HT201436 My phone will not come on just the apple faintly but before this I could not reach anyone. It would ring the person I called but they could not hear me What is the matter?
My I phone 5 is not coming on. If I try to start it the apple comes on faintly and then it goes out. Earlier todaye I called a cell and it worked fine.I tried to call my home phone and it would not ring yet my Husband tried to answer but I could not hear him. When I dial out it does not ring on my end and when they try to answer answer I can hear them but they can not hear me. Took it to the Bell dealer in the Mall at Kindersley Sask. and they put a new card in and no different.At that time it was still coming on and now it will not.have not had this phone very long and I am not impressed. The people I bought it from phoned and they told him to reset it but now it will not come on and the battery is not dead. Can I take it back to the dealer
I bought it from and have him replace it? I do not want to have to wait 2 weeks for a phone.
"racb" and "Allan Jones " sorry I dindn´t noticed that I was in original Macbook Pro... my mistake.
thank for noticing it
anyway maybe it could be some similar program. use the second DVD from OSX restart and keep pressing D until it makes de "Dooong" sound make a hardware test
Message was edited by: vcosta@pt
Similar Messages
-
Uploaded iphone 4s to ios7, now my phone will not activate. What do i need to do to get it back?
I just recently updated to iOS7, then this evening I TRIED to upload the next version. Now my phone will not activate with my Verizon account. The phone has no service in an area where I have 5 bars on my Wi-Fi. But yet my phone will not activate.
what message does it display?waiting for activation?
-
HT201436 MY PHONE WILL NOT WORK SINCE UPDATE AND APPLE DONT WANT TO KNOW FRUSTRATED - YES
oh my days!!! why wont my phone work, no help from apple unless i pay - i give them enough money as it is. takes the mick. just want my phone to work
If you're beyond the 90-day free telephone support period and don't have AppleCare on the iPhone, then yes, Apple will charge you for assistance unless the problems turns out to be one that would be covered under the warranty. But if you have an Apple Store in your area, you can make an appointment at the Genius Bar there and they will help you at no charge.
For assistance here, without any information other than "won't work" it's difficult to offer much in the way of useful suggestions. All I can suggest is that you try the usual steps: restart, reset, restore.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414
If you try restoring from a backup and that doesn't fix the problem, try restoring to factory settings and, if the problem goes away, then synching your apps. You'll lose the app data and settings, but if the problem is due to a corrupt cache or settings file, that should cure it.
If none of that helps, your device may have developed a hardware fault and will need to be take or sent to Apple.
Regards. -
I took my iPhone to AT&T after I tried to update to iOS 6 and the phone said I needed to insert the original sim card which was what was in the device. AT&T said to take it to apple because it had to be a software issue. I get to the apple store and they tell me because I replaced my phone because of the defective shutter malfunction the "genius" entered in the wrong serial number by one digit causing the phone to turn into a UK phone and they could not fix it unless I have some sort of reciept or email saying it came from Apple. Mind you this is a year later with a move from TX to HI as well! So what am I able to do?? be out of a phone because they messed up?? They told me I could outright buy a new phone which I am NOT going to do because this phone worked before.
I cant find any reciept in my email or in my husbands email. I am going to attempt to call and speak to someone who can help me because this was not my fault except trying to be normal and update my phone!
-
When I try to install the new 5.0 software, I get fault code 14.....then my phone no longer works. What do I do????
Covered here:
http://support.apple.com/kb/TS3694 -
Why did my charger from Verizon already go bad..bought another one and it went bad..now the phone will not charge..what a disappointment and a hassle..should have stuck with Apple..only had the phone 2 months. Hope they will exchange it!!!!!!!!!!!!
This is either a Phone issue or an Electrical issue in your home.! when charging Do you always use the same electrical outlet? or did you try others..
You will know or should know if there are any issues with your other Electronics.. that you Plug into it..
If it is the s5 which it sounds like it could be then the Local Verizon store at there Discretion will determined if replacement is needed you have a 1 year Manufactures Warranty that covers for things like what your Describing I would take it too your local store see if they'll get you a Replacement or you may have to go through Samsung..
But I would Try another OUTLET just to see if your phone charges with it.. And Good Luck b33 -
HT201274 tried to erase all content and phone will not restart
Itried to erase all content and now the phone will not restart. What do I do?
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?
Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
http://rawtherapee.com/ -
Good Morning,
I just did a software update on my phone (finally) last night and now my phone will not come on. It keeps showing the charger pointing up to a blue circle with iTunes inside and will not go any further. Can ANYONE help me please???The phone is in restore mode and the picture is telling you what to do. Connect the phone, by cable, to iTunes in the computer you normally use for syncing, and retore the phone.
-
I DONT KNOW WHAT TO DO!!!!!!!!! my ipohone die and i placed it on the charger to charge and my screen will not come up its black. i tried to restore it but my phone will not come on what do i do
i did the apple sign came on as white and my screen had white around the edges i retored it and afterwards my phone is vibrating nonstop on the USB cored while still pluged to my pc
-
My phone will not come on it says hook to itunes... What do i need to do?
what do I need to do.? My phone will not come on it says hook up to itunes
Sounds like you need to restore the iPhone > iTunes: Restoring iOS software
-
My phone will not turn on just has the apple logo on it what can i do ?
My phone will not turn off or on just has the apple logo on it
Click here and follow the instructions.
(126112) -
My new iPhone randomly just stopped working and will not turn on what should i do?
My new iPhone randomly just stopped working and will not turn on what should i do?
thanks paul, i just had a similar problem, had to hold it for 30 seconds and the apple sign has come up, my phone was vibrating for over two hours completly unresponsive, now my lap top seems to be comunicating too, oh hello, its back on again...thank you!!!!
-
Hello, my name is brad and I recently had a voicemail app that I was using and now i got rid of it. But now my voicemail for the phone will not work. I tried to reset the network settings and nothing happened. I was wondering if you could help me out?
When you set up a voicemail redirection, usually you have to remove that redirection from the account that redirected it. Like Google Voice, if you activate Google Voice to receive your voicemail, you will have to log into voice.google.com to turn it off. If you contact your carrier, they can tell you exactly what program has taken over your voicemail functionality just in case you are stuck, but if you know the name of that App, I'm sure you will be able to figure it out. Hope this helps you out.
-
I just did a software update that was apparently for iPhoto. When I try to open iPhoto it stops at "step 5" and will not go further. what do I do?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD
Maybe you are looking for
-
Motion not exporting video, just a black screen
I am creating some scrolling text in Motion and when I export the file I am using the same setting I always have. It is a quicktime movie and I am using the current project and canvas settings. I haven't changed anything but after a few times of expo
-
Zero pad a number in BPEL Expression
Is it possible to zero pad a number in a BPEL expression? I have a number that needs to be 6 digits wide(080000) and sometimes comes in with only 5(80000). I was hoping there was a function to do this but I couldn't find one. Thanks, Tom Henrickse
-
Environment Variables of Application Server
Hi, I would like to know whether we have any option to get the environment variables of Application server. Just like how we can get the environment variables of Presentation server using the Method ENVIRONMENT_GET_VARIABLE of class CL_GUI_FRONTEND_S
-
Help with WBS status management
Hi, I am trying to create a new user status for a WBS in OKO2 which will forbid material postings through requisitions and orders and also forbid sales orders to be created. These are standard business transactions and I can see are easily available
-
Ipad 2 3G stuck on "Connect to iTunes screen"
Yesterday I updated my iPad 2 3G to 4.3.3 from 4.3.2. iTunes gave me a error (9) and my iPad is now stuck on the "Connect to iTunes screen". I tried it on multiple pc's everywhere i get error (9). Also tried multiple cables which just does the same.