HT201444 4005 will appear in the recovery system hardware cause it? I have tried to replace numerous devices and cables, but still reported 4005.

4005 will appear in the recovery system hardware cause it? I have tried to replace numerous devices and cables, but still reported 4005.

The fix was to completely remove all Apple Software following guides in previous posts.
Then download and re-install latest iTunes 64-bit, making sure to Run As Administrator.
This fixed it. Now the next thing seems to be that as I move from one device to another to close and restart iTunes between each one. Treat it gently. It seems to break easily and a lot.

Similar Messages

  • TS3297 I keep getting an error when trying to add songs to the iCloud. Error reads: "We could not complete your iTunes_Store request. An unknown error occurred (4002)" I have tried to completely delete iTunes and reinstall but still getting error.

    I keep trying to download songs to ICloud but keep getting an error: "We could not complete your itunes_store request. An unknown error occurred(4002)"
    I have deleted itunes and reinstalled but continue to get error. Want else can I do?

    Thanks jdnjo.  Your fix also worked in Windows 8!

  • My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please?

    My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!

    Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
    Call Apple Care and see if your device is still under warranty to get it replace

  • Google calendar is getting the error "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." I have tried disabling cookies, clearing cookies and cache but that didn't work.

    Google calendar is getting the error "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." I have tried disabling cookies, clearing cookies and cache but that didn't work.

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    * http://kb.mozillazine.org/The_page_is_not_redirecting_properly

  • Hi all issues with iphone 4 after update apple recovery iboot USB driver access denied have tried everything I can find and can't get it to work pulling my hair out

    Hi everyone
    Need some help desperately
    Was syncing my iphone through itunes and it wanted me to update the version which I thought it did
    Now my phone keeps telling me to connect to itunes which I have tried without success.
    In device manager it's showing as apple mobile device in recovery mode with an exclamation mark
    Have tried so many options from this site but nothing works.
    When I tried to update in device manager it says access denied
    Have also tried reboot without success
    Going absolutely mad need a real expert
    Pleeeaaase thanks

    Hi Brenni17,
    If you had an issue during an update and now having issues restoring your iPhone, you may find the troubleshooting steps outlined in the following article helpful (apologies if you have already seen it):
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. Any suggestions?

    My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC.  I hate to spend another $179 if this is just something I'm doing wrong. Please help

    I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
    If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
    A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11.

  • My ipad 2 is frozen, the email system was not working so i tried to turn it off and start again but it has refused to power down

    My Ipad 2 mail system was not working so i tried to power down to restart again but it has refused to power down and it also refuses to come on. i have held the power button for over a minute but there is no response.

    Have you tried basics from the manual?
    Restart 0- you tried.
    Reset?
    Restore?
    iPad 2 User Guide (For iOS 4.3 Software)

  • HT1752 my powerbook g4 will not boot up. i get a blue screen. i have tried to start up in safe mode, but get the same blue screen.

    My Powerbook G4 (with Snow Leopard operating system) will not boot up, I get a blue screen. I have tried to start up in safe mode by holding down shift key after startup tone, but end up with same result...blue screen. I need important photos and documents of this laptop, Even if I can just get it started up one more time. Need help fast! If you know what to do, please message back.

    In the text you say you are using Snow Leopard. Snow Leopard will not operate on a G4 (or any Mac with a PowerPC processor). Leopard OS 10.5 is the max OS for PowerPC processor Macs. Your profile shows OS 10.5.6. What OS are you using (or trying to use)?
    Will the PB boot using a systen install DVD?
     Cheers, Tom

  • My iPad says I am connected to wifi, but the internet won't work. I have tried turning wifi on/off and also resetting the network settings. Help!

    The past two days my iPad mini has not been working with the wifi at my house. There is also and iPhone 5 and an iPad air that are working perfectly fine. I don't know what to do

    Try forgetting the network, reboot your iPad and then try joining the network again.
    Settings>WiFi>Your network name>Forget this network. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    Go back to Settings>WiFi>Your network name>Enter your password>Tap Join.
    If that doesn't work, reset network settings. Settings>General>Reset>Reset Network Settings. Reboot the iPad again. Go back to Settings>WiFi>Your network name>Enter your password>Tap join.

  • HT1975 My location icon in the status bar never comes on even after trying everything. Location services are on but still cannot find my location in any app. :( HELP!

    I've tried to turn my location services on and still cannot be located.

    For location the iPod uses the location of nearby wifi routers that are in Apple's database. You do not have to be connected to the network/router to use that router's location. Thus, it appears that the iPod can't see a nearby router that is in Apple's database. Apple continuously updated their database based on info they obtain from iPhones. No one has been able to find a way to inform Apple of a router or correct is location.
    You can confirm that by going to place with a know located router like Starbucks or McDonalds

  • I can no longer scroll with the button on my touch pad. Have tried everything on Firefox help and still can't scroll....HELP please.

    I have just updated to the Firefox 4 Beta and from having no problems at all with the previous version I can now no longer scroll. I have reloaded my touch pad drivers and also been onto "about:config" and altered various things suggested by 'firefox help' and still no luck. The scroll button on the touch pad does still work as I can still scroll in Thunderbird and any of the other programs that I use, just not with Firefox any longer. Any suggestions would be gratefully received. Many thanks.

    Since today the scrolling started to work for me. Was there a fix auto installed? I havent updated anything that I know about.
    I might have uninstall an old Java JRE, don't remember when I did it, could that have done it?

  • I tried to download from the app store.  It will not download.  It shows up under "other purchases" but the action button is blank.  I have tried to re-download it and it won't let me do that either.  Any suggestions?

    Mavericks will not download from the app store.  It shows up under "other purchases" but the action button is grey and will not allow me to install, uninstall or redownload.  I meet the system requirements but nothing is working.  Any help would be appreciated!

    There is nothing wrong with my iTunes, is more of the App store that I am concerned about. And I've tried the "Authorise this computer" yes it does download when using iTunes, but no luck with App Store. And, yes I am logged onto iTunes when doing purchases.
    I find this really fustrating because the App store works fine on my ipod but once it comes to my macbook, it does not download. A few seconds later after I click on an app to download, the pop up message notifies me that the purchase cannot be downloaded.
    Anyways, thanks for your suggestion. 

  • The awsome bar doesn't work, I already tried to fix it with about:config but still no history. What should I do?

    I tried many things, but nothing has solved my problem yet. I tried changing the history settings and some settings in about:config --> autofill true, etc. I just doesn't autofill. What should I do?

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    You can also try to repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/

  • HT4718 FileVault 2, the Recovery System, and the use of Disk Utility

    I have FileVault 2 turned on for my Lion-equipped Powerbook Pro. When booting from the Recovery System, however, the Disk Utility thereon cannot even verify the internal HD, much less repair anything. I am aware that this is due to the encryption, of course.
    However, for external encrypted drives, all I need to do is enter the password to mount them. So is there something that one can do in order to get the Disk Utility on the Recovery System -- on this very same drive -- to recognize the main volume, in order to enable it to perform diagnostics?
    Secondarily, if I put the Powerbook Pro into target mode, and connect it to another Mac (which I have not tried yet) will I be able to mount it from the other computer if (A) It is running Lion OSX or higher, and (B) I can provide one or more of the login passwords?
    I am one who has always liked to keep my hard drives running smoothly (e.g using Disk Warrior, Drive Genius, Disk Utility...whatever). So this is a bit foreign to me to be unable to run at least basic diagnostics. Any input would be appreciated. Thanks.

    If you're talking about just the Recovery HD, you only need 1GB so use a 4GB USB thumb drive and the OS X Recovery Disk Assistant to create it.
    If you're talking about the ML installer (installESD.dmg) use an 8GB USB thumb drive.

  • Mac Book Pro on boot up, the apple sign will appear with the spinning wheel.  After some time, a grey screen wil appear with a movable mouse, but will not boot up.  Help!

    Mac Book Pro on boot up, the apple sign will appear with the spinning wheel.  After a period of time the screen will turn grey, but the mouse will still operate, but not boot up.

    If it was purchased brand new then it's running a version of Lion, so to reinstall Lion:
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.

Maybe you are looking for

  • Record Loss While posting GRN for subcontracting

    Hello folks! I am implementing subcontracting procedure for business. The issue arises at the time of GRN. If the quantity of received material is less than that in SC Purchase order, how to do its GRN and how is this loss will be recorded in SAP. Fo

  • My BT - "My Extras" will not load

    For some time now the My Extras section on My BT just refuses to load for me.  The spinning wheel goes on and on, and the content never loads.  I have tried this using both Safari and Firefox  with no luck.  My Extras does display normally on my iPad

  • How do i download my saved games to play on this site....????

    Hi my name is M. Watkins and i only downloaded this site to be able to play games here, P/S Can please give me a step by step plan on how to do this so i can play them.....????

  • At the time of migo,

    Hi at time of Migo, this document are generating Accounting document          : xxxxxxxx profitcenter docu            : xxxxxx special purpose ledger document : xxxxx material ledger                 : xxxxx I knw only about accouting doucment: invent

  • Printer problem  "Output Device LP01 is Locked by R/3"

    Hi BASIS Experts, user is printed Spoolrequest showing Status="-" , outputrequest is not generated, in SP01 listof spoolrequest selecting the Spool no(Check box)  and Clicking PrintDirectly it is showing message "Output Device LP01 is Locked by R/3"