HT201441 my blocked id open help me plz
my blocked id open help me plz plz plz
Have a look at this resource and contact your network provider: http://www.nokia.com/us-en/support/faq/?action=singleTopic&topic=FA93163
Happy to have helped forum in a small way with a Support Ratio = 37.0
Similar Messages
-
My User session doesn't open, help me plz
This morning when I open it, I want enter in my user session so I enter my password and i'm wait.. but after 5 mins my session doesn't open and the loading bar is blocked on 1/3 of it. I search a solution since 11am and I doesn't find a solution for my problem. I make a demand at apple to call me tomorrow morning but I'm desperate with this problem. Who can help me with? I don't know why this occurrence appeared because yesterday when I close it, all was ok. The only thing which was new on my Mac when I close it its my MacKeeper Premium. I bought a licence of 24 months. I make a anylise before close and nothing is detected.
I test Reinstal OS X but they say than my Disk is blocked with a password, when a enter my password they says is doesnt good password but i know that is good because I enter the same passwords every where when a configure my Macbook Pro.
Im not sur if I enter good operating system and I don't know how check that because I dont have a acces on my finder.
I'm a beginner with Mac systemYou need to create a JSP report from JDev's new object gallery from 'File -> new... -> Reports Objects', so that the project settings can be prepared to run JSP report.
If you want to run JSP report on a standalone Reports server, put 'server=<server_name>' in 'parameters' attribute of <rw:report> JSP tag.
You can also use rwservlet's in-process Reports server, by not specifying 'server=...' in 'parameters' attribute. No standalone Reports server is needed. Make sure JVM is set to'hotspot' in JDev's project settings -> runner.
When running JSP in JDev, it uses JDev's embedded oc4j web server.
Regards, -
ICal blocks upon opening, Help!!!
On my IMac I'm running O/S 10.6.2, Safari 4.0.4. ICal was configured to open upon boot-up. Recently, ICal has been opening and immediately the multi-colored little spinning disc replaces the mouse pointer and I cannot proceed with any type of action such as, open an event, open the file or help menu, nothing. If I pull up Finder for example, my mouse pointer returns and it along with all other programs function normally. ICal is functioning too, in the sense that the month, day and year are current, but I cannot move within the application due to the little disc. I have reviewed the forum content and the Apple site help and tried some proposed solutions.....so far nothing worked. Can someone give me some assistance so I can begin to use my ICal again? If one prefers, you can use my direct email, masselliroma (at) tele2 (dot) it or masselliroma (at) gmail (dot) com Thanks in advance, Joe
My issue has been resolved. By reactivating my MobileMe subscription and accomplishing a sinc of my iMAC, Macbook and iPhone calendars, something fixed the problem.
-
Error in opening EM..plz Help..
Error in opening EM..plz Help..
Hi..
I want to start the Enterprise Manager
i started step by step..
but when i had started em in the console
/oracle/infs/bin/
./emctl start
it gaves me these error..
"$ emctl start
Waiting for EM to initialize ..log4j:ERROR setFile(null,true) call failed.
java.io.FileNotFoundException: /oracle/infs/sysman/log/emd.log (Permission denied)
at java.io.FileOutputStream.openAppend(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:100)
at java.io.FileWriter.<init>(FileWriter.java:52)
at org.apache.log4j.FileAppender.setFile(FileAppender.java:284)
at org.apache.log4j.RollingFileAppender.setFile(RollingFileAppender.java:198)
at org.apache.log4j.FileAppender.activateOptions(FileAppender.java:239)
at org.apache.log4j.config.PropertySetter.activate(PropertySetter.java:247)
at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:123)
at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:87)
at org.apache.log4j.PropertyConfigurator.parseAppender(PropertyConfigurator.java:616)
at org.apache.log4j.PropertyConfigurator.parseCategory(PropertyConfigurator.java:574)
at org.apache.log4j.PropertyConfigurator.configureRootCategory(PropertyConfigurator.java:481)
at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:405)
at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:304)
at org.apache.log4j.PropertyConfigurator.configure(PropertyConfigurator.java:312)
at oracle.sysman.emd.emdcli.EmCtl.initLoggingSystem(EmCtl.java:1376)
at oracle.sysman.emd.emdcli.EmCtl.checkEMDStatus(EmCtl.java:413)
at oracle.sysman.emd.emdcli.EmCtl.main(EmCtl.java:206)
.log4j:ERROR setFile(null,true) call failed.
java.io.FileNotFoundException: /oracle/infs/sysman/log/emd.log (Permission denied)
at java.io.FileOutputStream.openAppend(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:100)
at java.io.FileWriter.<init>(FileWriter.java:52)
at org.apache.log4j.FileAppender.setFile(FileAppender.java:284)
at org.apache.log4j.RollingFileAppender.setFile(RollingFileAppender.java:198)
at org.apache.log4j.FileAppender.activateOptions(FileAppender.java:239)
When i tried to start in the browser (http://servername:1810)
it didn't display any data in the application server part/box!!
Plz help me. thanksHi..
i tried to trace the error..so, i tried to open the targets.xml in
/oracle/infs/sysman/emd
it gaves me "Permission Denied"
Plz help -
I have Mac Mini OSX 10.6.2; Safari states "can't open server since url starting with 'open-help-anchor'. I didn't type this but possibly I was hijacked but it only occurs on the specific banking site I'm trying to get into. How do I get into the web site I've always been able to get but now this is blocking it? Is this related to cookies?
https://discussions.apple.com/message/25085868#25085868
I started a thread in safari maverics, I ment to put it in iOS Safari. New Thread lists all the steps I've taken. No I haven't tried another browser. I've only ever used Safari on my iDevices. -
Regarding drop down list, any body help me plz.. very very urgent
i have to create a drop down list and in that if i select a value it should go to select query and display hte result in the output
for example if i select open in the inout list. that should go to a partiucular query which i write and after that when i process the report that option open should be displayed in the output
any body help me plz.. very very urgentCheck code below..
TYPE-POOLS: vrm.
CONSTANTS: c_pgp_cmd(20) TYPE c VALUE '/opt/pgp/bin/pgp'.
DATA : droplist TYPE vrm_values,
dropval LIKE LINE OF droplist,
w_command(2000) TYPE c VALUE '/usr/local/bin/ssh'.
DATA: BEGIN OF t_cmdres OCCURS 0,
line(500),
END OF t_cmdres.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-005.
PARAMETERS: tar_sys(10) TYPE c AS LISTBOX VISIBLE LENGTH 20 LOWER CASE,
filepath TYPE esefilepath,
pgpkey(1000) TYPE c LOWER CASE,
option(25) TYPE c AS LISTBOX VISIBLE LENGTH 15 LOWER CASE,
pass(100) TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
PERFORM set_screen.
AT SELECTION-SCREEN OUTPUT.
IF option EQ 'encrypt'(000).
LOOP AT SCREEN.
IF screen-name = 'PASS'.
screen-input = 0.
MODIFY SCREEN.
EXIT.
ENDIF.
ENDLOOP.
ELSEIF option EQ 'set-preferred-ciphers'(001).
LOOP AT SCREEN.
IF screen-name = 'FILEPATH'.
screen-input = 0.
MODIFY SCREEN.
EXIT.
ENDIF.
ENDLOOP.
ENDIF.
START-OF-SELECTION.
write:/ 'Done'
*& Form set_screen
FORM set_screen .
dropval-key = 'oapg18dv'(002).
dropval-text = 'oapg18dv : DEV'.
APPEND dropval TO droplist.
dropval-key = 'oapg18te'(003).
dropval-text = 'oapg18te : TEST'.
APPEND dropval TO droplist.
dropval-key = 'oapg18pr'(004).
dropval-text = 'oapg18pr : PRD'.
APPEND dropval TO droplist.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'TAR_SYS'
values = droplist
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
CLEAR: dropval,
droplist[].
dropval-key = 'encrypt'(000).
dropval-text = 'Encrypt'.
APPEND dropval TO droplist.
dropval-key = 'set-preferred-ciphers'(001).
dropval-text = 'Set cipher'.
APPEND dropval TO droplist.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'OPTION'
values = droplist
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
CLEAR: dropval,
droplist[].
ENDFORM. " set_screen
Reward if useful
Function Module <b>VRM_SET_VALUES</b> is used to set values for droplsit..
and be careful about Text Elements in this report.
Regards
Prax -
A question about transparent gateway,sb help me plz!!
hi all:
i met a problem while trying the transparent gateway for ibm drda
1.i have the listner.ora configured like this:
=================================================================
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = felix)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(PROGRAM = tg4drda)
(SID_NAME = TEST)
(ORACLE_HOME = E:\oracle\oradrda)
=================================================================
2.and the tnsnames.ora configured like this:
=================================================================
TEST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.18.10.11)(PORT = 1521))
(CONNECT_DATA =
(SID = TEST)
(SERVER = DEDICATED)
(HS = ok)
(HS = OK)
=================================================================
3.and the initTEST.ora configured like this:
=================================================================
set DRDA_CONNECT_PARM=localhost:446
DRDA_REMOTE_DB_NAME=test (database name of db2)
=================================================================
then i log on as user system and create a database link dblink1.But when i try the sql statment "select * from t1@dblink1"
such error came up:
# ORA-28545: error diagnosed by Net8 when connecting to an agent
NCRO: Failed to make RSLV connection
#ORA-02063:preceding 2 lines from dblink1
somebody help me plz,tell me how to deal with such a problem,thanks a lot!!!
Best regards!Hi Felix,
Please take a look at note 234517.1 on metalink (copied below).
This note explains how to resolve the following error messages when using Transparent Gateways or Generic Connectivity:
ORA-3113; ORA-2019; ORA-2085; ORA-12154; ORA-28545; ORA-28546; ORA-28509; ORA-942; ORA-904; ORA-28500;ORA-28528
SCOPE & APPLICATION
This note should help to solve common error messages when using generic
connectivity or gateways.
Common errors with gateways or generic connectivity
Here are the English descriptions of each error; to compare your message
with the message below, you can alter your current SQL*Plus session
and compare your message with the messages listed in this note:
alter session set nls_language=american;
ORA-3113:
SQL> connect system/manager@tg4msql;
ERROR:
ORA-03113: end-of-file on communication channel
Resolution:
You can't connect with SQL*Plus directly to the foreign
data store. HS or Gateways are only designed to work with
a database link from an Oracle database to the foreign
data store
ORA-2019:
SQL> select * from all_catalog@demo;
select * from all_catalog@demo
ERROR at line 1:
ORA-02019: connection description for remote database not found
Resolution:
Create a database link to connect to the foreign database
create [public] database link <db link name>
connect to <user of the foreign datastore>
identified by <password of this user>
using '<SQL*Net ALIAS>';
For case sensitive usernames/passwords of foreign databases,
surround the user and password with double quotes.
create [public] database link <db link name>
connect to "<user of the foreign datastore>"
identified by "<password of this user>"
using '<SQL*Net ALIAS>';
ORA-2085:
SQL> select * from all_catalog@tg4msql_v91;
select * from all_catalog@tg4msql_v91
ERROR at line 1:
ORA-02085: database link TG4MSQL_V91.DE.ORACLE.COM
connects to HO.WORLD
Resolution:
This problem is related to GLOBAL NAMES.
The simplest way to disable global naming is to alter
the current session.
alter session set global_names=false;
The other solution is to add a global_name to the
gateway/hs:
HS_DB_NAME = <datasource>
HS_DB_DOMAIN = <DOMAIN>
But the HS_DB_NAME must not exceed 8 characters and
must not contain any extra characters. If this is not
possible, the globale naming can be disabled by setting
GLOBAL_NAMES = FALSE in the init.ora of the database
as well
ORA-12154:
SQL> select * from all_catalog@demo;
select * from all_catalog@demo
ERROR at line 1:
ORA-12154: TNS:could not resolve service name
Resolution:
The database link uses a SQL*Net alias not specified
in the TNSNAMES.ORA of the database server.
Query the data dictionary to figure out the 'HOST'
specified for the database link:
select db_link, host from user_db_links;
or
select db_link, host from dba_db_links;
The 'HOST' value is the alias of the SQL*Net.
Please make sure it exists in the TNSNAMES.ORA file
present at the Oracle database server.
ORA-28545:
SQL> select * from all_catalog@demo;
select * from all_catalog@demo
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
NCRO: Failed to make RSLV connection
ORA-02063: preceding 2 lines from DEMO
Resolution:
There's something wrong with the SQL*Net connection:
- checking the SQL*Net -> Listener configuration with TNSPING:
tnsping <SQL*Net alias>
TNS-12545: Connect failed because target host or object
does not exist
The HOSTNAME specified in the TNSNAMES.ORA is invalid
Try with the OS ping to resolve the hostname / IP adddress
TNS-12541: TNS:no listener
The hostname specified in the listener.ora points to a
machine without an Oracle listener, the listener on that
machine is not running or the port number is wrong.
NO ERROR with TNSPING:
This might be caused by an invalid SID configuration.
Please make sure, that the SID in the listener refelects the
SID specified in the TNSNAMES.ORA. Make sure you don't mix
SID syntax with SERVICE_NAME syntax.
If everything is configured well, please make sure that
lsnrctl status shows at least one service handler for
hsodbc. Probably restart the listener AFTER changing
the listener.ora file.
Still no error found, then please enable listener tracing
(level support) and have a look at the listener.trace file
after retrying the same select statement again.
In the file you should see the connect from the Oracle
database to the listener. After a few lines you should see that
the listener tries to open 2 pipes. Does this work or does it
fail and again a few lines later you see a hex/ascii block that
conatins an error stack like:
ERR=12500, CODE=12500, EMFI=4, CODE=12560, EMFI=4?
Then please check again the listener.ora file; is the
ORACLE_HOME directory specified within the listener.ora file
correct? Or if you are using environment variables in the
listener.ora please replace them with absolute paths.
ORA-28546
CAUSE 1:
SQL> select * from all_catalog@demo;
ERROR at line 1:
ORA-28546: connection initialization failed, probable Net8 admin error
ORA-02068: following severe error from DEMO
ORA-03113: end-of-file on communication channel
Resolution:
This error might be caused by a misplaced 'HS=' or 'HS=OK' key
word in the tnsnames.ora.
Make sure HS= or HS=OK is present and that the SID Connect String
looks like:
(CONNECT_DATA =
(SID = tg4msql)) <= there are 2 closing brackets! The HS
(HS=)) <= key word is OUTSIDE of connect_data
CAUSE 2:
SQL> select * from all_catalog@test;
ora-28546: connection initialization failed, probable net8 admin error
ora-29511 lost rpc connection to heterogeneous remote agent SID ...
ora-02063 preceding 2 lines from test
Resolution:
This behaviour can be found in situations with a version missmatch.
For example the Oracle database is release 9.2.0.4 and the gateway
itself 9.2.0.1
=> The fix is to apply the same database patchset (gateway patches
are part of the database patchsets) to the gateway home as well;
or if the gateway 9.2.0.1 was installed into a 9.2.0.4 database
directory to reapply the database patchset.
ORA-28509:
Older gateways report this error instead of giving a
deltailed error description.
Resolution:
This error indicates the same as the errors described above.
They can be solved by checking the SQL*Net configuration
for the gateway / generic connectivity setup.
ORA-942:
SQL> select irgendwas from demo@demo;
select irgendwas from demo@demo
ERROR at line 1:
ORA-00942: table or view does not exist
...(the text here depends on the library/odbc...
ORA-02063: preceding 2 lines from DEMO
Resolution:
make sure the table exists in the foreign data store.
Pay attention that some foreign data stores are case
sensitive and thus the table_name must be surrounded
by double quotes.
ORA-904:
SQL> select irgendwas from "demo"@demo;
select irgendwas from demo@demo
ERROR at line 1:
ORA-00904: "IRGENDWAS": invalid identifier
Resolution:
Make sure the column name specified exists at the foreign
table and if it is case sensitive, surround it by double quotes.
ORA-28500:
CAUSE 1:
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned
this message:
[Generic Connectivity Using ODBC][H006] The init parameter
<HS_FDS_CONNECT_INFO> is not set. Please set it in init<orasid>.ora
file.
ORA-02063: preceding 2 lines from HSODBC
Resolution:
The connect information to the remote database or the ODBC DSN is not
found. Add the proper connect string required by the gateway or hs/
generic connectivity agent.
CAUSE 2:
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
ORA-28541: Error in HS init file on line 11.
ORA-02063: preceding 2 lines from HSODBC
Resolution:
The init.ora of the gateway / generic connectivity contains an
invalid parameter in line 11
CAUSE 3:
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_InitTdp: errors.h (2005): ;
[Microsoft][ODBC SQL Server Driver][SQL Server]Error authenticating user
'sa'. (SQL State: 00000; SQL Code: 18456)
ORA-02063: preceding 2 lines from HSODBC
Resolution:
The username password for the database link is wrong or no connect
information was specified.
Make sure that for case sensitive usernames/passwords the create
database link statement contains the double quotes for the
username/passwords.
Further make sure you specified a username and password. OS
Authentication is currently not supported by most of the
gateways of by generic connectivity.
CAUSE 4:
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned
this message:
[Generic Connectivity Using ODBC]DRV_InitTdp: errors.h (2005): ;
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does
not exist or access denied.[Microsoft][ODBC SQL Server Driver]
[TCP/IP Sockets]ConnectionOpen (Connect()).
(SQL State: 00000; SQL Code: 10061)
ORA-02063: preceding 2 lines from HSODBC
Resolution:
Make sure the foreign database is up and running on the configured
machine.
ORA-28528:
SQL> select * from DecimalType@hsodbc;
ERROR:
ORA-28528: Heterogeneous Services datatype
conversion error
Resolution:
The language of the foreign data store (remote database)
does not match with your Oracle database settings.
Starting with 9.2.0.l4 this error might occure for example '
if numeric values will be truncated.
Adapt in the Gateway/Generic Connectivity initialisation file
the parameter HS_LANGUAGE.
HS_LANGUAGE must be set to the LANGUAGE used in the FOREIGN
database.
as a play with 2 settings and check out which one works:
1. Try:
HS_LANGUAGE=AMERICAN_AMERICA.WE8ISO8859P1
Do you still get the error? Yes, proceed with the second try:
2. Try:
HS_LANGUAGE=GERMAN_GERMANY.WE8ISO8859P1
(or to any other territory that uses a komma as decimal separator)
ORA-24274:
SQL> select * from all_catalog@<db_link>;
select * from all_catalog@<db_link>
ERROR at line 1:
ORA-28522: error initializing heterogeneous capabilities
ORA-28522: error initializing heterogeneous capabilities
ORA-28559: FDS_CLASS_NAME is <GTW>9.2.0.5.0_128, FDS_INST_NAME is <link>
ORA-02063: preceding 3 lines from %s
ORA-00604: error occurred at recursive SQL level 1
ORA-24274: no row exists in the HS$_BASE_CAPS table for these parameters
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_HS_UTL", line 431
ORA-06512: at "SYS.DBMS_HS_CHK", line 51
ORA-06512: at "SYS.DBMS_HS_UTL", line 48
ORA-06512: at "SYS.DBMS_HS", line 38
ORA-06512: at line 1
Resolution:
This special combination of errors might occure after applying
the Oracle database and gateway patchset 9.2.0.5 WITHOUT
running catpatch (=the upgrade script of the database).
=> Please run catpatch. If it ran successfully but connectivity
still fails you may run
cathnohs.sql and caths.sql to recreate the HS data
dictionary tables. BUT BE CAREFUL: Running CATHNOHS drops ALL
gateway/generic connectivity related database links!
Hope this helps,
Mark. -
I found My iPhone contacts on my friends Iphone we both have 4s! But we use the same apple ID and ICloud ID! How can undo what happened? all my private stuff is now on his phone!!! help me plz!!?
Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this. -
Several customers running different versions of Office 2011 (14.4.1-14.4.5) on OSX varying from 10.7.5 to 10.9.5, running on various kinds of hardware (iMac/MacBook Pro/MacBook Air) of various ages are having issues opening *.doc files if the Word is already open. The error message that gets displayed is, "XXXX.doc uses a file type that is blocked from opening in this version"
When the customer tries to open the same file via File-Open, she gets "The file is locked for editing. you can open the file as read-only".
When trying to do so, she gets "Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters".
If Word gets Force-quit, the same document opens without any problems.
1. Repairing Disk permissions was ran several times. and the volume was found to be OK.
2. I have noticed that in this scenario either deleting the normal.dotm or com.microsoft.word.plist (~/Library/Preferences) sometimes resolves the issue, sometimes it doesn’t. There is no pattern to follow. All versions of Office are affected, the fully updated and the non-updated ones.
3. I have tried completely removing the suite using Office 2011 Uninstall.app and/or Remove Office 2011 Uninstaller.pkg, then going through customer's library and manually removing all the Office references.
4. None of these systems had Office 2008 in the past.
Any help will be greatly appreciated.Reboot both the Mac and the server. Word opens .DOC files and Excel opens .XLS files. As you have found out by copying the files to the computer. It is the connection between the 2 computer that is causing the error.
-
I have Microsoft Word for Mac 2011, version 14.3.1. When I try to open a document, an error occurs, says file type is "blocked from opening in this version." This was NOT immediately after a version update. Any ideas? Thank you.
Take a look here:
http://support.microsoft.com/kb/953266
If that doesn't help, I'd suggest you take up the question in Microsoft's own forums or with Microsoft support.
Regards. -
my phone locked in egypt i forget my email and password for the i phone 4s and now the iphone locked want the email and pass for activate iphone help me plz
help me for i gorget the old email and pass and i can't open my iphone and i make new email in apple and not work in i phone help me
<Personal Information Edited by Host>Start here:
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818?viewlocale=en_US&locale=en_US
There is no workaround for Activation Lock. You either have to remember
the email and password or you will not be able to use the iPhone. -
help me plz.. i,ve got a apple i phone 4 and i'm the 2 owner of it and i dont have it's apple id and passward for it and 1st owner doesnt know it too so what can i do for this plz help me....
Neither can we. Only the original owner can help you, surely he/she can reset their password.
-
I have a lock rotation next ti my battery on my iPad 2 and it won't change from landscape and I tried to reset it but nothing and I tried from lock rotation to mute but nothing and I don't no what to do now. Can u help me plz?
With Settings > General > Use Side Switch To set to 'Lock Rotation' have you then moved the switch on the right-hand side of the iPad above the volume control 'off' ?
Or with the switch set to control 'notification mute' you should be able to unlock rotation via the far left of the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't being controlled by the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
I've downloaded free trial versions of illustrator and photoshop but software not opening.Help!
Nobody can help you with at least some system information....
Mylenium -
Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Maybe you are looking for
-
Segunda via de nota fiscal- copy of receipt
Good morning! I`d like to receive a copy from a purchase that i made last year in may from a store in L.A . I`ve bought a notebook Dell inspiron 14 7000 series 7437 serial number (removed per forum guidelines) and i lost the receipt. is that possibl
-
I got an 2049x2049 matrix which represents an detector image. I analyse my measured data in a while loop and every time I find a detector event I increase the corresponding matrix cell about one. But this process is awful slow. Approx. 5min for 2500
-
Opinion Needed...exporting iPhoto pics
I already use time machine for my Mac. As a second line of defense for my pics, I was thinking of having a second form of backup. I believe I have a couple options. 1. Use the "export" feature in iPhoto to place the raw files on an external HD.
-
BAPI/FM to Create Projects from Templates
Is there any BAPI/FM that can create Operative Project Structures referring the Standard WBS including all objects i.e, WBS,N/W,Activities,Milestone of standard project? If not, what could be the work around? Regards Sreenivas
-
How can i install ios7 in iphone 4s
how i install ios 7 in iphone4s