HT201468 bootcamp won't recognise 64/32 bit as a 64 bit installation

Should be comptible with both, no?

The 'full' retail version contains both DVDs. You can also use an ISO from Microsoft and burn just the 64-bit disk. The BCA installer does not recognize a combined disk.

Similar Messages

  • Iphone 5 won't recognise itunes 64 bit

    Loving my new iphone, but suddenly it won't speak to itunes, which I'm running on Windows 7.
    itunes says I have to have the 64 bit version running - but I have, and have downloaded and reinstalled several times to make sure.
    Please can anyone help?

    I had a similar problem and after much trial and error, I found a process that worked for me.  I hope this works for you guys and best of luck!!
    Have Patience!!!!!!!
    Unplug all Apple Devices from your USB ports or any other ports
    Restart your computer
    Open up Control Panel> Programs > Uninstall Programs
    Click the “Publisher” to list the programs by publisher
    Uninstall iTunes and Restart the computer
    Repeat Steps 4-5 and uninstall all Apple Inc. programs (NOTE: If a program does not successfully uninstall, attempt to Repair it first)
    Upon uninstalling all programs by Apple Inc. restart your computer
    Delete all these folders:
    C:\Program Files (x86)\QuickTime\
    C:\Windows\SysWOW64\QuickTime
    C:\Windows\SysWOW64\QuickTimeVR
    C:\Program Files (x86)\Bonjour
    C:\Program Files (x86)\Common Files\Apple\
    C:\Program Files (x86)\iTunes
    Restart the computer
    Remove all Apple Inc. entries from your registry (For this step I would recommend using CCleaner or aprogram like it if you are not familiar with the RegEdit command… I personallyused CCleaner which can be downloaded for free from www.download.com)
    Once you have removed all registry entries from Apple Inc. restart your computer.
    Do one more check to ensure that all registry errors and Apple Inc. entries are removed (which include iTunes, Bonjour, QuickTime, etc)
    Do another quick check to make sure all Apple Inc. programs are uninstalled from the control panel, all the folders are deleted from Step 9 and the registry is clean.
    One more restart and then download iTunes and the installation should go through flawlessly
    I hope this works for you guys!! I just downloaded iTunes 10.5 and updated my phone to iOS 5.

  • Windows XP in bootcamp won't recognise more than 2GB of RAM?

    Hello.
    I use a Mac Pro (2008) with Mac OS X (10.5.8) and I run Windows XP using bootcamp for games. I recently installed an extra 4GB of memory which Mac OS recognizes fine, but XP can only recognize 2GB.
    Is this normal or does anyone know a fix/reason for this?
    Thanks.

    Actually, Windows XP on any computer can only address about 2.5 GB of RAM. Even on PC if you you want to use more you'll need Vista or Windows 7. Both version recognize ram on my PCs and Macs with Boot Camp. I use Home Ultimate and have no problems.

  • Bootcamp won't allow me to install windows 7 32bit

    hello everyone,
    so i am having quite a big problem at the moment. i almost tried everything but it seems like my mac won't let me install windows 7 32 bit.
    first i tried to do it with the install disc but for somehow my mac keeps ejecting it but other discs run fine. now my macbook has no problem with it so i put it in firewire mode and tried to run the disc from there and just make the partition myself. so i partitioned by disc with (fat) but when i try to run the windows disc in boot mode it says there aren't any bootable devices. also i am unable to see my partition in the boot mode but it does show up on my desktop. now after some research on the internet i tried to make an .iso image from the disc and put it on a usb and my desktop, now bootcamp won't recoqnise it and it also doesn't have this 'make a install disc from .iso image' or something in that direction. so i am really stuck at the moment, the only solution i can think of is downgrading my bootcamp to bootcamp 4 so i do have this iso image option. it is really frustrating
    help is appriciated.
    best regards,
    stan
    (sorry for no caps my caplock button is brooke)

    Follow the Boot Camp 5.x FAQ and HOW TO and the pdf guide and instructions in Boot Camp Assistant.
    Then use Windows 7 64-bit. No one today should be using 32-bit, unless maybe in a VM, but not when running Windows natively.

  • Windows7 machine which won't recognise the driver for my iPod Touch when I plug in the usb charger, even though I have an iTunes account installed (latest version). Does anyone know what I can do?  Thanks

    I have just started using a windows7 64 bit machine which is an LG emachines model.  I have latest version of iTunes installed.  When I connect the usb charger it says I need digitally authorised drivers and won't recognise the iPod.  Does anyone know of a fix?
    Thanks
    Karen

    Try lowering your User Account Controls.
    Control Panel > User Accounts

  • ITunes won't recognise my iPad since the latest update.

    iTunes won't recognise my iPad since the latest update. I have tried the solution on http://support.apple.com/kb/TS1538, twice over but with no result.
    I have repaired each of the iTunes elements and restarted both the computer and the iPad several times.
    I have Windows Vista Ultimate 64-bit operating system.
    Processor: Intel (R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz 2.40 GHz
    iOS 8.0.2 iPad 64GB

    Hi Skydiver119
    Thanks for your reply. That was what the solution I found on that link I posted, except it said to include the 'Bonjour' too. I've uninstalled everything, downloaded the latest iTunes, reinstalled and restarted the computer twice, but it still won't recognise the iPad. I've also rebooted the iPad each time.
    Any other ideas on what might work?
    Thanks in advance

  • FCE log & transfer won't recognise DSLR

    Hi,
    I have a problem where for some reason log & transfer on FCE won't recognise my camera, I have a Canon 60D (DSLR). I have tried putting the SD card straight into the computer & also by plugging the camera into the computer via cord.
    However I am still able to import footage, I import from the SD card into iPhoto, go onto Final Cut & import. Yet for some reason when any footage, picture or text is imported to Final Cut Express, the footage is always degraded, that's why I thought log & transfer would be useful. If anyone could help that would be great.
    Thanks.
    Cam

    This first one is from the browser:
    Name     MVI_7136.MOV
    Type     Clip
    Creator     QuickTime Player
    Source     Macintosh HD:Users:Cameron:Desktop...
    Offline     -
    Size     1.1 GB
    Last Modified     -
    Tracks     1V, 2A
    Vid Rate     23.98 fps
    Frame Size     1920 x 1080
    Compressor     H.264
    Date Rate     5.6 MB/sec
    Pixel Aspect     Square
    Anamorphic     -
    Field Dominance     None
    Alpha     None/Ignore
    Reverse Alpha     -
    Composite     Normal
    Audio     1 Stereo
    Aud Rate     48.0 KHz
    Aud Format     16-bit Integer
    This is the same clip but dragged into the sequence timeline, this was the only difference:
    Vid Rate     29.97 fps
    Frame Size     720 x 480
    Thanks for your help, really appreciate it.

  • I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there.  I've uninstalled iTunes and reinstalled twice and it's not working.  Please help.

    I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there.  I've uninstalled iTunes and reinstalled twice and it's not working.  Please help.

    I have not had wifi since November when I upgraded to the newest IOS version.  I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again.  I kept doing what they told me and it worked for a couple more days and then I could never turn it on again.  My blue tooth doesn't work either.  I had to actually increase my data usage with AT&T becuase of this.  When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue.  My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!!  I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue.  Who knows how many people out there have had this issue and have not said anything about it.  Now there is a newer update that I can't do because it requires wifi in order to download.
    June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

  • Is there a problem with IM and FaceTime as it won't recognise my Apple ID

    is there a problem with IM and FaceTime as it won't recognise my Apple ID?

    There are reports that iMessage and FaceTime are down.

  • BLACKBERRY TORCH - won't turn on and desktop manager won't recognise it - I can't get my contacts

    Hi all,
    I'm new to this so please bare with me.
    I'll try and be as brief as possible. Up until last week I had the Blackberry Torch 9800. I was due an upgrade and about two days before I went to contact my network provider my Torch battery died (it wasn't broken at this point, it just was drained and needed charged) so I went to charge it and it did that thing where the battery was so dead it wouldn't even switch on whilst charging.
    I plugged it in and rather than charge like normal it was completely dead and the only activity it offered me was two red flashing lights as it 'charged'. From that moment on it has not turned on. Dead as can be. If I plug to charge (wall charger OR USB port) I get the two bright red flashing notification lights but it will not go on.
    Anyway rather than send it to be repaired I opted for a new phone as I was due an upgrade anyway and intended on doing so whether the Torch was alive and kicking at this point or not. Cut a long story short I got my new blackberry (9360 curve) it is all set up with my e-mail etc, media card and same sim card swapped over but as Blackberry insist on your contact numbers being saved to the handset and not the sim my contacts are stuck in my Torch 9800.
    When I go to plug the Torch in to Desktop manager to get the contacts saved to there and then sync over to my new handset the Torch is so dead that DManager won't even read/recognise it. My network say since this is not an issue with network etc they can't really help and gave me a number for Blackberry services in England somewhere (they are office hrs so can't phone until Monday morning).
    Please can someone help? I have my new 9360 all up and running but my contacts are stuck in my Torch and that is the only place they are? DManager won't recognise the Torch because it is dead - except the two flashing lights - and therefore won't let me at the contacts that way.
    ANY help would be appreciated - please not too techinal as not great with all of that side of things!
    Sorry for the long post.
    Sco123.

    Sco123 wrote:
    Sorry for the long post.
    Sco123.
    Then let me counter with a short reply:
    www.blackberry.com/btsc/KB10144 .
    Cheers. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • ITunes won't recognise my iPod on USB 2.0, only 1.1

    my computer won't recognise my iPod touch 1.1.4 when it is connected via my USB 2.0 PCI card, only when it is plugged in via the motherboards inbuilt USB 1.1 ports. I have plugged it into other computers (all pc's) and it works fine on their USB 2.0 ports.
    What could be causing this?
    cheers.

    Try this if you have not already. This removes and reinstalls ALL Apple software and sometimes that is required.

  • HELP NEEDED! My wife's 5c won't recognise on my laptop anymore. I plug it in and the laptop makes a sound but won't show up the phone. I only recently discovered this problem when I upgraded. It will recognise my 5c and even the iPad but not her 5c

    I discovered this problem when I upgraded my iPhone 4 to a 5c.
    My laptop will recognise my 5c and even the wife's iPad but won't recognuse her 5c, when I plug it in it makes a sound but just doesn't show up in iTunes.
    It DID work on my laptop as recently as November when I backed up her phone and updated her software but like I say ever since I upgraded it just won't recognise her 5c but does mine.
    I just can't think what is wrong? I haven't messed around with anything on the laptop or messed around with the wife's settings on her 5c
    HELP!!!!

    I would test with another computer and another cable
    if it the device would not be detected by any computer I
    would say that it's connector was broken

  • My iPad won't recognise my air printer, it is connected as I checked by typing in IP address into Safari, but when I try to print it just says cannot find any air printers.

    my Ipad won't recognise my printer. It is connected as I have typed the IP address into Safari which confirms connectivity. Spoken with canon who suggest it it is a problem with IOS not recognising the functionality. When I try to print it says cannot find any air printers. Printer is working via LAN set up on my laptop. Don't want to have to spend £25 to speak to an apple support team. Has anyone else experienced this problem. Printer is a canon MG 3250.

    A few things you could try:
    Reboot your modem/router.
    Turn your printer off then on again & make sure it's connected to the network.
    Reboot your iPad holding down the home & sleep/wake buttons simultaneously until the apple logo appears then release & let the iPad boot up normally.
    Try going into Settings on your iPad & select General->Reset->Reset Network Settings.
    Also, have a look at this:
    http://www.canon.ca/support_images/KB_Images/Shared_wifi_documents/How_to_Print_ Using_Apple_AirPrint_NEW.pdf

  • Display Quality issue after updating to Bootcamp 3.1 (windows 7 64-bit)

    I managed to install Windows 7 64-bit without issues (all issues got resolved after installing bootcamp 3.0 from the OSX DVD).
    Then I saw the BootCamp update for windows 7 64-bit as being (Recommended) and I installed it...
    after that I got a problem in the screen where I get low quality in gradient colors.
    I tried installing the ATI Radeon 4850 Driver from the ATI website , but without any luck, the driver is identified correctly and color depth (32-bit) , but still the quality isn't acceptable.
    Anyone facing similar issue? please advise ? I tried restore point but it failed.
    Any suggestions?

    RegrettingSwitch wrote:
    I think that any of you expecting (as I was) non-mobility cards are going to
    be disappointed (as I am). SiSoft Sandra definitely reports Radeon HD4850
    Mobility in my iMac, which is the reason I can't install the latest Catalyst
    Are you sure? Since both CPU-Z 1.53.1 and Catalyst Control Center are stating that my graphic card is a ATI Radeon HD 4850 (device ID 944A).. :S
    So, Bootcamp 3.1 seems to have solved nothing (plugging headphones in still
    jumps one core straight to ~100%) and actually created a problem that didn't
    exist - i.e colour banding!. And, obviously, no software fix is going address
    You could try to roll back the driver. I've more or less the instruction written in this thread and at the moment, with 8.661 version of the driver I don't have the color banding issue (I've to test stability yet, since it seems that this driver version is quite more unstable).
    However, yeah I feel your disappointment, I'm a Mac user since 2001, changed several macs and this is the first one that comes with so much issues.

  • HT4407 When installing Windows 7 using Bootcamp, I get message: "Need 64-bit Windows Installation USB drive or DVD."  I thought my install disk was for 32 or 64 bit.  What does this mean?

    When Installing Windows 7 using Bootcamp, I get message:  "Need 64 bit Windows installation USB drive or DVD."  What does this mean?

    It means you need the 64 bit Version of Windows on a USB stick or DVD.

Maybe you are looking for