OS X lion via internet.but it is failing telling me that my network is very slow while I used the best network in my area.How should I get an OS X lion to my CP? Is it possible to get it from another MacBook pro?Or is it possible to recover the erased OS X Lion without or with external disc?
Thank youHi OGELTHORPE!
Thank you for your advice but I don't know where i can get it and where to get it. Also I don't know also how to use it.
Could you please keep on helping me?
Regards! -
what's wrong with the activation server? i just bought my ipad wifi celllular... and have a 3g cellular network connection... when i press the bottom to activate my ipad it says the activation server cannot be reached. what to do then?
Hey aries35,
I found the following that goes over troubleshooting the same issue for the iPhone. I know you have an iPad, but the steps should still apply:
Perform the following steps:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
via: iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Cheers,
Delgadoh -
Lumia 920 Facebook connection very slow over WiFi ...
Since the Portico update the connection to Facebook both in the People and Me hub as well as in the Facebook app is very slow over WiFi, whilst still good over 4G/LTE (with WiFi off). The connection to the Nokia account also appears to have a similar problem. All other accounts and apps have good speed over both cellular and WiFi connections.
Any ideas anybody?
PS: FYI, a bit more info about the history and context: When I noticed the problem the first time after the update, I tried to solve it by deleting and re-adding my Facebook account on the phone. Unfortunately, that made me lose my Me hub tile, so I decided to do a full reset. That again unfortunately got stuck on the togg wheels, so I restored the phone using Nokia Care Suite with the latest firmware, and restored my accounts, apps and settings from scratch. Everythings seems to work fine now, except the above mentioned Facebook and Nokia account connectivity problem.Did you somehow solve this problem?
I have the same issue here with my Lumia 920.
However I have already found out that it only applies to my home Wifi. All other Wifi networks i was connecting to did work flawlesly.
I need to note that all other devices on my home network are using facebook without a glitch. Only Lumia has some problems with it. -
Hp 8600 All in one printer problem with scanning through wired network its very slow!
Hi
i have problem with scanning thru network which takes almost more than 2minutes very slow compared to scanning when printer connected locally with USB. i need some solution to fix this issue. Plz advise me what needs to be done prior to scanning?Welcome to the community @Larrypat
I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
Also let me know which model from the C7200 series you have:
HP Photosmart C7250 All-in-One Printer
HP Photosmart C7280 All-in-One Printer
HP Photosmart C7288 All-in-One Printer
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
Let me know how it goes and the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Slow performance of fetching BLOB data over network is very slow
Dear Experts,
We are deploying a GIS application which handles with BLOB datatypes. Database Server is in RHEL and in 11gR2. The application is using asp.net 3.5 and using ODP.NET to connect with Oracle. But here is a performance chart which shows that performance is very slow when application and database server lie on different subnetwork.
Case Login Time
Same Server(Both in 192.168.9.23) 20-25 sec
Same Subnet (DB:192.168.9.25) (App: 192.168.9.23) 60-80 sec
Different Subnet (DB:192.168.11.153) (App:192.168.9.23) More then 5 minutes
So what is the reason behind this and how can I improve performance if I want to keep application and database in diff machine?
Thanks in advance.Also, look into the various lob settings in ODP.NET.
I believe that by default in ODP.NET the LOB will be fetched in separate roundtrips but you can change this my messing with certain properties or using certain methods - apologies, a bit imprecise.
If you have a network issue then doing more roundtrips than you need to is just going to exacerbate the situation.
Trace the session - if it's networking or roundtrips you should see symptoms of it in a 10046 trace. -
Ethernet connection very slow.FIOS.. Help
All of a sudden, when I turned my mac on today and booted up Firefox, my connection was incredibly slow(almost taking 1-2 minutes to load a normal page). Some pages aren't even loading. It seems very out of the ordinary
-I figured maybe it was just Firefox, so I turned on Safari...nothing
-I figured it was disk space, so I freed up 18 gigs of 80...nothing
-I figured it was the ethernet cable, so i ran a network diagnostic check...it said My internet connection was fine
-I figured maybe I had a bad wire or something, so I plugged in in another room where another Computer regularly plugs in...still slow.
-The other computer currently plugged into the router is still going strong.
-I tried resetting it, by turning the router off and letting it set....nothing
-I'm not sure if it matters but the cable I use, is used for both my xbox360 and my mac...and it works fine with xbox live. So Im assuming the connection is good.
-I ran Clam, and I can't find any trojans(or any files to my knowledge of being corrupt)
Can anyone help me out?I took mine in yesterday and payed $80 for them to look at it because I don't have warranty anymore, they told me that it may be a router issue. I took the computer to my girlfriends house where she has a Time Capsule and it worked amazing. So be careful taking your computer to the shop. They may not be able to help you that much.
-
Internet Connection very slow WRT160N v3
I had my an IT person install a brand new WRT160N router. I also installed a new HP wireless printer/scanner/fax/printer. I am now noticing that the internet connection is very slow. Taking about 4 minutes to download any link or site I visit. I have talked to charter today and they are telling me my signal strength is great - I have highest speed they offer (20). What am I not doing right? Do i need to check this router or a connection? - Allison
Physical connection should be like from modem to the router on internet port and from computer to the routrer on ethernet port 1.
Try to readjust the wireless settings on your router....
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect... -
IMac connection very slow via airport
I hope some of you on the forum can help me as I'm rather puzzled. My internet has always been running at a good speed ,20mbs real time 12-17mbs. Before christmas I experienced a dip in the speed. I thought it was the ISP and contacted them. It turn out that there was a fault in the area. That should naw have been fixed and running speed tests on my macbook pro's proved that correct. I'm now getting the full 20mbs. How ever the iMac is painstakingly slow on the network and when going on the internet. speedtest.net gives me a >1mbs on downloads and > .5mbs. My 17" macbook pro which is placed next to the iMac in the office upstairs is running full tilt 20mbs download and <2mbs upload. This is very frustrating as I can't understand why the difference can be so big. I've restarted router, modem, iMac. Reinstall of Snow Leopard (Clean) repaired permissions, HDD. Have i got something wrong with the airport, spyware/virus (don't see that being the case) If any one of you guys/girls has any idea's solution please let me know.
TomI think I'm having a similar problem. I have a late 2006 24-iMac C2D 2.4 and it is has very slow internet access. I understand that there is so many variables but I have another iMac (same model) and a late 2009 Macbook Pro and they have no problems. I've had the internet connection tested and it is working fine.
I can't figure out what the problem is.
Likewise, I've done the same things: reset airport, modem, moved computer, and reinstalled OSX.
I have no antivirus software.
Message was edited by: Pbtaco
Message was edited by: Pbtaco -
TimeCapsule 2.4ghz connection VERY slow
For the past several days, any connection to the 2.4Ghz radio on my TC is very slow. Speedtest.net shows .29Mbps download and .34Mbps upload (yes, note the decimal place!). If I switch over to the 5Ghz radio, my speeds increase to 16.03Mbps download and 4.19Mbps upload. Also, when connected to the 5Ghz radio, my laptop is showing a full 4 bars of strength, whereas when connect to 2.4 radio, I am only getting 1-2 bars from the same location.
The TC is connected to my Comcast cable modem - wired connections through the TC are getting 30+Mbps downloads.
I have tried restarting TC, restarting the cable modem, rebooting client machines...
Ideas? is my 2.4Ghz radio dying?Chances are, your router is just fine and you are picking up some interference on the overcrowded 2.4 GHz band from a cordless phone, other neraby wireless network, or a wireless camera/security system.
I used to have intermittent slow downs and drop outs on my old 2.4 GHz router and never could figure out why. One day at my desk, by accident I noticed my neighbor coming out of his front door talking on his cordless phone wihen my wireless suddenly slowed. When he got to his mailbox on the street, the wireless was down to a crawl.
So, the source of the interference may not necessarily be in your home, although if you have any cordless phones, that would be the first thing to investigate. For more info on the epidemic problem of wireless interference, you might want to look over this document:
http://support.apple.com/kb/HT1365
Or, this thread:
https://discussions.apple.com/thread/2262411?threadID=2262411&tstart=0 -
AirDisk vs. Networked drive very slow
hi everyone,
have been searching and browsing the forum around this topic but couldn't find a real answer or fix to my "problem" yet.
i'm just really curious about why an external drive hooked up to the airport extreme is about 10 times slower than a harddrive shared from another mac using wifi through the same base station.
setup is as follows:
LaCie BigDisk Extreme shared through a G4 Cube (love) > Ethernet Hub > Airport Extreme (Gigabit Ethernet) versus WD MyBook Premium II > USB 2.0 > Airport Extreme (Gigabit Ethernet)
i'm accessing both from a macbook (black one, latest model) and a macbook pro (latest model) - and transferring a file from the disk hooked up to the cube is about 10 times faster than the same file (or any other comparable in size) copied from the drive hooked up to the airport extreme basestation.
it does not make ANY difference at all if i set the basestation to any of the 4 options you find in the wireless radio mode options (802.11n 2.4/5GHz - b/g compatible), so i'm really curious if this is just a firmware issue (7.2.1) that will get fixed further down the road or if i'm doing something really stupid, or... if this is a half-baked feature never to be living up to the promise made?
anyone? any ideas?
thanks,
norbertA Western Digital My Book Live. I've spent two days trading emails with a very nice person from the company who has asked me to try various fixes and nothing has worked. They are perplexed as to a solution and I'm close to pulling the plug on this endeavor.
I have an imac connected to a switch with the my book live and the imac connected to the switch. Switch connected to the wall ethernet jack that connects to the time capsule/airport device. The time capsule is connected to the verizon fios router/modem. I have the verizon wireless signal turned off. Everything else in the house has connected and has been working fine for a year. This network hard drive takes forever to access and is very slow. -
Since I have installed iOS7 on my iPhone 4s - 16G, my 4s connects very slowly to my home Wi-Fi network. Sometimes it even doesn't connects at all. Which result in a higher mobile data usage (and thus higher bill at the end of the month).
Can this error be solved in iOS 7.0.4?Hi masterwil,
The article below may be able to help you troubleshoot your Wi-Fi issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
I hope this information helps ....
Have a great day!
- Judy -
Adobe Photoshop CC2014 internet connection very slow
Hi,
I'm developing an Adobe Photoshop HTML5 (website) extension. This is working fine in Photoshop CC, but is very slow in CC2014.
Today I've installed an update for Photoshop CC2014 and I was presented with an 'introduction' screen, loaded from the web.
This had the same slowness, indicating my extension is not at fault.
The regular functionality of Photoshop has a normal speed, and I'm working on a recent computer with Win 7 64bit.
I've recorded a video showing how slow it really is (and proof that my internet connection has sufficient speed)
http://videobam.com/gmNun
How can I solve this?
Thanks!
SamJust checked, same problem for other users
This is what's in help > system info:
Adobe Photoshop Version: 2014.2.0 20140926.r.236 2014/09/26:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2693 MHz
Built-in memory: 8097 MB
Free memory: 3404 MB
Memory available to Photoshop: 7084 MB
Memory used by Photoshop: 70 %
3D Multitone Printing: Disabled.
Windows 2x UI: Disabled.
Highbeam: Enabled.
Image tile size: 128K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Display: 2
Display Bounds: top=180, left=1920, bottom=1080, right=3520
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=2112
glgpu[0].GLName="Intel(R) HD Graphics 4600"
glgpu[0].GLVendor="Intel"
glgpu[0].GLVendorID=32902
glgpu[0].GLDriverVersion="9.18.10.3204"
glgpu[0].GLRectTextureSize=8192
glgpu[0].GLRenderer="Intel(R) HD Graphics 4600"
glgpu[0].GLRendererID=1046
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,i gd10iumd32"
glgpu[0].GLDriverDate="20130603000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Build 9.18.10.3204"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447 ]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[80]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[64]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
clgpu[0].CLPlatformVersion="1.2 AMD-APP (1124.2)"
clgpu[0].CLDeviceVersion="1.2 AMD-APP (1124.2)"
clgpu[0].CLMemoryMB=2048
clgpu[0].CLName="Hainan"
clgpu[0].CLVendor="Advanced Micro Devices, Inc."
clgpu[0].CLVendorID=4098
clgpu[0].CLDriverVersion="1124.2 (VM)"
clgpu[0].CUDASupported=0
clgpu[0].CLBandwidth=2.56187e+010
clgpu[0].CLCompute=285.525
License Type: Subscription
Serial number: 90970762941485624948
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\Sam\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 153,9G, 88,5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/08/12-23:42:09 79.557478 79.557478
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/09/07-21:07:38 79.558079 79.558079
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 5.2.4
AdobePDFL.dll PDFL 2014/08/18-15:13:12 79.512424 79.512424
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/08/20-09:53:02 79.156797 79.156797
AdobeXMPFiles.dll Adobe XMP Files 2014/08/20-09:53:02 79.156797 79.156797
AdobeXMPScript.dll Adobe XMP Script 2014/08/20-09:53:02 79.156797 79.156797
adobe_caps.dll Adobe CAPS 8,0,0,13
AGM.dll AGM 2014/08/12-23:42:09 79.557478 79.557478
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib.dll AMTLib (64 Bit) 8.0.0.122212002 BuildVersion: 8.0; BuildDate: Wed Jul 30 2014 15:59:34) 1.000000
ARE.dll ARE 2014/08/12-23:42:09 79.557478 79.557478
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/08/12-23:42:09 79.557478 79.557478
BIBUtils.dll BIBUtils 2014/08/12-23:42:09 79.557478 79.557478
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/08/12-23:42:09 79.557478 79.557478
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
igestep30.dll IGES Reader 9.3.0.113
imslib.dll IMSLib DLL 7.0.0.154
JP2KLib.dll JP2KLib 2014/06/28-00:28:27 79.254012 79.254012
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/08/18-23:43:19 79.557676 79.557676
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.2
Plugin.dll Adobe Photoshop CC 2014 15.2
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.2.0.46
PSArt.dll Adobe Photoshop CC 2014 15.2
PSViews.dll Adobe Photoshop CC 2014 15.2
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 8.0.0.14
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 15.2 (2014.2.0 x001)
Accented Edges 15.2
Adaptive Wide Angle 15.2
Angled Strokes 15.2
Average 15.2 (2014.2.0 x001)
Bas Relief 15.2
BMP 15.2
Camera Raw 8.6
Camera Raw Filter 8.6
Chalk & Charcoal 15.2
Charcoal 15.2
Chrome 15.2
Cineon 15.2 (2014.2.0 x001)
Clouds 15.2 (2014.2.0 x001)
Collada 15.2 (2014.2.0 x001)
Color Halftone 15.2
Colored Pencil 15.2
CompuServe GIF 15.2
Conté Crayon 15.2
Craquelure 15.2
Crop and Straighten Photos 15.2 (2014.2.0 x001)
Crop and Straighten Photos Filter 15.2
Crosshatch 15.2
Crystallize 15.2
Cutout 15.2
Dark Strokes 15.2
De-Interlace 15.2
Dicom 15.2
Difference Clouds 15.2 (2014.2.0 x001)
Diffuse Glow 15.2
Displace 15.2
Dry Brush 15.2
Eazel Acquire 15.2 (2014.2.0 x001)
Embed Watermark 4.0
Entropy 15.2 (2014.2.0 x001)
Export Color Lookup Tables NO VERSION
Extrude 15.2
FastCore Routines 15.2 (2014.2.0 x001)
Fibers 15.2
Film Grain 15.2
Filter Gallery 15.2
Flash 3D 15.2 (2014.2.0 x001)
Fresco 15.2
Glass 15.2
Glowing Edges 15.2
Google Earth 4 15.2 (2014.2.0 x001)
Grain 15.2
Graphic Pen 15.2
Halftone Pattern 15.2
HDRMergeUI 15.2
HSB/HSL 15.2
IFF Format 15.2
IGES 15.2 (2014.2.0 x001)
Ink Outlines 15.2
JPEG 2000 15.2
Kurtosis 15.2 (2014.2.0 x001)
Lens Blur 15.2
Lens Correction 15.2
Lens Flare 15.2
Liquify 15.2
Matlab Operation 15.2 (2014.2.0 x001)
Maximum 15.2 (2014.2.0 x001)
Mean 15.2 (2014.2.0 x001)
Measurement Core 15.2 (2014.2.0 x001)
Median 15.2 (2014.2.0 x001)
Mezzotint 15.2
Minimum 15.2 (2014.2.0 x001)
MMXCore Routines 15.2 (2014.2.0 x001)
Mosaic Tiles 15.2
Multiprocessor Support 15.2 (2014.2.0 x001)
Neon Glow 15.2
Note Paper 15.2
NTSC Colors 15.2 (2014.2.0 x001)
Ocean Ripple 15.2
OpenEXR 15.2
Paint Daubs 15.2
Palette Knife 15.2
Patchwork 15.2
Paths to Illustrator 15.2
PCX 15.2 (2014.2.0 x001)
Photocopy 15.2
Photoshop 3D Engine 15.2 (2014.2.0 x001)
Photoshop Touch 14.0
Picture Package Filter 15.2 (2014.2.0 x001)
Pinch 15.2
Pixar 15.2 (2014.2.0 x001)
Plaster 15.2
Plastic Wrap 15.2
PLY 15.2 (2014.2.0 x001)
PNG 15.2
Pointillize 15.2
Polar Coordinates 15.2
Portable Bit Map 15.2 (2014.2.0 x001)
Poster Edges 15.2
PRC 15.2 (2014.2.0 x001)
Radial Blur 15.2
Radiance 15.2 (2014.2.0 x001)
Range 15.2 (2014.2.0 x001)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.2
Ripple 15.2
Rough Pastels 15.2
Save for Web 15.2
ScriptingSupport 15.2
Shake Reduction 15.2
Shear 15.2
Skewness 15.2 (2014.2.0 x001)
Smart Blur 15.2
Smudge Stick 15.2
Solarize 15.2 (2014.2.0 x001)
Spatter 15.2
Spherize 15.2
Sponge 15.2
Sprayed Strokes 15.2
Stained Glass 15.2
Stamp 15.2
Standard Deviation 15.2 (2014.2.0 x001)
STL 15.2 (2014.2.0 x001)
Sumi-e 15.2
Summation 15.2 (2014.2.0 x001)
Targa 15.2
Texturizer 15.2
Tiles 15.2
Torn Edges 15.2
Twirl 15.2
U3D 15.2 (2014.2.0 x001)
Underpainting 15.2
Vanishing Point 15.2
Variance 15.2 (2014.2.0 x001)
Virtual Reality Modeling Language | VRML 15.2 (2014.2.0 x001)
Water Paper 15.2
Watercolor 15.2
Wave 15.2
Wavefront|OBJ 15.2 (2014.2.0 x001)
WIA Support 15.2 (2014.2.0 x001)
Wind 15.2
Wireless Bitmap 15.2 (2014.2.0 x001)
ZigZag 15.2
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash: NONE
Installed TWAIN devices: NONE -
[SOLVED] Network speed very slow, no apparent reason
Hello, recently I switched from Windows 7 RC1 to Arch on my home machine (I have used Gentoo, Ubuntu, and Fedora 10 on the same machine in the past), and for some reason network speed is very slow.
I have Verizon's 20mbit/5mbit package, and I have always gotten that speed.
Using speedtest.net and 100mb.test from cachefly on multiple computers I have come to the conclusion that it is infact my Arch install that is causing the problem:
- All other machines on my network are getting 20/5 (both wired and wireless)
- I ran a speedtest from 2 other machines using the ethernet cable that this PC is on. Again, full 20/5.
- scp transfer of 100mb.test from this PC -> other Arch box: ~2.8MB/s.
- scp transfer of 100mb.test from other Arch box -> this PC: ~2.8MB/s.
- scp transfer of 100mb.test from this PC -> UK VPS (100mbit line): ~539KB/s
- scp transfer of 100mb.test from UK VPS -> this PC: ~76KB/s
- scp transfer of 100mb.test from this PC -> Chicago Server (dual gbit lines): ~563KB/s
- scp transfer of 100mb.test from Chicago Server -> this PC: ~91KB/s
speedtest.net result:
Upload speed seems to be unaffected.
I have tried disabling TCP window scaling, and appending my hostname to /etc/hosts.
What is weird though is that the other Arch box has an identical network config, I don't see any reason why it shouldn't work.
My NIC is an integrated Realtek something, I can get the exact model if needed.
Last edited by whipsch (2009-06-05 18:29:21)Hi, whipsch
Can you try ethtool to see if your ethernet card is actually negociating and using a 100Mb full duplex link on your LAN ? If not you can try to force the link parameter with ethtool. Also maybe the driver of your NIc has options related to link negociation.
Hope this helps,
JF
Maybe you are looking for
-
OIM 9.1.0.2 - Report issue
Hi Gurus, IHAC who have reported that after running reconciliation archiving operation one of their reports stopped to properly work. The report is the Rogue Account by Resource. I guess the records for generating that report are in the RCX table. Be
-
I can no longer add songs to my Ipod touch
These are the things I have done: I cleared space, as mine doesn't have a lot of it. I updated both itunes and Ipod software I have restarted both my Mac and my Ipod. I have checked to ensure that "manually add songs" or whatever it says is enabled T
-
Will pages automatically reformat to correct size when using Folio Builder or do I have to make pages iPad format, for example, in InDesign document set up from the start?
-
Hi Dear Gurus, I am facing the following problem: There is a production order for a material (say X, matrl type FERT) of order qty 21EA. First we did GR of qty 9EA. but when we are going to do GR for the rest of the qty i.e.12EA it is not happening s
-
After installing the latest update - automatic updates and after rebooting without any error, the finder application can not open any folder or device anymore. Seems the appication crashes after which the following pop-up appears : Anybody any idea ?