HT201436 i can hear when some one call me but he cant hear my voice

I CAN HEAR WHEN SOME ONE CALL ME BUT HE CAN NOT HEAR MY VOICE HELP ME PLZ

Try this with the screen unlocked, press up or down on the volume controls on the side. Does it say headphones? If yes, then try cleaning the headphone port with compressed air.

Similar Messages

  • HT4623 i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

    i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

    You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+

  • When some one calls the caller ID shows the name twice as we'll as when I receive texts it shows up twice.  I'm sure it's a simple setting issue. Any thoughts ???

    When some one calls the caller ID shows the name twice as we'll as when I receive texts it shows up twice.  I'm sure it's a simple setting issue. Any thoughts ???

    have the same issue on my 9630 after upgrading to 624 version. It momentarily shows the previously callers information before showing the new caller's info.

  • How to make the contact picture should appear on the upper right corner with thumb picture when some one calling instead showing the entire screen

    How to make the contact picture should appear on the upper right corner with thumb picture when some one calling instead showing the entire screen

    See deggie's response in this post... https://discussions.apple.com/message/8531821#8531821

  • Recently got a iphone5s  can hear someone call me but they cant hear me

    Hello i recently got a new phone iphone5s and i can hear someone call me perfectly fine but they cant hear me and also the phone wont recognize the headphones. it would treat it like the headphones arnt in and also i tried to make a video and cant hear myself speak

    Hello Sylviaxox,
    It seems you are experiencing an issue with the microphone of your iPhone. That does sound troublesome. The following article provides troubleshooting guidance which may help you find a solution:
    If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
    Fix common issues
    Follow these steps, testing after each with Voice Memos.
    Unplug anything plugged into the headset jack.
    If you're on a call and holding your phone next to your ear, speak into the microphone and make sure you don't block it with your fingers or shoulder.
    If you're using a screen protector or case that covers the microphone, remove it. Clear any debris from the microphones.
    Restart your device.
    Update to the latest version of iOS.
    If you've tried these steps and people still can't hear you well on calls, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • Cant get a ring tone when some one calls or a tone for mymessages

    cant get a ring tone when people call same with my messages and i cant hear callers unless i pt it on speaker

    I just reread your message and at first I thought you wanted to get ringtones. Now I think you meant you don't hear sounds unless you are on speakerphone. I would try a Restart to seeif it learns your issue. To Restart Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.

  • TS1630 i can hear other people who is calling me but he cant hear me?

    i cant hear other person who is calling me but he can listen me.

    http://www.ifixit.com/Answers/View/59246/I+can't+hear+my+phone+calls+unless+I+pu t+it+on+speaker.
    DO this and thank me later

  • TS4268 Why I am not getting the ring when some one calls me on FaceTime ?

    I am able to use FaceTime but if I am in sleep mode, I do not here the ring of the calling party and hence I can not use FaceTime when I am really required to discuss any important matter.
    Why it is so ? What I am missing out ?

    Please explain more about the relation to ABAP development.
    Thomas

  • TS3274 no sound when some one calls on skype

    dear apple:
                      I recently bought an ipad 3 with sim, i am havin a slight problem with the sound as i have installed skype in my ipad and i cannot hear any ringing tone when someboday calls me. could you please show me solution to this
    waitin for your responce.
    syed Adnan Shahab

    This is not Apple. This is a user to user discussion.
    1. If Side Switch is set to Mute, check to make sure it's not muted
    http://i1224.photobucket.com/albums/ee374/Diavonex/1237fb40.jpg
    2. Check the Volume buttons
    http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg
    3. Double-click the Home button; swipe the Task Bar to the right. Check the Mute and Volume settings.
    http://i1224.photobucket.com/albums/ee374/Diavonex/acd1c239.jpg

  • HT201401 when some call me my phone don't sound just vibrate when some one call

    **** me please

    It's VERY unlikely, but you may have some videos on your iPod, and your library is making them out to be songs, but your iPod seperates them.
    If that isn't it, then those songs might be corrupted. If that isn't the case, then I'm not sure what to tell you. Have you tried updating iTunes, or restoring your iPod?

  • I can see the signal on the meters, but I cant hear it on the monitors

    I know this is a PEBCAK issue, but here goes.  Running LPX on OS 10.8.4 using a Line6 TonePort UX1 for a bass guitar interface.  All was peachy on tuesday at my One-To-One session.  Since then, I've been experimenting with creating new projects.
    When I open the project we created on Tuesday, all is good.  I'm adding comps, playing with the amp designer and playing along to a song from my iTunes library.  Each of my new projects are just as the title says. I've created a new project as guitar or bass with "input monitoring" and "record enable."  I can hear loops through the monitors, but not my own instrument.   I must be missing a step, but for the last three days, I'm flabberghasted as to what step that is.  Any Ideas from the community?

    This is a SS of the project from Tuesday which seems to work just fine.
    This is a project I created a few minutes ago.  Meters and tuner show just fine.  No sound from input monitoring or recording.

  • My iphone 4 was working good until IOS6 update, now I can't hear anything, my ear phone donot response ...Speaker are ok..if some one call me...they can hear me ...but I can't hear them.....please desperately need help...plz suggest...all reset is done...

    My iphone 4 was working good until IOS6 update, now I can't hear anything, my ear phone donot response ...Speaker are ok..if some one call me...they can hear me ...but I can't hear them.....please desperately need help...plz suggest...all reset is done...except restore ...

    Anyone? . . . :S

  • I have an iphone 4s, when i make a call i can hear them but they cant hear me so i have to put it on loud speaker

    i have an iphone 4s, when i make a call i can hear them but they cant hear me so i have to put it on loud speaker

    Hi gallimore1998,
    It sounds like you may be having an issue with one of the microphones on your iPhone. Here is an article that will help you address this:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • Sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.

    Hey shahbazfromgbr,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    2. Make sure the Ring/Silent switch is not switched to silent.
    3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
    9. Restart the iPhone.
    10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
    11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Thanks,
    Matt M.

  • HT201401 Can't hear when making a call

    I can't seem to be able to hear when making a call or receiving one

    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630

Maybe you are looking for

  • Use of cookies in fixed-layout EPUBs

    I am creating a fixed-layout picture ebook in EPUB2 format to be published on the iBookstore. In order to start some CSS3 animations at the same time on both pages of a page spread, I'd like to use a mechanism to synchronize the start time for the an

  • My timeline is stop when browser open a new tab

    any one know how to fix that every time i switch to a new tab in  browser (laptop or device) my timeline is stop when i back to the page ... then continue .... why ? and how to fix that ? thanks

  • Re-initiate Sync with records in CEQ$Tables

    Hi, I have some records in CEQ$xxxxxxx tables. Is there is any mechanism that i can push those to the syncronizing process (putting them into some where or changing any status) Thanks

  • WD ABAP Iviews under Related Activities

    Hi, I am trying to include standard WD ABAP Iview under ESS in MSS under Team Workset. However it is not working the same way as WD Java Iviews does. Instaed of picking selected Employee's page, it is displaying Manager's page. I have also maintained

  • Why is it ln and not nl?

    Heh, it isn't a problem, but I'm curious. println() adds a new line att the end, but ln stands for line (I belive). why not nl for newline, since it does add a new line? printline and print is the same (namewise..). Or does ln stand for something els