HT201442 hi i cant get my ipad 2 work any advice
hi im having trouble restoring my ipad it seems to be blocked on itunes
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom
Similar Messages
-
TS2972 cant get home sharing to work any ideas?
cant get home sharing to work. any ideas?
HOME SHARING
Setting up Home Sharing on your Computer
http://support.apple.com/kb/HT4620?viewlocale=en_US&locale=en_US
Understanding > http://support.apple.com/kb/HT3819
How to > http://support.apple.com/kb/HT2688
Troubleshooting > http://support.apple.com/kb/TS2972 -
I need help getting my ipad to work
You have to set up an account and sync content to the iPad
Maybe this will help
http://gigaom.com/apple/walkthrough-initial-ipad-setup/ -
I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I changed a few settings on my iPad and now cant get the iPad to shut off with the shutoff button and the button to get to all the icons won't let me get back to settings to change the settings back. Can anyone help?
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
I had my hard drive replaced and I cant get my email to work on the new hard drive. I have the ! in the triangle next to the inbox. I tried "take all accounts online" and it ddidnt work. The email account is working on my iphone and ipad, and my macBook is connected to the internet.
Cant get help with this issue on Apple Support, so I have to go to the Apple store to the Genius Bar to get assistance. All the help issues are so technical in their jargon, that I cannot understand how to fix the issue.
-
how can i get my ipad to work because ,y little brother put a password and cant get into it ???
You must restore the iPad with iTunes.
-
i cant get my ipad to sync
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
Cheers, Tom -
I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?
For a "hard" restart of your iPad just press the home and power button at the same time and hold it for at least 10-15 sec. until it restarts.
-
HT4623 i cant get my ipad to up date past iso5.1.1 ??
I Cant get my ipad to update past iso 5.1.1 ??
If you need to update apps, you should read the article in this link which explains how to update or get older versions of apps that are compatible with your ios 5.1.1.
http://9to5mac.com/2013/09/17/ios-app-store-now-allows-legacy-app-downloads-to-s upport-older-hardware-and-software/
Hope this helps. -
I have a message on my ipad saying ipad is not backed up. back ups happen when this i pad is plugged in locked and connected to wi-fi. cant get on ipad and dont know what to do as i am new to ipad. can someone help?
Welcome to Apple Support Communities
Hold both Power and Home buttons for 10 seconds until your device restarts, so you will be able to use it again.
The Power button is the one that you use to put your iPad in sleep mode (at the top of the iPad), and the Home button is at the bottom of the screen -
I cant get my ipad to play movies AVI i have downloaded an App called PlayerX, and it transfers the movies over to the ipad but doesn't play them, what to do??
Have you contacted app support or maybe view this video from the website? Are you trying to play them within the app itself? Did you double tap on the video that you want to watch?
http://playerx.pentaloop.com/help/ -
HT201412 I cant get my ipad to scroll up or down
I cant get my ipad to scroll up or down. How do I fix it?
I cant get my ipad to scroll up or down. How do I fix it?
-
How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?
If you have iOS 5 installed on it, you don't need a PC. simply turn it on and set it up.
if you don't have iOS 5 then you'll need a computer. -
Cant get graphics card to work on MS6166 board
Iam tring to install nvidia graphics card(PCI) to my MS6166 mother board but cant get new drivers to work,I have disabled on board graphics via jumper on board but new graphics card still wont work.
HELP!
Anybody had same problem?Well, have you tried leaving the monitor cable connected to the onboard VGA and tried booting up? Sometimes you need to disable it within BIOS.
Maybe you are looking for
-
Decode Not working in sql loader
I had a requirement of loading flatfile into staging table using SQL Loader, One of the columns in the the Flat file is having values FALSE or TRUE and my requirement is that I load 0 for FALSE and 1 for TRUE which can be achieved by simple DECODE fu
-
Shows tons of unwanted pop-up ads and get redirected to unknown sites automatically
When i started my PC lately, it was fine. But now i have a problems With my computer. When I connect my system to Internet and start browsing, I find lots of unwanted ads coming on my desktop. Aside this my browser also get redirected automatically t
-
Can I connect landline phone to the 4G LTE wireless router?
Can I connect a landline phone to the 4G LTE wireless router?
-
How to use multiple outer join in ODI
SELECT Count(*) FROM student S, department D, course C WHERE D.S_Name=S.S_Name AND D.Dept_Name = C.Dept_Name (+) and S.C_Name =C.C_Name (+) And (D.Dept_ID = 1); I run this query. I got an ORA-01417 error.
-
Example of Aperture dead pixel problem
A lot of people have been complaining about green pixels in their converted output. I noticed a pixel in the RAW image as rendered within Aperture and went in for a closer look. It's more like a dead pixel. I've put up crops of an image mangnified at