HT201442 how to solve error 3004?
Hi All,
I haveing problem during restoring. Unable to restore due to error 3004. Anybody knows how to solve it. Thk.
Hello, kyawmyintshein85.
Thank you for visiting Apple Support Communities.
Here are the steps that I would recommend going through when experiencing restore error 3004.
Resolve communication issues
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build".
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Also, make sure to process and updates for iTunes and your computer.
Cheers,
Jason H.
Similar Messages
-
How to solve error -1450?
I have been re-installed iTunes, and it keeps pop-up with the error -1450 ( cannot save music library ), and it reloads all the playlist each time I switch on the computer and open iTunes.
I have been re-install iTunes after the error appear, and it seems although I have re-install iTunes, the problem doesn't solve and keeps repeat.
For any kindness, please tell how I can fix this error, as I cannot find any articles on support page about this.
ThanksDoes anyone know how to solve error 1450 or even what
caused it!? This problem is killing me.
I found this by doing a search on Google for "Error 1450": http://support.microsoft.com/kb/236964/EN-US/ -
TS3694 How to solve error 3194 ?
How to solve error 3194 in iTunes, when trying to upgrade iPod touch to ios 5 ? Thank you.
The common errors and their resolution are contained here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
How do I solve Error 3004?
I am trying to restore my iphone but I keep getting the Error 3004 message. I have followed all of apple's troubleshooting steps and I'm no closer to solving the problem. Beginning to regret buying a smart phone.
And the top hit on google is... http://support.apple.com/kb/ts3694
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers. -
HT201442 hi What is error 3004 and how do I fix it?
hi What is error 3004 and how do I fix it?
Hello, Meysam321.
Thank you for the question. Here are the steps that I would recommend going through when receiving error 3004.
Resolve communication issues
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build".
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Cheers,
Jason H. -
How to solve Error in http connection. Error -1
urlMidlet2===http://localhost:8080/testProj?userId=20&selMPBL=23&svMPBL=IPOD+Touch+Screen+e!1!Tue+Jan+06+00:00:00+UTC+2009!Tue+Jan+06+00:00:00+UTC+2009!Sat+Jan+31+00:00:00+UTC+2009!Mp3+Player!IPOD!Rejected!12
[j2mepolish] Generic/DefaultColorPhone: !1!2!1222!13333
[j2mepolish] Generic/DefaultColorPhone: Protocol for this connection is http
[j2mepolish] Generic/DefaultColorPhone: This object is connected to localhost host
[j2mepolish] Generic/DefaultColorPhone: HTTP Port in use is 8080
[j2mepolish] Generic/DefaultColorPhone: respCode=====-1
[j2mepolish] Generic/DefaultColorPhone: Error in opening HTTP Connection. Error#-1
Why is this error coming? How to solve it?
Thanks in advance.
Edited by: J2me_Beginner on Jun 7, 2009 9:38 PMI am making a form using an interface. When Activate the Form, I got this error:
Invalid HTTP connection: ADS
Message no. FPRUN000
But I do not know how to solve or config ADS. Any one know how to slove this error ?
Thanks a lot. -
How to solve error essbase encoding ?
Dear All,
Today, I just wanted to load data into a demo database, however, I found that the load information of data load results is error encoding as below:
ÕýÔÚ¶ÁÈ¡Êý¾Ý¿â [Demo] µÄ¹æÔò SQL ÐÅÏ¢
ÕýÔÚ¶ÁÈ¡À´×ÔÊý¾Ý¿â [PLP] ¹æÔò¶ÔÏóµÄ¹æÔò
ÆôÓÃÁ˲¢ÐÐÊý¾Ý¼ÓÔØ: [1] ¿é×¼±¸Ị̈߳¬¶ø [1] ¿éдÏ̡߳£
¼ÓÔØ´ËÊý¾ÝÎļþδÐÞ¸ÄÈκÎÊý¾ÝÖµ
[LoadData.rul] µÄÊý¾Ý¼ÓÔؾ¹ýµÄʱ¼ä: [9.516] Ãë
Êý¾Ý¿âµ¼ÈëÒÑÍê³É ['ZZTest'.'Demo']
ÒÑ×¼±¸ºÃÊä³öÁÐ: [0]
Of course, I modified the env variable ESSLANG from English_UnitedStates.Latin1@Binary to SimplifiedChinese_China.MS936@Binary. What a pity, it doesn't work.
As you know, the Essbase Language was set to SimplifiedChinese_China.MS936@Binary when configuring.
So, who knows how to solve it ?Open log with utf8 text editor
u can remove chines localization if copy to bin files from C:\Hyperion\products\Essbase\EssbaseServer\localized\en\bin -
How to solve error when run Depreciation (T-Code:AFAB)
Dear All Experts,
Hi,
I found error when run Depreciation for period 9 FYI. I had run Planed posting period Depreciation (TCode: AFAB). with fiscal year: 2010, posting period: 9, reason for posting run: Planed posting run. Select on Test Run. Then i found error message as below.
Documents manually posted within dep.doc.number range
Message no. AA728
Diagnosis
In the number range interval for the document type for posting
depreciation, a document has been posted which was not created within
the framework of depreciation posting. The last document posted by
depreciation posting was assigned the number .
Procedure
Contact your Systems Specialist. When changing the number range interval
for the document type in depreciation posting, you have to specify a new
interval in which no documents exist. Using organizational measures, you
can guarantee that there are no documents apart from those created by
depreciation posting in this number range.
Would you help me how to solve this error?
Thank you in advance
Best Regards
Utarat.PHi Utarat,
first question is: have you really manually posted a Documents within dep.doc.number range
If you post with RABUCH00, note 193984 could be relevant for you.
Check if the intervall in Table TABA don't fits with the Intervall in BKPF.
Example:
TABA
MANDT BUKRS AFBLGJ AFBLPE AFBANZ BLNRF BLNRT XBUKZ
100 XXXX 2010 004 01 4200000013 4200000016 X
100 XXXX 2010 005 01 4200000017 4200000020 X
100 XXXX 2010 006 01 4200000021 4200000024
On the other Hand In Table BKPF (or Tr. FB03) you can see that 4200000037 already
exits.
BUKRS BELNR GJAHR BLART BUDAT CPUDT CPUTM TCODE
XXXX 4200000024 2010 YY 30.06.2010 06.07.2010 19:36:30 ABF1
XXXX 4200000037 2010 YY 30.06.2010 06.07.2010 19:37:47 ABF1
Regards Bernhard -
How to solve error code -1074397179 in Imaq Attribute VI
I keep getting error message (-1074397179) when I run the imaq attribute VI. What should I do to solve this problem? What are the parameters that i can change to solve this. The error message gave this as img_err_par1. But I have no idea how to solve this problem.
Attachments:
IMAQ_Attribute.vi 74 KBI compared your attribute VI to my own (which is IMAQ 2.6 and working great) and the only differences are in the Attributes input and the Type/Attr/ID input. I have attached my version of the VI in LabVIEW 6.1 below. Try using this and see if it gives you the same errors.
Hope this helps-
Julie S.
Attachments:
IMAQ_Attribute.vi 77 KB -
How to solve "error occurred in the data manipulation engine"? 64bit Windows 7
Hi all
I'm having quite a testing time here trying to use the new SAP PA 2.0. After installation the software launches, the Automated Analytics seems to work fine but not the Expert Analytics.
Steps as follows:
Launch PA
Choose and launch Expert Analytics
Choose Try with Samples
Open the Dairy Wholesaler file
Error: An error occurred in the data manipulation engine. Check the manipulation parameters. (HDB 01001)
I also get this same error when I try to create my own New Dataset.
I’m on 64bit Windows 7 Pro
Is there anyone who knows how to solve this problem. I've searched the SCN and online and have tried the following:
1. Uninstall and re-install. Doesn't help
2. Uninstall and delete old lumira related folders on the C drive e.g. the SAPPA and SAPVI folders on the C drive, then re-install.
Much appreciated if anyone could shed some light on this. I've previously had Lumira working with no issues. I've since uninstalled Lumira, Predictive Analytics, and Infinite Insights (as PA 2.0 is all of this combined)
Regards
RiaIn case anyone has the same problem, I found the the following helpful (taken from Error after upgrading to 1.18 ). The solution is for Lumira however its the same steps for PA2
1. You might want to try a ‘clean’ uninstall / reinstall . After uninstalling, try deleting these folders:
C:\Users\Public\sapvi
C:\Users\<user>\AppData\Local\SAP\Lumira
C:\Users\<user>\AppData\Local\Temp\sapvi
In this step I searched for every SAP related file in AppData in the Public, User, and my own username folder under \Users\
2. Next, to launch the application, explicitly click "Run as Administrator" on the install file -
How to solve error : ORA-6512 at APPS.EAM_WORKORDER_PKG
In new EAM installation process, the next error occurs during the creations of new operations to WO and attachments of new activities, which have several operations.
ERROR:ORA-06502: PL/SQL :numeric or value error: character string buffer too small
ORA-06512: at ''APPS.EAM_WORKORDER_PKG'', line 1529
ORA-06512: at ''APPS.EAM_WORKORDER_PKG'', line 1966
The implementation is in 12.0.4 version.
Some one know how to solve this issue en EAM EBS.
Thanks.Thanks for your help,
I have reviewed all information sent for you. The issue finally was solve with the action plan descibed in the next :
WICDOL - Autocreate Final Assembly Orders Completing With Warning - "ORA-01400: cannot insert NULL into ("WIP"."WIP_OPERATIONS"."WSM_BONUS_QUANTITY") " [ID 734605.1]
This particular issue afects the operations creation, assigment of activities with predefined operations and state change. -
How to solve Error -1074396080 occurred at IMAQ array to color Image
Hello,
I am getting above mentioned error.
Here I have attached my screen shot of the error.
Could any one Please guide me how to solve this error.
I am using Kinesthesia kinect driver which generate U24 Bit RGB Image and I want to convert it in IMAQ Image type, But I am getting mentioned error.
But when I am not using the vision acquisition and vision assistant then every thing is fine means there is no any error which I have attached in attachment 2.
Please guide me how to solve this problem.
Thank you very much.
Solved!
Go to Solution.
Attachments:
invalid image type.png 251 KB
imaq2.png 56 KBThank you very much for quick reply.
I follow your instruction but it give me still same error.
here in attachment I have attache screen shot as well Vi so you have a look.
thank you very much once again for help and time.
Attachments:
Unbenannt.png 174 KB
kinect templet.vi 137 KB -
How to solve error message in webui
Hi ,
Please find the attachment.Ho
I am getting this error in webui level. How to solve the error messages in webui level.
Item 30 : Access to changed configuration data is not possible.
What procedure i will follow can you tell me.
Regards,
SaiDear Sai,
please consider note 1647590, this note might help you tol solve the situation.
Best regards
Rene -
HT201442 how to fix Error 3194
how to fix Error 3194
Try following along with the article that was linked above your post.
Any luck modifying the hosts file or testing without the security software? -
HT201442 how to fix error 3194 or 21
how to fix error 3194 or 21
sherdil ghangas wrote:
how to fix error 3194 or 21
See Here for those Error messages > http://support.apple.com/kb/TS3694
Good Luck.
Maybe you are looking for
-
Accidentally shut down the pc and firefox did not come back with option restore previous session at the first screen even in History-Restory previous session is Grey. My settings are clean history after firefox is closed. Is there any change to get b
-
Photoshop CS5 Screen Resolution
<START OF RANT> Having recently decided to upgrade all my design software, I can't begin to tell you how disappointed I was (and still am) to find that after spending £231.12 GBP on buying Photoshop CS5 (upgrade from CS2) I'm unable to "Save As" and
-
How to calculate the depreciation for an asset under repair for a month
Hi, I have placed an asset (Laptop) into service 01.01.2013 and I have calculated the depreciation for the 1st period and in the second period 01.02.2013 the laptop is broken and which was sent to the service center and for that entire month no depre
-
Unable to get database instances
I have a custom Java plugin that I had to migrate to a new server. I'm assuming I am missing some configuration somewhere that was present on the old server. I am getting this error: com.primavera.integration.client.ClientException: Unable to get dat
-
My bank does not accept the new version of Firefox
My "Bank-ID" does not work in the new Firefox version. How do I go back to earlier version?